Sensitive Determination of Bromate in Water Samples by Capillary Electrophoresis Coupled with Electromembrane Extraction

Capillary and microchip electrophoresis with contactless conductivity detection for analysis of foodstuffs and beverages

The paper provides a comprehensive survey of the use of capillary and microchip electrophoresis in combination with contactless conductivity detection (C⁴D) for the analysis of drinking water, beverages and foodstuffs. The introduction sets forth the fundamentals of conductivity detection anddescribes an axialC⁴Dversion. There is also a detailed discussion of the determination of inorganic ions, organic acids, fatty acids, amino acids, amines, carbohydrates, foreign substances and poisons from the standpoint of separation conditions, sample treatment and detection limits. Special attention is paid to the analysis of foodstuffs at microchips with emphasis on the employed material and connection of the microchip with the C⁴D. The review attempts to draw attention to modern trends, such as dual-opposite injection, field-enhanced sample injection, electromembrane extraction and on-line combination of microdialysis with CE. CE/C⁴D is characterised by high universality, high speed of analysis, simple sample preparation, small consumption of sample and other chemicals.

Application of Capillary Electrophoresis for Determination of Inorganic Analytes in Waters

Aside from HPLC and GC, capillary electrophoresis (CE) is one of the most important techniques for high-performance separations in modern analytical chemistry. Its main advantages are the possibility of using different detection techniques, the possibility of in-capillary sample processing for preconcentration or derivatization, and ease of instrumental miniaturization down to the microfluidic scale. Those features are utilized in the separation of macromolecules in biochemistry and in genetic investigations, but they can be also used in determinations of inorganic ions in water analysis. This review, based on about 100 original research works, presents applications of CE methods in water analysis reported in recent decade, mostly regarding conductivity detection or indirect UV detection. The developed applications include analysis of high salinity sea waters, as well as analysis of other surface waters and drinking waters.

Double surfactants-assisted electromembrane extraction of cyromazine and melamine in surface water, soil and cucumber samples followed by capillary electrophoresis with contactless conductivity detection

BACKGROUND

Cyromazine (CYR) and its main degradation product melamine (MEL) are attracting wide attention due to their potential hazards to the environment and humans. In this work, double surfactants-assisted electromembrane extraction (DS-EME) by Tween 20 and alkylated phosphate was firstly used for purification and extraction of CYR and MEL, and the extract was directly analyzed by capillary electrophoresis with capacitively coupled contactless conductivity detection.

RESULTS

Under the optimum conditions, two targets could be well separated from the main interferences, including common biogenic amines and inorganic cations within 14 min. This developed method was successfully applied to the analyses of surface water, soil and cucumber samples, and the average recoveries were in the range 93.3-112%. DS-EME provided a synergistic purification and enrichment effect for CYR and MEL by adding Tween 20 and alkylated phosphate into donor phase and supporting liquid membrane, respectively. Satisfactory limits of detection [0.2-1.5 ng mL^-1 , signal-to-noise ratio (S/N) = 3] could be obtained in the tested sample matrices, and the corresponding enrichment factors were up to 115∼123 times.

CONCLUSION

This developed method provides an alternative for the simultaneous analysis of CYR and MEL in complex real-world samples. © 2019 Society of Chemical Industry.