Significant reduction in toxicity, BOD, and COD of textile dyes and textile industry effluent by a novel bacterium Pseudomonas sp. LBC1

Efficient bioremediation of indigo-dye contaminated textile wastewater using native microorganisms and combined bioaugmentation-biostimulation techniques

In this work, the bioremediation of wastewater from the textile industry with indigo dye content was carried out using combined bioaugmentation, bioventilation, and biostimulation techniques. Initially, the inoculum was prepared by isolating the microorganisms from the textile wastewater in a 2 L bioreactor. Then, the respirometry technique was implemented to determine the affinity of the microorganisms and the substrate by measuring CO2 and allowed the formulation of an empirical mathematical model for the growth kinetics of the microorganism. Finally, the bioremediation was carried out in a 3 L bioreactor obtaining an indigo dye removal efficiency of 20.7 ± 1.2%, 24.0 ± 1.5%, and 29.7 ± 1.1% for equivalent wavelengths of 436 nm, 525 nm, and 620 nm. The chemical oxygen demand showed an average reduction of 88.9 ± 2.5%, going from 470.7 ± 15.6 to 52.3 ± 10.7 ppm after 30 days under constant agitation and aeration. A negative generalized exponential model was fitted to assess the affinity of the microorganism with the wastewater as a substrate by evaluating the production of CO2 during the bioremediation. Bioremediation techniques improve water discharge parameters compared to chemical treatments implemented in the industry, reducing the use of substances that can generate secondary pollution. Bioaugmentation, biostimulation, and bioventing of the textile wastewater in this study demonstrate the potential of these combined techniques to serve as an efficient alternative for indigo-contaminated wastewater in the textile industry.

Structural insights, biocatalytic characteristics, and application prospects of lignin-modifying enzymes for sustainable biotechnology-A review

Lignin modifying enzymes (LMEs) have gained widespread recognition in depolymerization of lignin polymers by oxidative cleavage. LMEs are a robust class of biocatalysts that include lignin peroxidase (LiP), manganese peroxidase (MnP), versatile peroxidase (VP), laccase (LAC), and dye-decolorizing peroxidase (DyP). Members of the LMEs family act on phenolic, non-phenolic substrates and have been widely researched for valorization of lignin, oxidative cleavage of xenobiotics and phenolics. LMEs implementation in the biotechnological and industrial sectors has sparked significant attention, although its potential future applications remain underexploited. To understand the mechanism of LMEs in sustainable pollution mitigation, several studies have been undertaken to assess the feasibility of LMEs in correlating to diverse pollutants for binding and intermolecular interactions at the molecular level. However, further investigation is required to fully comprehend the underlying mechanism. In this review we presented the key structural and functional features of LMEs, including the computational aspects, as well as the advanced applications in biotechnology and industrial research. Furthermore, concluding remarks and a look ahead, the use of LMEs coupled with computational frameworks, built upon artificial intelligence (AI) and machine learning (ML), has been emphasized as a recent milestone in environmental research.

The eco-friendly treatment of rubber industry effluent by using adsorbent derived from Moringa oleifera bark and Pseudomonas sp, cultured from effluent

Rubber processing generates a large volume of wastewater containing rubber latex residues and chemicals. Remediation of the wastewater needs a cost-effective and environment-friendly treatment method. For this study, Moringa oleifera stem bark and Pseudomonas sp. bacteria were used for adsorption and microbial treatment of the effluent. The adsorbent surface was mostly amorphous with crystallinity index 37.9% and the BET surface area was 6.622 m²/g. FTIR analysis indicated involvement of O-H stretching, ketone α, β-unsaturated, C-H stretching, carboxylic acid and derivatives O-C stretching functional groups in the adsorption process. The assessment of the above two agents was based on their reduction capabilities of the toxic parameters, such as total suspended and dissolved solids, total solids, biological and chemical oxygen demand, sulphate, ammonium, dissolved oxygen, phosphate, pH, electrical conductivity, turbidity, and oxidation reduction potential from the wastewater. A comparative study of the present work revealed that both the agents were effective in reduction of most of the above parameters below the safe discharge limits. However, the adsorption using Moringa oleifera stem bark was better compared to the biodegradation by Pseudomonas sp. bacteria. The main challenges that typically accompany biodegradation include microbe handling and a lower removal percentage than adsorption.

Isolation of Bisphenol A-Tolerating/degrading Shewanella haliotis Strain MH137742 from an Estuarine Environment

The human exposure to bisphenol A (BPA) occurs frequently. Once, this compound was one of the highest volume chemicals produced worldwide and used as a plasticizer in many products. However, even at low concentration, it can cause severe damage to the endocrine system because of its endocrine disruptor activity. Thus, mitigation studies to remove or reduce this contaminant from the environment are essential. An alternative method of removing it from the environment is the use of bioremediation processes to the selected bacteria isolated from a BPA-impacted area. In this work, four halotolerant strains were isolated from the Santos Estuary System, one of the most important Brazilian examples of environmental degradation. In the present work, one strain presented strong BPA tolerance and high BPA-degrading activity and could grow in a minimum medium containing BPA as the main carbon source. Strain MH137742 was identified as Shewanella haliotis, based on 16S rRNA gene sequencing and mass spectrometry identification by MALDI-TOF Biotyper. Shewanella haliotis was able to tolerate up to 150 mg L^-1 of BPA and biotransform 75 mg L^-1 in 10 h in a liquid culture medium. Based on the analysis of the produced metabolites by LC-MS, it was possible to predict the metabolic pathway used by this microorganism to degrade the BPA.

Production of Extracellular Laccase from Bacillus subtilis MTCC 2414 Using Agroresidues as a Potential Substrate

Laccases are the model enzymes for multicopper oxidases and participate in several applications such as bioremediation, biopulping, textile, and food industries. Laccase producing bacterium, Bacillus subtilis MTCC 2414, was subjected to optimization by conventional techniques and was partially purified using ammonium salt precipitation method. The agroresidue substrates used for higher yield of laccase were rice bran and wheat bran. Maximum production was achieved at temperature 30°C (270 ± 2.78 U/mL), pH 7.0 (345 ± 3.14 U/mL), and 96 h (267 ± 2.64 U/mL) of incubation. The carbon and nitrogen sources resulted in high enzyme yield at 3% sucrose (275 ± 3.11 U/mL) and 3% peptone (352.2 ± 4.32 U/mL) for rice bran and 3% sucrose (247.4 ± 3.51 U/mL) and 3% peptone (328 ± 3.33 U/mL) for wheat bran, respectively. The molecular weights of partially purified laccase were 52 kDa for rice bran and 55 kDa for wheat bran. The laccase exhibited optimal activity at 70°C (260.3 ± 6.15 U/mL), pH 9.0 (266 ± 4.02 U/mL), and metal ion CuSO4 (141.4 ± 6.64) was found to increase the production. This is the first report that delivers the higher yield of laccase produced from B. subtilis MTCC 2414 using agroresidues as a potential substrate.