Feasibility of Using Light-Induced Fluorescence Spectroscopy for Low-Dose Formulations Monitoring and Control

UV/Vis spectroscopy as an in-line monitoring tool for tablet content uniformity

Continuous manufacturing provides advantages compared to batch manufacturing and is increasingly gaining importance in the pharmaceutical industry. In particular, the implementation of tablet processes in continuous plants is an important part of current research. For this, in-line real-time monitoring of product quality through process analytical technology (PAT) tools is crucial. This study focuses on an in-line UV/Vis spectroscopy method for monitoring the active pharmaceutical ingredient (API) content in tablets. UV/Vis spectroscopy is particularly advantageous here, because it allows univariate data analysis without complex data processing. Experiments were conducted on a rotary tablet press. The tablets consisted of 7- 13 wt% theophylline monohydrate as API, lactose monohydrate and magnesium stearate. Two tablet production rates were investigated, 7200 and 20000 tablets per hour. The UV/Vis probe was mounted at the ejection position and measurements were taken on the tablet sidewall. Validation was according to ICH Q2 with respect to specificity, linearity, precision, accuracy and range. The specificity for this formulation was proven and linearity was sufficient with coefficients of determination of 0.9891 for the low throughput and 0.9936 for the high throughput. Repeatability and intermediate precision were investigated. Both were sufficient, indicated by coefficients of variations with a maximum of 6.46% and 6.34%, respectively. The accuracy was evaluated by mean percent recovery. This showed a higher accuracy at 20000 tablets per hour than 7200 tablets per hour. However, both throughputs demonstrate sufficient accuracy. Finally, UV/Vis spectroscopy is a promising alternative to the common NIR and Raman Spectroscopy.

In-line fluorescence spectroscopy for quantification of low amount of active pharmaceutical ingredient

The pharmaceutical industry is currently implementing new manufacturing principles and modernizing the related processing solutions. A key element in this development is implementation of process analytical technologies (PAT) for measuring product quality in a real-time mode, ideally for a continuously operating processing line. Near-infrared (NIR) spectroscopy is widely used for this purpose, but has limited use for low concentration formulations, due to its inherent detection limit. Light-induced fluorescence (LIF) spectroscopy is a PAT tool that can be used to quantify low concentrations of active pharmaceutical ingredient, and recent development of instrumentation has made it available for in-line applications. In this study, the content of tryptophan in a dynamic powder flow could be measured as low as 0.10 w/w % with LIF spectroscopy with good accuracy of RMSEP = 0.008 w/w %. Both partial least squares regression and support vector machines (SVM) were investigated, but we found SVM to be the better option due to non-linearities between the calibration test and the in-line measurements. With the use of SVM, LIF spectroscopy is a promising candidate for low concentration applications where NIR is not suitable.