Application of Dispersive Liquid–Liquid Micro-extraction Using Mean Centering of Ratio Spectra Method for Trace Determination of Mercury in Food and Environmental Samples

Recent applications and novel strategies for mercury determination in environmental samples using microextraction-based approaches: A review

The growing need to monitor Hg levels in the environment to control its emissions and evaluate the effectiveness of reduction policies is driving the scientific community to focus efforts on creating analytical methods that are simpler, lower cost, more performing, and environmentally sustainable. In this context, an important contribution is provided by microextraction techniques, which have long proven to be simple, reliable, and to ensure an environmentally responsible sample preparation. This manuscript reviews the recent progress in the determination of environmental Hg using microextraction techniques. The considered studies involve all environmental compartments (i.e., air, water, soil, and biota) and have been discussed by grouping them according to the employed technique while pointing out the main advances achieved and the most important limitations. The ultimate goal is to provide an up-to-date overview of the analytical potential of microextraction techniques that can be exploited in various investigation fields and to highlight the most important knowledge gaps that should be addressed in the coming years, such as in-situ sampling, the use of natural materials, and the value of metrological support to obtain data SI-traceable and comparable.

Task specific monolith for magnetic field-reinforced in-tube solid phase microextraction of mercury species in waters prior to online HPLC quantification

In this study, a novel sorbent based on task specific monolith doped with Fe₃O₄ was in situ fabricated in capillary and acted as the extraction medium of magnetic field-reinforced in-tube solid phase microextraction (MFR/IT-SPME) to trap and preconcentrate mercury species which were coordinated with dithizone to form chelates. Various characterization technologies evidenced that the obtained monolithic adsorbent presented porous and super paramagnetic properties, and possessed abundant functional groups. Results evidenced that the implementation of magnetic field during extraction stages enhanced the extraction efficiency of studied Hg chelates from 48.5% to 75.3% to 69.9-94.4%. Under the optimized extraction parameters, the introduced MFR/IT-SPME was online coupled to HPLC/DAD to quantify mercury species at ultra-trace levels in various water samples. Limits of detection varied from 0.0067 μg/L to 0.016 μg/L, and the RSDs for precision were below 7.5%. Additionally, related extraction mechanism was deduced and revealed multiple forces co-contributed to the enrichment. The reliability and accuracy of suggested online approach for speciation analysis of mercury was well proved by confirmatory experiments.

Application of liquid-phase microextraction to the analysis of plant and herbal samples

INTRODUCTION

The analysis of plant and herbal samples is a challenging task for analytical chemists due to the complexity of the matrix combined with the low concentration of analytes. In recent years different liquid-phase microextraction (LPME) techniques coupled with a variety of analytical equipment have been developed for the determination of both organic and inorganic analytes.

OBJECTIVE

Over the past few years, the number of research papers in this field has shown a markedly growing tendency. Therefore, the purpose of this review paper is to summarise and critically evaluate research articles focused on the application of LPME techniques for the analysis of plant and herbal samples.

RESULTS

Due to the complex nature of the samples, the direct application of LPME techniques to the analysis of plants has not often been done. LPME techniques as well as their modalities have been commonly applied in combination with other pretreatment techniques, including a solid-liquid extraction technique supported by mechanical agitation or auxiliary energies for plant analysis. Applications and the most important parameters are summarised in the tables.

CONCLUSION

This review summarises the application of the LPME procedure and shows the major benefits of LPME, such as the low volume of solvents used, high enrichment factor, simplicity of operation and wide selection of applicable detection techniques. We can expect further development of microextraction analytical methods that focus on direct sample analysis with the application of green extraction solvents while fully automating procedures for the analysis of plant materials.

Use of 2-Hydrazinobenzothiazole-Modified Copolymer(s) as Potential Chelating Agent for Sensitive and Selective Determination of Low Levels of Mercury in Seafood by Ultrasound-Assisted Cloud-Point Extraction Combined with Spectrophotometry

In this study, a new method was developed for the pre-concentration of trace mercury from seafood samples prior to analysis by spectrophotometry. The method is based on the complexation between 2-hydrazinobenzothiazole (2-HBT)-modified copolymer(s) and Hg(II) in the presence of an ionic surfactant, cetyltrimethylammonium bromide (CTAB), as sensitivity enhancer at pH 4.5 and the extraction of the complex into the surfactant-rich phase of polyethylene glycol tert-octylphenyl ether (Triton X-114) as the extractant. The variables affecting extraction efficiency were evaluated and optimized. Due to the observation that the modified copolymers are 2.5-fold more sensitive and selective to the Hg²⁺ ions than the CH₃Hg⁺, the amounts of free Hg²⁺ and total Hg were determined at 325 nm by spectrophotometric detection of free Hg²⁺ and total Hg in the pre-treated and extracted fish samples using dilute acid mixture containing Triton X-114 and K₂Cr₂O₇, before and after oxidation of CH₃Hg⁺ to Hg²⁺ with mixture of KBr and KBrO₃ in the acidic media. The amount of CH₃Hg⁺ was calculated from the difference between total Hg and free Hg²⁺ amounts. The accuracy was tested by analysis of two certified samples. The results were statistically in good agreement with the certified values, and the precision was lower than 6.4%. The limits of detection were 1.40 (1.58) and 1.91 (2.11) μg L^-1 for Hg²⁺ from the two calibration solutions spiked before the pre-treatment, respectively. It has been observed that there is no significant matrix effect by comparison of slopes of the calibration curves. The method was applied to seafood samples for speciation analysis of free Hg²⁺ and CH₃Hg⁺. In terms of speciation, while total Hg is detected in the range of 12.6-143.8 μg kg^-1, the distribution of mercury in seafood was in the range of 7.4-53.3 μg kg^-1 for CH₃Hg⁺ and in 8.3-90.5 μg kg^-1 for free Hg²⁺.

Utility of ultrasound assisted-cloud point extraction and spectophotometry as a preconcentration and determination tool for the sensitive quantification of mercury species in fish samples

The current study reports, for the first time, the development of a new analytical method employing ultrasound assisted-cloud point extraction (UA-CPE) for the extraction of CH₃Hg⁺ and Hg²⁺ species from fish samples. Detection and quantification of mercury species were performed at 550nm by spectrophotometry. The analytical variables affecting complex formation and extraction efficiency were extensively evaluated and optimized by univariate method. Due to behave 14-fold more sensitive and selective of thiophene 2,5-dicarboxylic acid (H₂TDC) to Hg²⁺ ions than CH₃Hg⁺ in presence of mixed surfactant, Tween 20 and SDS at pH5.0, the amounts of free Hg²⁺ and total Hg were spectrophotometrically established at 550nm by monitoring Hg²⁺ in the pretreated- and extracted-fish samples in ultrasonic bath to speed up extraction using diluted acid mixture (1:1:1, v/v, 4molL^-1 HNO₃, 4molL^-1 HCl, and 0.5molL^-1 H₂O₂), before and after pre-oxidation with permanganate in acidic media. The amount of CH₃Hg⁺ was calculated from difference between total Hg and Hg²⁺ amounts. The UA-CPE method showed to be suitable for the extraction and determination of mercury species in certified reference materials. The results were in a good agreement (with Student's t-test at 95% confidence limit) with the certified values, and the relative standard deviation was lower than 3.2%. The limits of detection have been 0.27 and 1.20μgL^-1, for Hg²⁺ from aqueous calibration solutions and matrix-matched calibration solutions spiked before digestion, respectively, while it is 2.43μgL^-1 for CH₃Hg⁺ from matrix-matched calibration solutions. A significant matrix effect was not observed from comparison of slopes of both calibration curves, so as to represent the sample matrix. The method was applied to fish samples for speciation analysis of Hg²⁺ and CH₃Hg⁺. In terms of speciation, while total Hg is detected in range of 2.42-32.08μgkg^-1, the distribution of mercury in fish were in range of 0.7-11.06μgkg^-1 for CH₃Hg⁺ and in range of 1.72-24.56μgkg^-1 for Hg²⁺.

Application of a novel electrochemical sensor based on modified siliceous mesocellular foam for electrochemical detection of ultra-trace amounts of mercury ions

S-MCF particles were functionalized with dithizone groups, and applied as a new class of mesoporous electrode material for preconcentration and electrochemical detection of trace mercury ions in environmental samples.

Trace monitoring of silver ions in food and water samples by flame atomic absorption spectrophotometry after preconcentration with solvent-assisted dispersive solid phase extraction

In this research, a new sample treatment technique termed solvent-assisted dispersive solid phase extraction (SADSPE) was developed. The new method was based on the dispersion of the sorbent into the sample to maximize the contact surface. In this approach, the dispersion of the sorbent at a very low milligram level was achieved by injecting a mixture solution of the sorbent and disperser solvent into the aqueous sample. Thereby, a cloudy solution formed. The cloudy solution resulted from the dispersion of the fine particles of the sorbent in the bulk aqueous sample. After extraction, the cloudy solution was centrifuged and the enriched analytes in the sediment phase dissolved in ethanol and determined by FAAS. Under the optimized conditions, the detection limit for silver ions was 0.8 μg L(-1). The relative standard deviations for six separate extraction experiments for determination of 5 and 200 μg L(-1) of silver ions was 3.4 and 3.1 %. The preconcentration factor was found to be 61.7. SADSPE was successfully applied for trace determination of silver ions in water and food samples.

Efficient and selective extraction and determination of ultra trace amounts of Hg2+ using solid phase extraction combined with ion pair based surfactant-assisted dispersive liquid–liquid microextraction

Solid phase extraction coupled with ion pair based surfactant-assisted dispersive liquid–liquid microextraction based on the solidification of the floating organic drop method was applied for determination of Hg²⁺ in different samples.

Synthesis and characterization of diphenylcarbazide-siliceous mesocellular foam and its application as a novel mesoporous sorbent for preconcentration and trace detection of copper and cadmium ions

We are introducing diphenylcarbazide functionalized siliceous mesocellular foam as a novel mesoporous solid-phase for the extraction of heavy metal ions including copper(ii) and cadmium(ii).