SPME-MS-Based Electronic Nose as a Tool for Determination of Authenticity of PDO Cheese, Oscypek

Technological tools for the measurement of sensory characteristics in food: A review

The use of technological tools, in the food industry, has allowed a quick and reliable identification and measurement of the sensory characteristics of food matrices is of great importance, since they emulate the functioning of the five senses (smell, taste, sight, touch, and hearing). Therefore, industry and academia have been conducting research focused on developing and using these instruments which is evidenced in various studies that have been reported in the scientific literature. In this review, several of these technological tools are documented, such as the e-nose, e-tongue, colorimeter, artificial vision systems, and instruments that allow texture measurement (texture analyzer, electromyography, others). These allow us to carry out processes of analysis, review, and evaluation of food to determine essential characteristics such as quality, composition, maturity, authenticity, and origin. The determination of these characteristics allows the standardization of food matrices, achieving the improvement of existing foods and encouraging the development of new products that satisfy the sensory experiences of the consumer, driving growth in the food sector. However, the tools discussed have some limitations such as acquisition cost, calibration and maintenance cost, and in some cases, they are designed to work with a specific food matrix.

Can Volatiles Fingerprints be an Alternative to Isotope Ratio Mass Spectrometry in the Botanical Origin Determination of Spirits?

Mass spectrometry based quasi-electronic nose using solid-phase microextraction to introduce volatiles directly to mass spectrometer without chromatographic separation (HS-SPME-MS) was used to discriminate 45 raw spirits produced from C3 (potato, rye, wheat) and C4 (corn, sorghum) plants. The samples were also subjected to isotope ratio mass spectrometry (IRMS), which unequivocally distinguished C3 from C4 samples; however, no clear differentiation was observed for C3 samples. On the contrary, HS-SPME-MS, which uses unresolved volatile compounds "fingerprints" in a form of ions of a given m/z range and various intensities provided excellent sample classification and prediction after OPLS-DA data processing verified also by the artificial neural network (ANN).

Application progress of intelligent flavor sensing system in the production process of fermented foods based on the flavor properties

Fermented foods are sensitive to the production conditions because of microbial and enzymatic activities, which requires intelligent flavor sensing system (IFSS) to monitor and optimize the production process based on the flavor properties. As the simulation system of human olfaction and gustation, IFSS has been widely used in the field of food with the characteristics of nondestructive, pollution-free, and real-time detection. This paper reviews the application of IFSS in the control of fermentation, ripening, and shelf life, and the potential in the identification of quality differences and flavor-producing microbes in fermented foods. The survey found that electronic nose (tongue) is suitable to monitor fermentation process and identify food authenticity in real time based on the changes of flavor profile. Gas chromatography-ion mobility spectrometry and nuclear magnetic resonance technology can be used to analyze the flavor metabolism of fermented foods at various production stages and explore the correlation between flavor substances and microorganisms.

Non-targeted analysis of VOCs by HS-SPME-G C/MS coupled with chemometrics as a potential tool for authentication of White Kołuda oat goose

This study tested the possibility of using non-targeted analysis of volatile organic compounds by headspace solid-phase microextraction-gas chromatography-mass spectrometry coupled with chemometrics as a potential tool for differentiating leg meat of oat- and wheat-fed (ad libitum) White Kołuda geese. Thirty-six classification models were obtained for which the correct classification rate and classification accuracy for oatfed and wheat-fed geese were calculated based on a seven-fold cross-validation. Generally, the most advantageous method of the sample preparation was the high-temperature heat treatment version, whereas the highest correct classification rate was obtained when the chemometric analysis was carried out on the female, then male, and finally male + female variant of group comparisons (P<0.01). Furthermore, log-transformation appeared to be a slightly better data preprocessing technique in comparison to systematic ratio normalization. The obtained classification models can potentially differentiate the meat of oat-fattened from wheat-fattened White Kołuda geese.

Assessing food authenticity through protein and metabolic markers

This chapter aims to address an issue of ancient origins, but more and more topical in a globalized world in which consumers and stakeholders are increasingly aware: the authenticity of food. Foods are systems that can also be very complex, and verifying the correspondence between what is declared and the actual characteristics of the product is often a challenging issue. The complexity of the question we want to answer (is the food authentic?) means that the answer is equally articulated and makes use of many different analytical techniques. This chapter will consider the chemical analyses of foods aimed at guaranteeing their authenticity and will focus on frontier methods that have been developed in recent years to address the need to respond to ever-increasing guarantees of authenticity. Targeted and non-targeted approaches will be considered for verifying the authenticity of foods, through the study of different classes of constituents (proteins, metabolites, lipids, flavors). The numerous approaches available (proteomics, metabolomics, lipidomics) and the related analytical techniques (LC-MS, GC-MS, NMR) are first described from a more general point of view, after which their specific application for the purposes of authentication of food is addressed.

Electronic nose for detection of food adulteration: a review

The food products may attract unscrupulous vendors to dilute it with inexpensive alternative food sources to achieve more profit. The risk of high value food adulteration with cheaper substitutes has reached an alarming stage in recent years. Commonly available detection methods for food adulteration are costly, time consuming and requires high degree of technical expertise. However, a rapid and suitable detection method for possible adulterant is being evolved to tackle the aforesaid issues. In recent years, electronic nose (e-nose) system is being evolved for falsification detection of food products with reliable and rapid way. E-nose has the ability to artificially perceive aroma and distinguish them. The use of chemometric analysis together with gas sensor arrays have shown to be a significant procedure for quality monitoring in food. E-nose techniques with numerous provisions are reliable and favourable for food industry in food fraud detection. In the present review, the contributions of gas sensor based e-nose system are discussed extensively with a view to ascertain the adulteration of food products.

Comparison of Cheese Aroma Intensity Measured Using an Electronic Nose (E-Nose) Non-Destructively with the Aroma Intensity Scores of a Sensory Evaluation: A Pilot Study

Cheese aroma is known to affect consumer preference. One of the methods to measure cheese aroma is the use of an electronic nose (e-nose), which has been used to classify cheese types, production areas, and cheese ages. However, few studies have directly compared the aroma intensity scores derived from sensory evaluations with the values of metal oxide semiconductor sensors that can easily measure the aroma intensity. This pilot study aimed to investigate the relationship between sensory evaluation scores and e-nose values with respect to cheese aroma. Five types of processed cheese (two types of normal processed cheese, one type containing aged cheese, and two types containing blue cheese), and one type of natural cheese were used as samples. The sensor values obtained using the electronic nose, which measured sample aroma non-destructively, and five sensory evaluation scores related to aroma (aroma intensity before intake, during mastication, and after swallowing; taste intensity during mastication; and remaining flavor after swallowing (lasting flavor)) determined by six panelists, were compared. The e-nose values of many of the tested cheese types were significantly different, whereas the sensory scores of the one or two types of processed cheese containing blue cheese and those of the natural cheese were significantly different. Significant correlations were observed between the means of e-nose values and the medians of aroma intensity scores derived from the sensory evaluation testing before intake, during mastication, and after swallowing. In particular, the aroma intensity score during mastication was found to have a linear relationship with the e-nose values (Pearson’s R = 0.983). In conclusion, the e-nose values correlated with the sensory scores with respect to cheese aroma intensity and could be helpful in predicting them.

The Effect of Catabolic Transformations of Proteins and Fats on the Quality and Nutritional Value of Raw Ripened Products from Zlotnicka Spotted and Zlotnicka White Meat

The aim of the study was to compare the advancement of the ripening as well as catabolic changes in proteins and fats of Zlotnicka Spotted (ZS) and Zlotnicka White (ZW) meat and their impact on the quality and nutritional value of ready-to-eat products. The meat of the breeds ZS and ZW differed not only in the basic chemical composition but also in the susceptibility to catabolic transformations of proteins and lipids, which translated into a separate technological and nutritional quality as well as the profile of volatile odor compounds. Loins due to their compact histological structure, low pH (5.4) and decreased water activity (0.92–0.93) were characterized by a lower number of coagulase-negative cocci (3.3 log cfu/g) compared to hams. The products of both breeds differed in the content of selected neutral glucogenic amino acids with a pI in the range of 5.6–6.1 mainly. The content of biogenic amines was therefore completely dependent on the metabolic potential of acidifying bacteria. Larger number of lactic acid bacilli (7.5–7.7 log cfu/g) and lactic acid cocci (7.9–8.3 log cfu/g), as well as a higher content of saturated (55.2–53.7%) and polyunsaturated fatty acids (6.4–7.0%) shaped the final pH of hams (5.3). Presence of aldehydes, ketones and alcohols indicated existing fat oxidation despite the small values of the TBA index of hams (1.1 mg/kg) and loins (0.4–0.6 mg/kg). The volatile compounds that differentiated products of ZS and ZW formed by the oxidation and microbial activity, were, primarily: octanal, 1-hydroxypropan- 2-one, 3-methylpentan-2-one, propane-1,2-diol, 2,5-dimethylfuran and 3-hydroxybutan- 2-one, butane-2,3-dione, butane-1,2-diol, respectively.

Tea quality evaluation by applying E-nose combined with chemometrics methods

Tea is one of the most popular beverage with distinct flavor consumed worldwide. It is of significance to establish evaluation method for tea quality controlling. In this work, electronic nose (E-nose) was applied to assess tea quality grades by detecting the volatile components of tea leaves and tea infusion samples. The "35th s value", "70th s value" and "average differential value" were extracted as features from E-nose responding signals. Three data reduction methods including principle component analysis (PCA), multi-dimensional scaling (MDS) and linear discriminant analysis (LDA) were introduced to improve the efficiency of E-nose analysis. Logistic regression (LR) and support vector machine (SVM) were applied to set up qualitative classification models. The results indicated that LDA outperformed original data, PCA and MDS in both LR and SVM models. SVM had an advantage over LR in developing classification models. The classification accuracy of SVM based on the data processed by LDA for tea infusion samples was 100%. Quantitative analysis was conducted to predict the contents of volatile compounds in tea samples based on E-nose signals. The prediction results of SVM based on the data processed by LDA for linalool (training set: R2 = 0.9523; testing set: R2 = 0.9343), nonanal (training set: R2 = 0.9617; testing set: R2 = 0.8980) and geraniol (training set: R2 = 0.9576; testing set: R2 = 0.9315) were satisfactory. The research manifested the feasibility of E-nose for qualitatively and quantitatively analyzing tea quality grades.

Composition of Volatile Compounds in Heat-Treated Meat from Polish Native Sheep Breeds Using HS-SPME-GC/MS – Chemometric Classification Based on Breed and Age

In order to characterize the volatile compounds composition of lamb meat, 3 groups of baked leg muscle samples from two Polish native sheep breeds: Świniarka aged 9 months (S9), Wrzosówka aged 9 months (W9), and Wrzosówka aged 7 months (W7), were analyzed by HS-SPME-GC/MS, followed by multivariate statistics comprising the F-ratio method for variables pre-selection, and PCA-LDA analysis. Ninety seven volatile compounds were determined, out of which 74 were identified. The largest classes of volatile compounds were aldehydes and furans followed by alcohols, hydrocarbons, ketones, and sulfur and nitrogen compounds. Statistically significant differences between the S9, W9, and W7 groups were observed for 11 volatiles, i.e.: pentanal; hexanal; 1,3-octadiene; benzaldehyde; 3-ethyl-2-methyl-1,3-hexadiene; 3-octen-2-one; 2-octenal; 2-hexylfuran; tetradecanal; pentadecanal; hexadecanal. The HS-SPME-GC/MS method coupled with chemometrics, based on the relative intensity spectral data of these volatiles, proved to be an effective tool for the discrimination of lambs according to breed and age. The classification accuracy value for the S9, W9, and W7 groups was 100%.

HS-SPME-MS-Enose Coupled with Chemometrics as an Analytical Decision Maker to Predict In-Cup Coffee Sensory Quality in Routine Controls: Possibilities and Limits

The quality assessment of the green coffee that you will go to buy cannot be disregarded from a sensory evaluation, although this practice is time consuming and requires a trained professional panel. This study aims to investigate both the potential and the limits of the direct headspace solid phase microextraction, mass spectrometry electronic nose technique (HS-SPME-MS or MS-EN) combined with chemometrics for use as an objective, diagnostic and high-throughput technique to be used as an analytical decision maker to predict the in-cup coffee sensory quality of incoming raw beans. The challenge of this study lies in the ability of the analytical approach to predict the sensory qualities of very different coffee types, as is usual in industry for the qualification and selection of incoming coffees. Coffees have been analysed using HS-SPME-MS and sensory analyses. The mass spectral fingerprints (MS-EN data) obtained were elaborated using: (i) unsupervised principal component analysis (PCA); (ii) supervised partial least square discriminant analysis (PLS-DA) to select the ions that are most related to the sensory notes investigated; and (iii) cross-validated partial least square regression (PLS), to predict the sensory attribute in new samples. The regression models were built with a training set of 150 coffee samples and an external test set of 34. The most reliable results were obtained with acid, bitter, spicy and aromatic intensity attributes. The mean error in the sensory-score predictions on the test set with the available data always fell within a limit of ±2. The results show that the combination of HS-SPME-MS fingerprints and chemometrics is an effective approach that can be used as a Total Analysis System (TAS) for the high-throughput definition of in-cup coffee sensory quality. Limitations in the method are found in the compromises that are accepted when applying a screening method, as opposed to human evaluation, in the sensory assessment of incoming raw material. The cost-benefit relationship of this and other screening instrumental approaches must be considered and weighed against the advantages of the potency of human response which could thus be better exploited in modulating blends for sensory experiences outside routine.

Alternative data mining/machine learning methods for the analytical evaluation of food quality and authenticity - A review

In recent years, the variety and volume of data acquired by modern analytical instruments in order to conduct a better authentication of food has dramatically increased. Several pattern recognition tools have been developed to deal with the large volume and complexity of available trial data. The most widely used methods are principal component analysis (PCA), partial least squares-discriminant analysis (PLS-DA), soft independent modelling by class analogy (SIMCA), k-nearest neighbours (kNN), parallel factor analysis (PARAFAC), and multivariate curve resolution-alternating least squares (MCR-ALS). Nevertheless, there are alternative data treatment methods, such as support vector machine (SVM), classification and regression tree (CART) and random forest (RF), that show a great potential and more advantages compared to conventional ones. In this paper, we explain the background of these methods and review and discuss the reported studies in which these three methods have been applied in the area of food quality and authenticity. In addition, we clarify the technical terminology used in this particular area of research.

Implementation of chemometrics in quality evaluation of food and beverages

Conventional methods for food quality evaluation based on chemical or microbiological analysis followed by traditional univariate statistics such as ANOVA are considered insufficient for some purposes. More sophisticated instrumental methods including spectroscopy and chromatography, in combination with multivariate analysis-chemometrics, can be used to determine food authenticity, identify adulterations or mislabeling and determine food safety. The purpose of this review is to present the current state of knowledge on the use of chemometric tools for evaluating quality of food products of animal and plant origin and beverages. The article describes applications of several multivariate techniques in food and beverages research, showing their role in adulteration detection, authentication, quality control, differentiation of samples and comparing their classification and prediction ability.

A Novel MOS Nanowire Gas Sensor Device (S3) and GC-MS-Based Approach for the Characterization of Grated Parmigiano Reggiano Cheese

To determine the originality of a typical Italian Parmigiano Reggiano cheese, it is crucial to define and characterize its quality, ripening period, and geographical origin. Different analytical techniques have been applied aimed at studying the organoleptic and characteristic volatile organic compounds (VOCs) profile of this cheese. However, most of the classical methods are time consuming and costly. The aim of this work was to illustrate a new simple, portable, fast, reliable, non-destructive, and economic sensor device S3 based on an array of six metal oxide semiconductor nanowire gas sensors to assess and discriminate the quality ranking of grated Parmigiano Reggiano cheese samples and to identify the VOC biomarkers using a headspace SPME-GC-MS. The device could clearly differentiate cheese samples varying in quality and ripening time when the results were analyzed by multivariate statistical analysis involving principal component analysis (PCA). Similarly, the volatile constituents of Parmigiano Reggiano identified were consistent with the compounds intimated in the literature. The obtained results show the applicability of an S3 device combined with SPME-GC-MS and sensory evaluation for a fast and high-sensitivity analysis of VOCs in Parmigiano Reggiano cheese and for the quality control of this class of cheese.