Ultra-thin polarization independent broadband terahertz metamaterial absorber

Selective-wavelength perfect infrared absorption in Ag@ZnO conical metamaterial structure

We present a new selective Metamaterial Perfect Absorber (MPA) consisting of zinc oxide embedded silver (Ag@ZnO), designed for applications in infrared stealth technology. The numerical simulation included a wide frequency range from 1 to 1000 THz and shows that the design MPA structure presented two absorption peaks at the desired wavelengths of 1.7 µm and 6.5 µm. The absorptivity of both peaks reached approximately 93.1% and 93.5%. The first peak at 1.7 µm decreases the scattering of IR laser beams from the surface of the MPA structure and also lowers the infrared tracks that could direct laser-guided devices to its specific target. On the other hand, the second peak reduces the surface heat wave. The suggested MPA (Ag@ZnO) structure is activated by a plane wave using a full wave vector and a broad frequency domain solution. In the framework of computer simulation technology (CST) Microwave Studio, uses both Finite-Difference-Time-Domain (FDTD) and Finite-Element-Method (FEM) techniques to predict the optical behavior of the proposed MPA structure. Both peaks achieved a high value of absorptivity due to the simultaneous excitation of the electric and magnetic dipole at resonance wavelength.

Optically transparent and flexible-assembled metasurface rasorber for infrared-microwave camouflage based on a hybrid anapole state

Hybrid anapole state, originating from the destructive interference of more than one basic electromagnetic multipole moments with their toroidal counterparts, enables the simultaneous suppression of multiple leading scattering channels, thereby demonstrates promising applications in perfect absorption and electromagnetic camouflage. However, the formation of hybrid anapoles is challenging because a careful overlap of electromagnetic multipoles with their toroidal counterparts is required. In this study, we propose and experimentally demonstrate a transparent and flexible assembled metasurface rasorber supporting hybrid anapole states for infrared and microwave camouflage, which not only supports low IR emissivity in the range of 8-14 μm but also exhibits an absorption-transmission-absorption response in the microwave band. In addition, the conformal and tunable performances of the fabricated metasurface rasorber are experimentally demonstrated. Our study provides a new strategy for designing multispectral camouflage metasurfaces.

Flexible and transparent metadevices for terahertz, microwave, and infrared multispectral stealth based on modularization design

Multispectral stealth technology including terahertz (THz) band will play an increasingly important role in modern military and civil applications. Here, based on the concept of modularization design, two kinds of flexible and transparent metadevices were fabricated for multispectral stealth, covering the visible, infrared (IR), THz, and microwave bands. First, three basic functional blocks for IR, THz, and microwave stealth are designed and fabricated by using flexible and transparent films. And then, via modular assembling, that is, by adding or removing some stealth functional blocks or constituent layers, two multispectral stealth metadevices are readily achieved. Metadevice 1 exhibits THz-microwave dual-band broadband absorption, with average measured absorptivity of 85% in 0.3-1.2 THz and higher than 90% in 9.1-25.1 GHz, suitable for THz-microwave bi-stealth. Metadevice 2 is for IR and microwave bi-stealth, with measured absorptivity higher than 90% in 9.7-27.3 GHz and low emissivity around 0.31 in 8-14 µm. Both metadevices are optically transparent and able to maintain good stealth ability under curved and conformal conditions. Our work offers an alternative approach for designing and fabricating flexible transparent metadevices for multispectral stealth, especially for applications in nonplanar surfaces.

Flexible and transparent broadband microwave metasurface absorber based on multipolar interference engineering

Electromagnetic multipoles enable rich electromagnetic interactions in a metasurface and offer another degree of freedom to control electromagnetic responses. In this work, we design and experimentally demonstrate an optically transparent, flexible and broadband microwave metasurface absorber based on multipolar interference engineering. Different from previous works, the designed metasurface simultaneously supports fundamental electric dipole and high-order electric quadrupole mode, whose interference satisfies the back-scattering suppression condition based on the generalized Kerker effect and thus high absorption. The measurement results indicate that the fabricated metasurface exhibits a high average absorption of 89% in the microwave band from 4 GHz to 18 GHz, together with a good optical transparency. Our study offers an alternative approach for designing broadband microwave metasurface absorber, which is potentially applicable in electromagnetic shielding, radar stealth and energy harvesting.