Dilute-and-Shoot Liquid Chromatography Approach for Simple and High-throughput Analysis of 5-Hydroxymethylfurfural in Fruit-based Baby Foods

Determination of 5-Hydroxymethylfurfural (5-HMF) in milk products by surface-enhanced Raman spectroscopy and its simulation analysis

5-Hydroxymethylfurfural (5-HMF) is a useful indicator of thermal damage degree and freshness of milk. It is of great importance to develop simple, rapid and accurate analytical methods for the sensitive detection of 5-HMF in milk and milk-based products. In this work, surface-enhance Raman spectroscopy (SERS) was used for rapid determination of 5-HMF in processed cheese by colloidal Au nanoparticles (AuNPs) substrate synthesized by the classical solvothermal reduction method. Density functional theory (DFT) calculations were carried out to determine the vibration assignments of 5-HMF and the surface enhancement effect of AuNPs substrate. The results found that a good linear response on the AuNPs substrate for 5-HMF in the concentration range of 0.1-75 mM was established with the detection limit of 75 μM (S/N = 3). Furthermore, the present method could be applied to the determination of 5-HMF in a cheese real sample which revealed its promising application in food safety and analysis.

Determination of Fosetyl-Aluminum in Wheat Flour with Extract-Dilute-Shoot Procedure and Hydrophilic Interaction Liquid Chromatography Tandem Mass Spectrometry

Fosetyl-aluminum is a widely used ionic fungicide. This pesticide is not amenable to the common multi-residue sample preparation methods. Herein, this paper describes a novel method for the simple and sensitive determination of fosetyl-aluminum residue in wheat flour. The sample preparation method involved extraction with water under ultrasonication and subsequent dilution with six-fold acetonitrile. The fosetyl-aluminum concentration was determined by hydrophilic interaction liquid chromatography tandem mass spectrometry. The limit of detection and quantification were only 5 and 10 ng/g, respectively, which meet the requirement of the current European legislation. Matrix-matched linearity (r2 = 0.9999) was established in the range of 10–2000 ng/g. Satisfactory recoveries were achieved in the range of 95.6% to 105.2% for three levels of spiked samples (10, 50, and 100 ng/g). Finally, the method was applied to analyzing 75 wheat flour samples produced in four provinces in China. Two samples were positive with concentrations over the limit of detection. This is the first method focusing on fosetyl-aluminum determination in wheat flour with an extract-dilute-shoot strategy and is very promising for the routine quality control of fosetyl-aluminum in similar cereal matrices.

Simple and Fast Determination of Terbinafine in Human Urine by Dilute and Shoot HPLC-DAD Using a Core-Shell Column

BACKGROUND

Terbinafine is an allylamine antifungal that is effective against many fungi, dermatophytes and moulds. Analytical methods are required for the determination of terbinafine in biological fluids to perform therapeutic drug monitoring and pharmacokinetic studies.

OBJECTIVE

The aim of this study was to develop and validate a novel and fast method combining dilute and shoot approach and high-performance liquid chromatography coupled with photodiode array detection for the determination of terbinafine in human urine.

METHODS

Chromatographic parameters including mobile phase composition, pH, flow rate and injection volume were assessed and optimized. The separation of terbinafine and naproxen (internal standard) was achieved within 3 min using a C18 core-shell column (Raptor ARC-18, 100 x 4.6 mm, 2.7 μm) under isocratic conditions. Samples were eluted from the column at the flow rate of 1.4 mL/min using a mobile phase containing 0.2% triethylamine in water (pH 3.4 with formic acid): acetonitrile (45:55, v/v).

RESULTS

The presented technique was linear in the range of 25-2000 ng/mL. Intra- and inter-day reproducibility at four quality control levels (25, 200, 750 and 1500 ng/mL) were less than 7%, with relative errors ranging from -5.40% to 5.91%. The limit of detection was 12.60 ng/mL. The developed method has three main advantages compared to existing methods: simplicity and greenness of sample preparation, use of core-shell column and short analysis time.

CONCLUSION

The results of this study indicate that the combination of dilute and shoot approach and core-shell column can be regarded as an advantageous application for the fast determination of terbinafine in the urine.