Production of long-chain isomaltooligosaccharides from maltotriose using the thermostable amylomaltase and transglucosidase enzymes

Structural characterization of potato starch modified by a 4,6-α-glucanotransferase B from Lactobacillus reuteri E81

The recent reports have revealed that increase in amount of α-1,6 linkages by modification of potato starch with enzyme (glycosyltransferases) treatment gains slowly digestible properties to the starch; however, the formation of new α-1,6-glycosidic linkages diminish the thermal resistance of the starch granules. In this study, a putative GtfB-E81, (a 4,6-α-glucanotransferase-4,6-αGT) from L. reuteri E81 was firstly used to produce a short length of α-1,6 linkages. NMR results revealed that external short chains mostly comprised of 1-6 glucosyl units were newly produced in potato starch, and the α-1,6 linkage ratio was significantly increased from 2.9 % to 36.8 %, suggesting that this novel GtfB-E81 might have potentially an efficient transferase activity. In our study, native and GtfB-E81 modified starches showed fundamental similarities with respect to their molecular properties and treatment of native potato starch with GtfB-E81 did not remarkably change thermal stability of the potato starch, which seems to be very prominent for the food industry given the significantly decreased thermal stability results obtained for the enzyme modified starches reported in the literature. Therefore, the results of this study should open up emerging perspectives for regulating slowly digestible characteristics of potato starch in future studies without a significant change in the molecular, thermal, and crystallographic properties.

Slow digestion properties of long-sized isomaltooligosaccharides synthesized by a transglucosidase from Thermoanaerobacter thermocopriae

Isomaltooligosaccharides (IMOs) are widely used as prebiotic ingredients that promote colon health; however, recent studies revealed that these are slowly hydrolyzed to glucose within the small intestine. Here, novel α-glucans with a higher number of α-1,6 linkages were synthesized from maltodextrins using the Thermoanaerobacter thermocopriae-derived transglucosidase (TtTG) to decrease susceptibility to hydrolysis and improve slow digestion properties. The synthesized long-sized IMOs (l-IMOs; 70.1% of α-1,6 linkages), comprising 10-12 glucosyl units, exhibited slow hydrolysis to glucose when compared to commercial IMOs under treatment with mammalian α-glucosidase level. In male mice, the ingestion of l-IMOs significantly decreased the post-prandial glycemic response compared to other samples (p < 0.05). Therefore, enzymatically synthesized l-IMOs can be applied as functional ingredients for the modulation of blood glucose homeostasis in obesity, Type 2 diabetes, and other chronic diseases.

Heterologous Expression of Thermotolerant α-Glucosidase in Bacillus subtilis 168 and Improving Its Thermal Stability by Constructing Cyclized Proteins

α-glucosidase is an essential enzyme for the production of isomaltooligosaccharides (IMOs). Allowing α-glucosidase to operate at higher temperatures (above 60 °C) has many advantages, including reducing the viscosity of the reaction solution, enhancing the catalytic reaction rate, and achieving continuous production of IMOs. In the present study, the thermal stability of α-glucosidase was significantly improved by constructing cyclized proteins. We screened a thermotolerant α-glucosidase (AGL) with high transglycosylation activity from Thermoanaerobacter ethanolicus JW200 and heterologously expressed it in Bacillus subtilis 168. After forming the cyclized α-glucosidase by different isopeptide bonds (SpyTag/SpyCatcher, SnoopTag/SnoopCatcher, SdyTag/SdyCatcher, RIAD/RIDD), we determined the enzymatic properties of cyclized AGL. The optimal temperature of all cyclized AGL was increased by 5 °C, and their thermal stability was generally improved, with SpyTag-AGL-SpyCatcher having a 1.74-fold increase compared to the wild-type. The results of molecular dynamics simulations showed that the RMSF values of cyclized AGL decreased, indicating that the rigidity of the cyclized protein increased. This study provides an efficient method for improving the thermal stability of α-glucosidase.

The challenges in production technology, health-associated functions, physico-chemical properties and food applications of isomaltooligosaccharides

Isomaltooligosaccharides (IMOs) are recognized as functional food ingredients with prebiotic potential that deliver health benefits. IMOs have attained commercial interest as they are produced from low-cost agricultural products that are widely available and have prospective applications in the food industry. The review examines the various production processes and the main challenges involved in deriving diverse structures of IMO with maximized yield and increased functionality. The different characterization and purification techniques employed for structural elucidation, the physico-chemical importance, technological properties, food-based applications and biological effects (in vitro and in vivo interventions) have been discussed in detail. The key finding is the need for research involving biotechnological and enzymology aspects to simplify the production technologies that meet the industrial and consumer requirements. The knowledge from this article delivers a clear insight to scientists, food technologists and the general public for the improved utilization of IMOs to support the emerging market for functional foods and nutraceuticals.

Heterologous Expression of a Thermostable α-Glucosidase from Geobacillus sp. Strain HTA-462 by Escherichia coli and Its Potential Application for Isomaltose⁻Oligosaccharide Synthesis

Isomaltose-oligosaccharides (IMOs), as food ingredients with prebiotic functionality, can be prepared via enzymatic synthesis using α-glucosidase. In the present study, the α-glucosidase (GSJ) from Geobacillus sp. strain HTA-462 was cloned and expressed in Escherichia coli BL21 (DE3). Recombinant GSJ was purified and biochemically characterized. The optimum temperature condition of the recombinant enzyme was 65 °C, and the half-life was 84 h at 60 °C, whereas the enzyme was active over the range of pH 6.0-10.0 with maximal activity at pH 7.0. The α-glucosidase activity in shake flasks reached 107.9 U/mL and using 4-Nitrophenyl β-D-glucopyranoside (pNPG) as substrate, the K_m and Vmax values were 2.321 mM and 306.3 U/mg, respectively. The divalent ions Mn²⁺ and Ca²⁺ could improve GSJ activity by 32.1% and 13.8%. Moreover, the hydrolysis ability of recombinant α-glucosidase was almost the same as that of the commercial α-glucosidase (Bacillus stearothermophilus). In terms of the transglycosylation reaction, with 30% maltose syrup under the condition of 60 °C and pH 7.0, IMOs were synthesized with a conversion rate of 37%. These studies lay the basis for the industrial application of recombinant α-glucosidase.

Continuous Production of Isomalto-oligosaccharides by Thermo-inactivated Cells of Aspergillus niger J2 with Coarse Perlite as an Immobilizing Material

The coarse perlite 40-80 mesh was selected as an immobilizing material and put into a packed bed reactor (PBR) to continuously convert maltose to isomalto-oligosaccharides (IMOs). The PBR was prepared by mixing the thermo-inactivated cells (TIC) from Aspergillus niger J2 strain with the coarse perlite, then the mixture was put into an overpressure-resistant column. Compared with diatomite 40-80 mesh and thin perlite 80-120 mesh in PBR, coarse perlite was chosen as the best filtration aid, when the ratio of coarse perlite versus TIC was 1:1. The thermal and pH stability of the free and immobilized TIC and the optimum conditions for the transglycosylation reactions were determined. The results show that approximately 75 and 82% and 87 and 91% of α-glucosidase activity were reserved for free and immobilized TIC at temperatures from 30 to 60 °C and pH from 3.00 to 7.00 for 12 h, respectively. With 30% malt syrup under the conditions of 50 °C and pH 4.00, a mini-scale packed bed reactor (Mi-PBR) and medium-scale packed bed reactor (Me-PBR) could continuously produce IMO over 25 and 34 days with the yield of effective IMO (eIMO) ≥ 35% and total IMO (tIMO) ≥ 50%, respectively. The strategy of mixing the coarse perlite with TIC in PBR is a novel approach to continuously produce IMO and has great application potential in industry.

Optimization of Isomaltooligosaccharide Size Distribution by Acceptor Reaction of Weissella confusa Dextransucrase and Characterization of Novel α-(1→2)-Branched Isomaltooligosaccharides

Long-chain isomaltooligosaccharides (IMOs) are promising prebiotics. IMOs were produced by a Weissella confusa dextransucrase via maltose acceptor reaction. The inputs of substrates (i.e., sucrose and maltose, 0.15-1 M) and dextransucrase (1-10 U/g sucrose) were used to control IMO yield and profile. According to response surface modeling, 1 M sucrose and 0.5 M maltose were optimal for the synthesis of longer IMOs, whereas the dextransucrase dosage showed no significant effect. In addition to the principal linear IMOs, a homologous series of minor IMOs were also produced from maltose. As identified by MS(n) and NMR spectroscopy, the minor trisaccharide contained an α-(1→2)-linked glucosyl residue on the reducing residue of maltose and thus was α-d-glucopyranosyl-(1→2)-[α-d-glucopyranosyl-(1→4)]-d-glucopyranose (centose). The higher members of the series were probably formed by the attachment of a single unit branch to linear IMOs. This is the first report of such α-(1→2)-branched IMOs produced from maltose by a dextransucrase.