Capillary Zone Electrophoresis Determination of Five Trace Food Additives in Beverage Samples Using Counterflow Transient Isotachophoresis

Rapid ion pair-based surfactant-assisted liquid-liquid microextraction with solidification of floating organic drop for simultaneous spectrophotometric determination of selected anionic dyes in food samples

Ion pair-based surfactant-assisted liquid-liquid microextraction with solidification of floating organic drops has been developed to extract Allura red (AR), tartrazine (TAR), and fast green (FG) prior to spectrophotometric determination. Cetyltrimethylammonium bromide (CTAB) was employed as ion-pairing agent to enhance the hydrophobic behavior of anionic dyes. 1-undecanol and ethanol were used as the extraction and dispersion solvents, respectively. The dyes were quantitatively extracted in the presence of KCl (0.15 mol L-1) at pH 4.0. The method exhibits wide linearity (15.0-1500.0 μg L-1 for AR, 35.0-2000.0 μg L-1 for TAR, and 3.0-1200.0 μg L-1 for FG) with preconcentration factors of 19.6, 20.1, and 19.9, respectively. The detection limit was 3.7. 9.5, and 0.83 μg L-1 for AR, TAR, and FG, respectively. The relative standard deviation did not exceed 2.1 %. The procedure was applied for the determination of these dyes in food samples.

Pt nanoparticles/laser-engraved graphene-based integrated electrochemical platform for point-of-use determination of ponceau 4R, amaranth and tartrazine in food

This study presents the first integrated electrochemical platform (IEP) with point-of-use and portable features for on-site determination of ponceau 4R (RP), amaranth (AM), and tartrazine (TZ) in food by integrating a mass-producible Pt nanoparticles/laser-engraved graphene (Pt NPs/LEG)-based sensing chip and a reusable electrochemical miniaturized workstation. The sensing chip utilizes Pt NPs/LEG with unique architectures as electrode material and exhibits desirable analytical performance towards RP, AM, or TZ with satisfied linear range (0.25-50 μM for RP, AM, and TZ), high sensitivity (7.29 μA μM-1 cm-2, 7.18 μA μM-1 cm-2, and 2.02 μA μM-1 cm-2 for RP, AM, and TZ, respectively) and low limit of detection (50 nM, 58 nM, and 204 nM for RP, AM, and TZ, respectively). The sensing chip shows excellent selectivity, high stability, outstanding reproducibility, and acceptable mechanical stability. IEP can be implemented to test RP, AM, or TZ in real samples with satisfactory accuracy and recoveries.

Capillary electromigration methods for food analysis and Foodomics: Advances and applications in the period March 2021 to March 2023

This work presents a revision of the main applications of capillary electromigration (CE) methods in food analysis and Foodomics. Papers that were published during the period March 2021 to March 2023 are included. The work shows the multiple CE methods that have been developed and applied to analyze different types of molecules in foods and beverages. Namely, CE methods have been applied to analyze amino acids, biogenic amines, heterocyclic amines, peptides, proteins, phenols, polyphenols, pigments, lipids, carbohydrates, vitamins, DNAs, contaminants, toxins, pesticides, additives, residues, small organic and inorganic compounds, and other minor compounds. In addition, new CE procedures to perform chiral separation and for evaluating the effects of food processing as well as the last developments of microchip CE and new applications in Foodomics will be also discussed. The new procedures of CE to investigate food quality and safety, nutritional value, storage, and bioactivity are also included in the present review work.

Simultaneous determination of benzoic acid and sorbic acid in non-alcoholic beverages by a validated HS-GC-MS method with reduced waste

A headspace gas chromatography-mass spectrometry (HS-GC-MS) method is presented for the simultaneous determination of benzoic acid (BA) and sorbic acid (SoA) in different types of non-alcoholic beverages. Sensitive and reliable results were achieved together with minimising consumption of reagents and samples. Salicylic acid (SalA) was used as internal standard (IS). It was necessary to derivatise BA, SoA and SalA to their methyl esters for HS-GC-MS measurement and extensive optimisation studies for in-vial derivatisation were carried out on the temperature, incubation time, injection time of the loopless HS, as well as on the concentration of sulphuric acid used as a catalyst. Validation studies carried out under optimum conditions after mixing 50 µL of sample and IS solutions with 200 µL of 4.5 M sulphuric acid in 22 mL HS vials revealed that the developed method was both very precise (relative standard deviation < 5%) and accurate (average recovery%: 101.0% for BA and 100.4% for SoA). The validated method was applied to a wide range of beverage types and the results compared with the relevant regulation and product label declarations.

Electrochemical platform based on molecularly imprinted polymer with zinc oxide nanoparticles and multiwalled carbon nanotubes modified screen-printed carbon electrode for amaranth determination

A novel electrochemical platform for amaranth determination has been developed using a rapid, easy, inexpensive, and portable molecularly imprinted polymer technique. The MIP platform was fabricated by electropolymerizing melamine as monomer in the presence of amaranth as template on the surface of ZnO-MWCNT/SPCE. Then, amaranth was completely eluted, leaving imprinted cavities in the polymeric film that could effectively recognize amaranth in solution. The electrochemical platform based on a molecularly imprinted polymelamine was analyzed by scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). Under optimum conditions, the developed MIP/ZnO-MWCNT/SPCE platform can be properly used for amaranth determination, with high sensitivity of 96.2 µA µM cm^-2, two linear concentration ranges (0.01 to 1 µM and 1 to 1000 µM) and a low limit of detection of 0.003 µM. The anodic peak potential of amaranth was found to be 0.73 V. Additionally, the polymelamine MIP films specifically recognize amaranth molecules, making it possible to detect amaranth in a complex solution with high selectivity, excellent repeatability, reproducibility, and stability. The MIP/ZnO-MWCNT modified screen-printed carbon electrode was successfully applied to determine amaranth in pharmaceutical and water samples, with recovery values ranging from 99.7 to 102% and RSD% values less than 3.2%.

One-pot synthesis of a novel conductive molecularly imprinted gel as the recognition element and signal amplifier for the selective electrochemical detection of amaranth in foods

Herein, we prepared a self-crosslinked conductive molecularly imprinted gel (CMIG) using cationic guar gum (CGG), chitosan (CS), β-cyclodextrin (β-CD), amaranth (AM) and multi-walled carbon nanotubes (MWCNTs) by a simple one-pot low temperature magnetic stirring method. The imine bonds, hydrogen-bonding interactions and electrostatic attractions between CGG, CS and AM facilitated CMIG gelation, while β-CD and MWCNTs enhanced the adsorption capacity and conductivity of CMIG, respectively. Next, the CMIG was deposited onto the surface of a glassy carbon electrode (GCE). After selective removal of AM, a highly sensitive and selective CMIG-based electrochemical sensor was obtained for AM determination in foods. The CMIG allowed specific recognition of AM and could also be used for signal amplification, thus improving the sensitivity and selectivity of the sensor. Due to the high viscosity and self-healing properties of the CMIG, the developed sensor was very durable retaining a 92.1% of original current after 60 consecutive measurements. Under optimal conditions, the CMIG/GCE sensor showed a good linear response for AM detection (0.02-150 μM) with a limit of detection of 0.003 μM. AM recovery tests were performed in milk powder and white vinegar samples, yielding satisfactory recoveries (89.00%-111.00%). Furthermore, the levels of AM in two kinds of carbonated drinks were analyzed with the constructed sensor and an ultraviolet spectrophotometry method, with no significant difference found of the two methods. This work demonstrates that CMIG based electrochemical sensing platforms allow the cost-effective detection of AM, with the CMIG technology likely being widely applicable to the detection of other analytes.

Combination of colorimetry, inner filter effect-induced fluorometry and smartphone‑based digital image analysis: A versatile and reliable strategy for multi-mode visualization of food dyes

Herein, a multi-mode visualization platform was initiated for in-situ detection of food dyes (FDs) by combining colorimetry, fluorometry and smartphone‑based digital image analysis, in which water-dispersible quantum dots (QDs) were served as nanoprobes. Colorimetry was achieved by color comparison, while both fluorometry and fluorescence quantification were performed through inner filter effect (IFE)-induced fluorescence quenching, then color information (RGB & gray-scale values) of colorimetry and fluorometry was picked by a smartphone to reconstruct digitized alignments. Since IFE mechanism was concentration-dependent but did not rely on the interaction between fluorophore and quencher, the whole process of fluorescence response could be finished within 10 s, and both color gradients and fluorescence changes showed fine mappings to FDs concentrations in the range of 1.0 × 10^-3∼0.035 mg/mL for brilliant blue, and 1.0 × 10^-4∼0.1 mg/mL for Allura red and sunset yellow. As a proof-of-concept, the in-situ multi-mode visualization of these FDs in real beverages was experimentally proved to be highly feasible and reliable as compared with instrumental techniques like UV-vis/fluorescence spectrometry, along with HPLC. Finally, this strategy was extended to the multi-mode visualization of non-food dyes in three simulated wastewater samples with high credibility by contrast with the true additive amounts of model dyes.

Colorimetry Combined with Inner Filter Effect-Based Fluorometry: A Versatile and Robust Strategy for Multimode Visualization of Food Dyes

Herein, a strategy combining colorimetry and inner filter effect (IFE)-based fluorometry was developed for multimode visualization of food dyes (FDs) using CdTe quantum-dots-doped fluorescent indicator papers as a sample-to-answer device. Colorimetry was straightforwardly achieved by FDs extraction through electrostatic interaction and hydrophobic effect while fluorometry was implemented by IFE-induced fluorescence quenching. RGB/gray-scale values of colorimetry and fluorometry were furtherly picked by a smartphone application and applied to reconstruct color information-based digital image analysis for both direct alignments and linear regression analysis. The apparent color and fluorescence of FDs-bound indicator papers, together with their digitized color information, showed a good mapping to FDs concentrations in the range of 0-0.5 mg/mL for Sunset Yellow, 0-0.2 mg/mL for Allura Red, and 0-0.08 mg/mL for Brilliant Blue. As a proof of concept, the dosages of these FDs in real beverages and simulated dye effluents were deduced and cross-validated by different visualization modes, and finally double-checked by instrumental techniques such as spectrometric methods, high-performance liquid chromatography (HPLC), and mass spectroscopy (MS). The above findings concluded that (i) IFE mechanism is generally applicable to build fluorometric systems and (ii) cross validation of different visualization modes can markedly improve detection accuracy, which may provide references for design and fabrication of novel "lab-on-paper" devices for visualization applications with high reliability.

Recent progress in analytical capillary isotachophoresis (2018 - March 2022)

This review brings a survey of papers on analytical capillary and microchip isotachophoresis published since 2018 until the first quarter of 2022. Theoretical papers extending fundamental knowledge include those on computer simulations that remain an important research tool useful in the design of electrolyte systems. Many papers are focused on instrumental aspects where new media including microfluidic devices and their hyphenation to various detection techniques bring remarkable results. Papers reporting analytical applications demonstrate the potential of contemporary analytical isotachophoresis. Although it is not being used on a mass scale, its special features are attracting continued interest resulting in applications of isotachophoresis both as a stand-alone analytical method and as a part of multidimensional separation techniques.

Filter paper-based colorimetric analysis: An instrument-free strategy for semiquantitative naked-eye detection of food colorants

A filter paper-based colorimetric strategy for instrument-independent visual detection of artificial food colorants (FCs) was developed in this study. Indicator papers were prepared via the one-step polycondensation of silane coupling agents onto glass microfiber filter papers, and colorimetric cards with a fine one-to-one correspondence between their colors and FCs concentrations were straightforward obtained by the extraction of FCs with indicator papers by virtue of electrostatic interaction and hydrophobic effect. Filter papers post-modified via such a simple way were proved to be of improved binding class selectivity and colorimetric sensitivity, allowing for in-situ colorimetric assay of FCs in an unprecedently wide range of applicable pH (1.0-12.0) with high reliability and fine versatility. Finally, the semiquantitative naked-eye determination of FCs (Allura red, brilliant blue and sunset yellow) in real-world drink samples was experimentally confirmed to be feasible by comparison with the findings of UV-vis absorption spectra, HPLC and mass spectra.

Applications of capillary electrophoresis in the fields of environmental, pharmaceutical, clinical and food analysis (2019-2021)

So far, the potential of capillary electrophoresis (CE) in the application fields has been increasingly excavated due to the advantages of simple operation, short analysis time, high-resolution, less sample consumption and low cost. This review examines the implementations and advancements of CE in different application fields (environmental, pharmaceutical, clinical and food analysis) covering the literature from 2019 to 2021. In addition, ultrasmall sample injection volume (nanoliter range) and short optical path lead to relatively low concentration sensitivity of the most frequently used UV-absorption spectrophotometric detection, so the pretreatment technology being developed has been gradually utilized to overcome this problem. Despite the review is focused on the development of CE in the fields of environmental, pharmaceutical, clinical and food analysis, the new sample pretreatment techniques of microextraction and enrichment which fit excellently to CE in recent three years are also described briefly. This article is protected by copyright. All rights reserved.

Rapid Determination of Sunset Yellow in Soft Drinks Using Silicon Nanoparticles Synthesized under Mild Conditions

Sunset yellow (SY) is a synthetic colorant which can cause allergies, diarrhea and other symptoms in sensitive people. When ingested too much, it can accumulate in the body and cause damage to the kidneys and liver. Therefore, the content of SY in food must be strictly controlled. In order to regulate their use and ensure food quality, simple and cost-effective methods need to be developed to identify them. In this experiment, fluorescent silicon nanoparticles (SiNPs) were prepared by a one-step method, which is simple, mild and less time-consuming. The fluorescent SiNPs prepared had good thermal stability, excellent salt resistance and pH stability. SY effectively quenched the fluorescence of SiNPs by fluorescence resonance energy transfer when added to the system as an interfering substance. The method had a good linear relationship in the range of SY concentration of 0.050 - 14.0 μg mL^-1 and the detection limit is 0.023 μg mL^-1. The established sensor was applied to the detection of SY in beverages, and the recovery rate was 93.8 - 102.4%. Based on the excellent selectivity and sensitivity of the method, it could provide a convenient way for the detection of SY in food samples.

Capillary electromigration methods for food analysis and Foodomics: Advances and applications in the period February 2019-February 2021

This work presents a revision of the main applications of capillary electromigration methods in food analysis and Foodomics. Articles that were published during the period February 2019-February 2021 are included. The work shows the multiple CE methods that have been developed and applied to analyze different types of molecules in foods. Namely, CE methods have been applied to analyze amino acids, biogenic amines, carbohydrates, chiral compounds, contaminants, DNAs, food additives, heterocyclic amines, lipids, secondary metabolites, peptides, pesticides, phenols, pigments, polyphenols, proteins, residues, toxins, vitamins, small organic and inorganic compounds, as well as other minor compounds. The last results on the use of CE for monitoring food interactions and food processing, including recent microchips developments and new applications of CE in Foodomics, are discussed too. The new procedures of CE to investigate food quality and safety, nutritional value, storage and bioactivity are also included in the present review work.