Comparative self-assembly studies and self-sorting of two structurally isomeric naphthalene-diimide (NDI)-gelators

Process Dependent Complexity in Multicomponent Gels

Mixing low molecular weight gelators (LMWGs) can be used to combine favorable properties of the individual components within a multifunctional gel. Such multicomponent systems are complex enough in themselves but the method of combining components is not commonly considered something to influence self-assembly. Herein, two multicomponent systems comprising of a naphthalene-based dipeptide hydrogelator and one of two modified naphthalene diimides (NDIs), one of which forms gels, and the other does not, are investigated. These systems are probed, examining the structures formed and their gel properties (when preparing a solution from either a mixed powder of both components or by mixing pre-formed solutions of each component) using rheology, small angle neutron scattering (SANS), and absorbance spectroscopy. It is found that by altering the method of preparation, it is can either induce self-sorting or co-assembly within the fibers formed that underpin the gel network.

Multi-component hybrid hydrogels - understanding the extent of orthogonal assembly and its impact on controlled release

This paper reports self-assembled multi-component hybrid hydrogels including a range of nanoscale systems and characterizes the extent to which each component maintains its own unique functionality, demonstrating that multi-functionality can be achieved by simply mixing carefully-chosen constituents. Specifically, the individual components are: (i) pH-activated low-molecular-weight gelator (LMWG) 1,3;2,4-dibenzylidenesorbitol-4',4''-dicarboxylic acid (DBS-COOH), (ii) thermally-activated polymer gelator (PG) agarose, (iii) anionic biopolymer heparin, and (iv) cationic self-assembled multivalent (SAMul) micelles capable of binding heparin. The LMWG still self-assembles in the presence of PG agarose, is slightly modified on the nanoscale by heparin, but is totally disrupted by the micelles. However, if the SAMul micelles are bound to heparin, DBS-COOH self-assembly is largely unaffected. The LMWG endows hybrid materials with pH-responsive behavior, while the PG provides mechanical robustness. The rate of heparin release can be controlled through network density and composition, with the LMWG and PG behaving differently in this regard, while the presence of the heparin binder completely inhibits heparin release through complexation. This study demonstrates that a multi-component approach can yield exquisite control over self-assembled materials. We reason that controlling orthogonality in such systems will underpin further development of controlled release systems with biomedical applications.

Encapsulation induced aggregation: a self-assembly strategy for weakly pi-stacking chromophores

Confinement of weakly pi-stacking dyes within a micellar core leads to a rapid aggregation.

H-bonding directed programmed supramolecular assembly of naphthalene-diimide (NDI) derivatives

In this review we have collated various supramolecular designs, all surrounding H-bonding among well-known functional groups (peptides, nucleic acids, amides, ureas, carboxylic acids, pyridine-hydroxyls, urethanes, imides and others), to dictate self-assembly of naphthalenediimide (NDI) π-systems (both small molecules and polymeric building blocks) that exhibit several exciting features including strong propensity for π-π interactions, π-acidity, excellent n-type semiconductivity, CT-complexation, ion-π interactions, ring-substitution dependent redox properties and photophysical properties. This article reveals that H-bonding can indeed serve as a very powerful and versatile tool to programmed self-assembly of a single or multiple dye system producing a wide range of tailored soft materials, including fibrillar gels, chromonic mesophases, foldamers, nanotubes, vesicles, reverse micelles and polymersomes, both in water and organic medium with distinct photophysical properties, charge transport properties, conductivity properties and functional group displays that are highly relevant in the fields of biology and organic electronics.

Multicomponent low molecular weight gelators

We discuss the potential and challenges of multicomponent low molecular weight gels.

More than meets the eye: conformational switching of a stacked dialkoxynaphthalene-naphthalenetetracarboxylic diimide (DAN-NDI) foldamer to an NDI-NDI fibril aggregate

The thermally induced conformational switching of a stacked dialkxoynaphthalene-naphthalenetetracarboxylic diimide (DAN-NDI) amphiphilic foldamer to an NDI-NDI fibril aggregate is described. The aggregated fibril structures were explored by UV/Vis, circular dichroism (CD), atomic-force microscopy (AFM), and TEM techniques. Our findings indicate that the aromatic DAN-NDI interactions of the original foldamer undergoes transformation to a fibrillar assembly with aromatic NDI-NDI stacked interactions. These structural insights could help inform new molecular designs and increase our understanding of fibrillar assembly and aggregation process in aqueous solution.

Tunable morphology and mesophase formation by naphthalene-containing poly(aryl ether) dendron-based low-molecular-weight fluorescent gels

Novel poly(aryl ether) dendron-based low-molecular-weight organogelaters (LMWG) containing naphthalene units at the core have been synthesized, and the self-assembly of the system has been examined in a variety of solvents and solvent mixtures. The compounds readily form gels with attractive critical gel concentration values associated with gelation-induced enhanced emission (GIEE). In addition to the remarkable properties of the previously reported anthracene and pyrene analogues (Rajamalli, P.; Prasad, E. Org. Lett.2011, 13, 3714 and Rajamalli, P.; Prasad, E. Soft Matter2012, 8, 8896), the self-assembled systems exhibit distinctly different structure-property relationships. Unlike the reported ones, the present system forms sheetlike morphology in nonpolar solvent mixtures, giant vesicles in polar solvent mixtures, and lamellar or hexagonal columnar phases in single solvents. The unique properties of the self-assembled systems, which were analyzed through electron microscopic (SEM, TEM, AFM) and spectroscopic techniques (POM, fluorescence), are attributed to the replacement of anthracene/pyrene units by naphthalene units. The present work unravels the subtle role of minute structural change in altering the properties of LMWGs based on poly(aryl ether) dendrons.

Hydrogen-bonding induced alternate stacking of donor (D) and acceptor (A) chromophores and their supramolecular switching to segregated states

This paper reports comprehensive studies on the mixed assembly of bis-(trialkoxybenzamide)-functionalized dialkoxynaphthalene (DAN) donors and naphthalene-diimide (NDI) acceptors due the cooperative effects of hydrogen bonding, charge-transfer (CT) interactions, and solvophobic effects. A series of DAN as well as NDI building blocks have been examined (wherein the relative distance between the two amide groups in a particular chromophore is the variable structural parameter) to understand the structure-dependent variation in mode of supramolecular assembly and morphology (organogel, reverse vesicle, etc.) of the self-assembled material. Interestingly, it was observed that when the amide functionalities are introduced to enhance the self-assembly propensity, the mode of co-assembly among the DAN and NDI chromophores no longer remained trivial and was dictated by a relatively stronger hydrogen-bonding interaction instead of a weak CT interaction. Consequently, in a highly non-polar solvent like methylcyclohexane (MCH), although kinetically controlled CT-gelation was initially noticed, within a few hours the system sacrificed the CT-interaction and switched over to the more stable self-sorted gel to maximize the gain in enthalpy from the hydrogen-bonding interaction. In contrast, in a relatively less non-polar solvent such as tetrachloroethylene (TCE), in which the strength of hydrogen bonding is inherently weak, the contribution of the CT interaction also had to be accounted for along with hydrogen bonding leading to a stable CT-state in the gel or solution phase. The stability and morphology of the CT complex and rate of supramolecular switching (from CT to segregated state) were found to be greatly influenced by subtle structural variation of the building blocks, solvent polarity, and the DAN/NDI ratio. For example, in a given D-A pair, by introducing just one methylene unit in the spacer segment of either of the building blocks a complete change in the mode of co-assembly (CT state or segregated state) and the morphology (1D fiber to 2D reverse vesicle) was observed. The role of solvent polarity, structural variation, and D/A ratio on the nature of co-assembly, morphology, and the unprecedented supramolecular-switching phenomenon have been studied by detail spectroscopic and microscopic experiments in a gel as well as in the solution state and are well supported by DFT calculations.