Electrospun Poly-ε-Caprolactone (PCL)/Dicalcium Phosphate Dihydrate (DCPD) Composite Scaffold for Tissue Engineering Application

Advancements in scaffold for treating ligament injuries; in vitro evaluation

Tendon/ligament (T/L) injuries are a worldwide health problem that affects millions of people annually. Due to the characteristics of tendons, the natural rehabilitation of their injuries is a very complex and lengthy process. Surgical treatment of a T/L injury frequently necessitates using autologous or allogeneic grafts or synthetic materials. Nonetheless, these alternatives have limitations in terms of mechanical properties and histocompatibility, and they do not permit the restoration of the original biological function of the tissue, which can negatively impact the patient's quality of life. It is crucial to find biological materials that possess the necessary properties for the successful surgical treatment of tissues and organs. In recent years, the in vitro regeneration of tissues and organs from stem cells has emerged as a promising approach for preparing autologous tissue and organs, and cell culture scaffolds play a critical role in this process. However, the biological traits and serviceability of different materials used for cell culture scaffolds vary significantly, which can impact the properties of the cultured tissues. Therefore, this review aims to analyze the differences in the biological properties and suitability of various materials based on scaffold characteristics such as cell compatibility, degradability, textile technologies, fiber arrangement, pore size, and porosity. This comprehensive analysis provides valuable insights to aid in the selection of appropriate scaffolds for in vitro tissue and organ culture.

Preparation and characterization of electrospun polycaprolactone/brushite scaffolds to promote osteogenic differentiation of mesenchymal stem cells

Bone tissue engineering aims to develop effective strategies for repairing or replacing damaged bone tissue. In this study, composite scaffolds consisting of dicalcium phosphate dihydrate (DCDP, brushite) as a bone phase mineral precursor with different weight percentages (0%, 1%, 3%, 5%, and 10%) in combination with polycaprolactone (PCL) were fabricated by electrospinning technique. The morphology and mechanical behavior of scaffolds were characterized using scanning electron microscopy and tensile strength test, respectively. The bioactivity of scaffolds was assessed in simulated body fluid. Adhesion, viability, proliferation, and differentiation of mesenchymal stem cells derived from the human bone marrow on scaffolds were investigated using electron microscopy, MTT assay, live-dead assay, alizarin red staining, alkaline phosphatase activity and, gene expression analysis by real-time PCR. The results showed that the scaffold containing 3 wt. % of DCDP had the highest tensile strength (15.35 MPa). Furthermore, cells seeded on scaffolds showed over 80% viability after 1, 3, 7 days of incubation. Also, the results showed that the addition of DCDP to the PCL significantly increased the alkaline phosphatase activity. The osteocalcin gene expression in the composite scaffold showed a 6.1-fold increase compared to the pure PCL scaffold. It is concluded that electrospun PCL scaffolds containing DCDP with optimum concentration can be a proper candidate for bone tissue engineering applications.

The Structure and Function of Next-Generation Gingival Graft Substitutes-A Perspective on Multilayer Electrospun Constructs with Consideration of Vascularization

There is a shortage of suitable tissue-engineered solutions for gingival recession, a soft tissue defect of the oral cavity. Autologous tissue grafts lead to an increase in morbidity due to complications at the donor site. Although material substitutes are available on the market, their development is early, and work to produce more functional material substitutes is underway. The latter materials along with newly conceived tissue-engineered substitutes must maintain volumetric form over time and have advantageous mechanical and biological characteristics facilitating the regeneration of functional gingival tissue. This review conveys a comprehensive and timely perspective to provide insight towards future work in the field, by linking the structure (specifically multilayered systems) and function of electrospun material-based approaches for gingival tissue engineering and regeneration. Electrospun material composites are reviewed alongside existing commercial material substitutes’, looking at current advantages and disadvantages. The importance of implementing physiologically relevant degradation profiles and mechanical properties into the design of material substitutes is presented and discussed. Further, given that the broader tissue engineering field has moved towards the use of pre-seeded scaffolds, a review of promising cell options, for generating tissue-engineered autologous gingival grafts from electrospun scaffolds is presented and their potential utility and limitations are discussed.

Influence of Fish Scale-Based Hydroxyapatite on Forcespun Polycaprolactone Fiber Scaffolds

Marine waste byproducts, especially fish scales, have proved to be one of the most prominent sources for developing sustainable materials for various applications including biomedical applications. Hydroxyapatite (HAp), being one of such biomaterials that can be synthesized from the massive fish-based waste, has received plentitude of attention due to its excellent ability to promote cell growth and proliferation. However, understanding the influence of HAp on polymer matrices that are tailored for biomedical applications is still a challenge. This study is intended to develop a sophisticated yet inexpensive method to obtain nonwoven polycaprolactone (PCL) nanofibrous scaffolds and analyze the influence of calcium-deficient nanoporous hydroxyapatite (n-HAp) on the thermal, mechanical, and biological properties of these scaffolds. The n-HAp is synthesized using two different types of fish scales, carpa (CA) and pink perch (PP), by calcination followed by nanomilling. The synthesized n-HAp powder is characterized by using X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy. The PCL fibrous scaffolds were developed using a novel forcespinning technique with n-HAp as the filler. The morphology of the scaffolds was characterized using SEM and Raman spectroscopy. SEM and TEM results have confirmed the size reduction of the HAp powder after nanomilling. Thermal properties were analyzed using thermogravimetric analysis and differential scanning calorimetry. The major degradation temperature has increased by 3° and was observed to be 398° for 1 wt % filler loading for both carpa and pink perch-derived n-HAp. The increase in filler content has increased the residue left after decomposition and is 4% for 5 wt % filler loading. The crystallinity percent has increased by 7% compared to neat fibers for 1 wt % filler loading. Mechanical properties were tested using tensile tests. The tensile test strength has shown 32% improvement for 1 wt % compared to neat fibers. Cell viability tests were performed using hFOB cells which have shown significant cell growth for a high filler loading of 5 wt %. The results suggest that both CA-n-HAP and PP-n-Hap-incorporated fibrous scaffolds can be used potentially for biomedical applications after careful investigation of the scaffold behavior with longer incubation periods.

Fabrication and physicochemical characterization of a novel magnetic nanocomposite scaffold: Electromagnetic field effect on biological properties

In the current research, a novel poly(ε-caprolactone) nanofibrous composite scaffold including CZF-NPs¹ (cobalt‑zinc ferrite nanoparticles) was investigated to study the physical, mechanical and biological properties of new magnetic nanofibrous materials and then to evaluate the effect of applied electromagnetic field on biological properties of these scaffolds. It was observed that the incorporation of CZF-NPs up to 3 wt.% leads to decrease in nanofibers' diameter to 466 nm. By raising the content of CZF-NPs, hydrophilicity and biodegradation of magnetic nanofibrous scaffolds improved significantly. In addition, the mechanical properties of nanofibers such as stress at break point was interestingly increased in the sample with 3 wt.% of CZF-NPs. The results of biocompatibility, cell adhesion and cell staining assays with L929 cells are much more improved in nanofibers embedded with CZF-NPs in the presence of external electromagnetic field (EMF). According to this study, magnetic nanofibrous scaffolds composed of PCL/CZF-NPs could be considered as a promising candidate to regenerate damaged tissues.