Isolation, Identification and Characterization of Two Aluminum-Tolerant Fungi from Acidic Red Soil

Functional Surfaces for Passive Fungal Proliferation Control: Effect of Surface Micro- and Nanotopography, Material, and Wetting Properties

Fungal proliferation can lead to adverse effects for human health, due to the production of pathogenic and allergenic toxins and also through the creation of fungal biofilms on sensitive surfaces (i.e., medical equipment). On top of that, food spoilage from fungal activity is a major issue, with food losses exceeding 30% annually. In this study, the effect of the surface micro- and nanotopography, material (aluminum, Al, and poly(methyl methacrylate), PMMA), and wettability against Aspergillus awamori is investigated. The fungal activity is monitored using dynamic conditions by immersing the surfaces inside fungal spore-containing suspensions and measuring the fungal biomass growth, while the surfaces with the optimum antifungal properties are also evaluated by placing them near spore suspensions of A. awamori on agar plates. Al- and PMMA-based superhydrophobic surfaces demonstrate a passive-like antifungal profile, and the fungal growth is significantly reduced (1.6-2.2 times lower biomass). On the other hand, superhydrophilic PMMA surfaces enhance fungal proliferation, resulting in a 2.6 times higher fungal total dry weight. In addition, superhydrophobic surfaces of both materials exhibit antifouling and antiadhesive properties, whereas both superhydrophobic surfaces also create an "inhibition" zone against the growth of A. awamori when tested on agar plates.

Mitigating aluminum toxicity and promoting plant resilience in acidic soil with Penicillium olsonii TLL1

Aluminum (Al), prevalent in the crust of the Earth, jeopardizes plant health in acidic soils, hindering root growth and overall development. In this study, we first analysed the Al- and pH- tolerance of the Penicillium olsonii TLL1 strain (POT1; NRRL:68252) and investigated the potential for enhancing plant resilience under Al-rich acidic soil conditions. Our research illustrates the extraordinary tolerance of POT1 to both high Al concentrations and acidic conditions, showcasing its potential to alleviate Al-induced stress in plants. Metabolite analysis revealed that POT1 detoxifies Al through organic acid-dependent chelation mechanisms, significantly reducing Al stress in Arabidopsis and Pak Choi plants. Consequently, plant growth conditions improved, and the Al content in plant tissues decreased. Transcriptome analysis indicated that POT1 treatment downregulates genes associated with Al and oxidative stress such as MATE, ALS3, NIP1-2 and several peroxidases, highlighting its effectiveness in lessening Al-induced damage. Comparative assessments highlight the superior performance of POT1 compared to other Al-tolerant Penicillium species, attributed to its ability to thrive in diverse pH levels and effectively detoxify Al. These findings position POT1 as a promising agent for enhancing crop resilience in Al-compromised acidic soils, offering new avenues for promoting plant health and bolstering food security through increased crop yield and safety.

Aluminum Biorecovery from Wastewaters

Aluminum biorecovery is still at an early stage. However, a significant number of studies showing promising results already exist, although they have revealed problems that need to be solved so aluminum biorecovery can have a wider application and industrial upscaling. In this chapter, we revise the existing knowledge on the biorecovery of aluminum from different sources. We discuss the design, overall performance, advantages, technical problems, limitations, and possible future directions of the different biotechnological methods that have been reported so far. Aluminum biorecovery from different sources has been studied (i.e., solid wastes and primary sources of variable origin, wastewater with low concentrations of dissolved aluminum at pH-neutral or weakly acidic conditions, and acidic mine waters with high concentrations of dissolved aluminum and other metal(loid)s) and has shown that the process efficiency strongly depends on factors such as (1) the physicochemical properties of the source materials, (2) the physiological features of the used (micro)organisms, or (3) the biochemical process used. Bioleaching of aluminum from low-grade bauxite or red mud can much be achieved by a diverse range of organisms (e.g., fungi, bacteria) with different metabolic rates. Biorecovery of aluminum from wastewaters, e.g., domestic wastewater, acidic mine water, has also been accomplished by the use of microalgae, cyanobacteria (for domestic wastewater) or by sulfate-reducing bacteria (acidic mine water). In most of the cases, the drawback of the process is the requirement of controlled conditions which involves a continuous supply of oxygen or maintenance of anoxic conditions which make aluminum biorecovery challenging in terms of process design and economical value. Further studies should focus on studying these processes in comparison or in combination to existing economical processes to assess their feasibility.

Effects of simulated acid rain on hydrochemical factors and microbial community structure in red soil aquifers

Acid rain can lower the pH of groundwater and affect its hydrogeochemistry and microbial ecology. However, the effects of acid rain on the hydrogeochemistry and microbial ecology of red soil groundwater systems in southern China are poorly understood. Previous research had mainly investigated the sources and patterns of groundwater acidification, but not the microbial mechanisms that contribute to this process and their associations with hydrochemical factors. To address this knowledge gap, we conducted a soil column experiment to simulate the infiltration of acid rain through various filter materials (coarse, medium, and fine sand) and to examine the hydrochemical and microbial features of the infiltrate, which can reveal how simulated acid rain (pH 3.5-7.0) alters the hydrochemistry and microbial community composition in red soil aquifers. The results showed that the pH of the leachate decreased due to simulated acid rain, and that the leaching efficiency of nitrogen and metal ions was influenced by the particle size of the filter media. Illumina 16S rRNA gene sequencing revealed that the leachate was dominated by Proteobacteria, Patescibacteria, Actinobacteria, and Acidobacteria, with Proteobacteria accounting for 67.04-74.69% of the bacterial community and containing a high proportion of nitrifying and denitrifying bacteria. Additionally, several genera with heavy metal tolerance, such as Burkholderia-Caballeronia-Paraburkholderia, Delftia, Methylversatilis, Aquicella, and Ralstonia, were widely distributed in the leachate, indicating the strong adaptive capacity of the microbial population. A correlation analysis between the hydrochemical factors and the microbial community structure revealed that pH was the most influential factor, followed by NO2--N, Fe, Al, Cu, Mn, and others. These results indicate that acidification modifies the hydrochemical conditions of the aquifer, creating an environment that is unfavorable for microbial growth and survival. However, some microorganisms may acquire resistance genes to cope with environmental changes.