A Novel Cell Disruption Approach: Effectiveness of Laser-induced Cell Lysis of Pichia pastoris in the Continuous System

Strategies for cultivation, enhancing lipid production, and recovery in oleaginous yeasts

As global consumption of oil increases and environmental pollution worsens, people are becoming more concerned with sustainable energy development and environmental protection. There is an urgent need to find a sustainable and environmentally friendly new source of lipids to produce biodiesel and other products. In recent years, oleaginous yeast has garnered widespread interest due to its high lipid content. Compared with traditional plant oil sources, oleaginous yeast offers several significant advantages. Firstly, its cultivation is not affected by seasonal and climatic conditions. Secondly, yeast cultivation does not require large amounts of arable land. Additionally, oleaginous yeast grows rapidly, has a short production cycle, and can efficiently accumulate lipids. This review introduces several prominent oleaginous yeasts, focusing on the impact of cultivation conditions on lipid production, strategies to enhance lipid yield, and the development of lipid recovery methods.

Highly efficient strategy of lipopolysaccharide (LPS) decontamination from rHBsAg: synergistic effect of enhanced magnetic nanoparticles (MNPs) as an LPS affinity adsorbent (LAA) and surfactant as a dissociation factor

The interaction of lipopolysaccharide with a recombinant protein is a serious bottleneck, particularly in the purification step of bioprocessing. Recombinant hepatitis B surface antigen (rHBsAg), the active ingredient of the hepatitis B vaccine, is probably contaminated by extrinsic LPS like other biopharmaceuticals. This research intends to eliminate LPS from its mixture with rHBsAg efficiently. Immobilized polymyxin B on magnetic nanoparticles (PMB-MNPs) was synthesized and implemented as an enhanced LPS affinity adsorbent (LAA). The 20-80 EU/dose binary samples with and without surfactant were applied to PMB-MNPs. Formerly, dynamic light scattering (DLS) and transmission electron microscopy (TEM) were examined on the samples to qualitatively show the dissociation effect of the surfactant. Considering the high potential interaction of LPS with HBsAg, the dissociation effects of 0.5 and 1.5% Tween 20 on the binary samples were assessed using immunoaffinity chromatography (IAC) as a quantification tool. The dissociation effect of Tween 20 substantially diminished the interaction, leading to a proportional increase of free LPS up to 66%. The synergetic effect of Tween 20 and privileged LAA was highly effective in eliminating more than 80% of LPS with a remarkable LPS clearance factor of 5.8 and a substantial protein recovery rate of 97%.

Quantitative assessment of LPS-HBsAg interaction by introducing a novel application of immunoaffinity chromatography

Lipopolysaccharide (LPS), as a stubborn contamination, should be monitored and kept in an acceptable level during the pharmaceutical production process. Recombinant hepatitis B surface antigen (r-HBsAg) is one of the recombinant biological products, which is probable to suffer from extrinsic endotoxin due to its long and complex production process. This research aims to assess the potential interaction between LPS and r-HBsAg by recruiting immunoaffinity chromatography (IAC) as a novel tool to quantify the interaction. Molecular modeling was performed on the HBsAg molecule to theoretically predict its potential binding and interaction sites. Then dynamic light scattering (DLS) analysis was implemented on HBsAg, LPS, and mixtures of them to reveal the interaction. The virus-like particle (VLP) structure of HBsAg and the ribbon-like structure of LPS were visualized by transmission electron microscopy (TEM). Finally, the interaction was quantified by applying various LPS/HBsAg ratios ranging from 1.67 to 120 EU/dose in the IAC. Consequently, the LPS/HBsAg ratios in the eluate were measured from 1.67 to a maximum of 92.5 EU/dose. The results indicated that 77 to 100% of total LPS interacted with HBsAg by an inverse relationship to the incubated LPS concentration. The findings implied that the introduced procedure is remarkably practical in the quantification of LPS interaction with a target recombinant protein.

New horizons in developing cell lysis methods: A Review

Cell lysis is an essential step in many studies related to biology and medicine. Based on the scale and medium that cell lysis is carried out, there are three main types of the cell lysis: 1) lysis of the cells in the surrounding environment, 2) lysis of the isolated or cultured cells and 3) Single cell lysis. Conventionally, several cell lysis methods have been developed, such as freeze-thawing, bead beating, incursion in liquid nitrogen, sonication and enzymatic and chemical based approaches. In recent years, various novel technologies have been employed to develop new methods of cell lysis. The aim of studies in this field is to introduce more precise and efficient tools or to reduce the costs of cell lysis procedures. Nanostructure based lysis methods, acoustic oscillation, electrical current, irradiation, bacteria-mediated cell lysis, magnetic ionic liquids, bacteriophage genes, monolith columns, hydraulic forces and steam explosion are some examples of new developed cell lysis methods. Beside the significant advances in this field, there are still many challenges and the tools must be further improved. This article is protected by copyright. All rights reserved.

Application of a 3D printed miniaturized hydrocyclone in biopharmaceutical industry-numerical and experimental studies of yeast separation from fermentation culture media

Various industries ranging from water purification to pharmaceutical production have experienced multi separation steps that impose more process time and contamination possibility by batch operation. We propose a developed microfluidic particle sorter (miniaturized hydrocyclone) that adopts centrifugal force as it has ability to decline the number of separation steps and the risk of extrinsic contamination in continuous process. While biological industries have not relied on mini hydrocyclones considerably because of low efficiency and microfabrication difficulties, current work has been planned to conquer these obstacles. In this research, biomass separation from fermentation broth by 3 mm hydrocyclones was investigated. The effect of apex size, feed flow rate, hydrocyclone geometry were analyzed numerically in four mini-hydrocyclones. The most efficient mini-hydrocyclone was chosen to be made by elegant additive manufacturing technology and studied experimentally. The separation efficiency was achieved up to 90% while the concentration ratio of heavy stream (apex) to dilute stream (vortex finder) was reached more than twofold. The mini hydrocyclone performance in view of energy target was studied by Euler-Reynolds-Efficiency plots. The 4 μm cut size was achieved that is promising high throughput separation for biological particles.

Characterization of extracellular vesicles derived from mesenchymal stromal cells by surface-enhanced Raman spectroscopy

Extracellular vesicles (EVs) are secreted by all cells into bodily fluids and play an important role in intercellular communication through the transfer of proteins and RNA. There is evidence that EVs specifically released from mesenchymal stromal cells (MSCs) are potent cell-free regenerative agents. However, for MSC EVs to be used in therapeutic practices, there must be a standardized and reproducible method for their characterization. The detection and characterization of EVs are a challenge due to their nanoscale size as well as their molecular heterogeneity. To address this challenge, we have fabricated gold nanohole arrays of varying sizes and shapes by electron beam lithography. These platforms have the dual purpose of trapping single EVs and enhancing their vibrational signature in surface-enhanced Raman spectroscopy (SERS). In this paper, we report SERS spectra for MSC EVs derived from pancreatic tissue (Panc-MSC) and bone marrow (BM-MSC). Using principal component analysis (PCA), we determined that the main compositional differences between these two groups are found at 1236, 761, and 1528 cm^-1, corresponding to amide III, tryptophan, and an in-plane -C=C- vibration, respectively. We additionally explored several machine learning approaches to distinguish between BM- and Panc-MSC EVs and achieved 89 % accuracy, 89 % sensitivity, and 88 % specificity using logistic regression.

Application of hydrocyclone for separation of Pichia pastoris produced r-HBsAg from fermentation culture: impact of concentration and pressure on hydrocyclone performance

Separation of biomass from culture media by centrifugation and then washing the biomass are mandatory steps in the fermentation process of recombinant Pichia pastoris expressed HBsAg intracellularly. Biomass has to be washed many times to eliminate the culture media residues thoroughly. In this study, we tried to develop the hydrocyclone as an alternative method for separation of biomass from fermentation culture, an attractive replacement for centrifugation processes. The advantages of using hydrocyclone in biomass separation could be summarized in its suitability for continuous separation and its low risk of contamination. To evaluate the performance of hydrocyclone, concentration ratio in underflow to feed stream, capacity, and centrifugal force by considering three parameters of pressure drop, concentration, and the type of hydrocyclone were investigated. Using three level factorial design a concentration ratio equation was developed, with the correlation coefficient R² = 0.977 ensured the good fitness of the predicted data with the experimental results. In optimal conditions, maximum concentration ratio was 1.246, for flow rate 13.5 LPM and C-force equal to 1276.11 at maximum pressure drop (3 bar) and minimum concentration (0.5% w/w) in hydrocyclone 1. Herein, two different hydrocyclones with the cylindrical diameters of 19 mm and 21 mm were used for separating the yeast cells.

Accurate and cost-effective prediction of HBsAg titer in industrial scale fermentation process of recombinant Pichia pastoris by using neural network based soft sensor

In the current work, the attempt was made to apply best-fitted artificial neural network (ANN) architecture and the respective training process for predicting final titer of hepatitis B surface antigen (HBsAg), produced intracellularly by recombinant Pichia pastoris Mut⁺ in the commercial scale. For this purpose, in large-scale fed-batch fermentation, using methanol for HBsAg induction and cell growth, three parameters of average specific growth rate, biomass yield, and dry biomass concentration-in the definite integral form with respect to fermentation time-were selected as input vectors; the final concentration of HBsAg was selected for the ANN output. Used dataset consists of 38 runs from previous batches; feed-forward ANN 3:5:1 with training algorithm of backpropagation based on a Bayesian regularization was trained and tested with a high degree of accuracy. Implementing the verified ANN for predicting the HBsAg titer of the five new fermentation runs, excluded from the dataset, in the full-scale production, the coefficient of regression and root-mean-square error were found to be 0.969299 and 2.716774, respectively. These results suggest that this verified soft sensor could be an excellent alternative for the current relatively expensive and time-intensive analytical techniques such as enzyme-linked immunosorbent assay in the biopharmaceutical industry.

A novel application of ion exchange chromatography in recombinant hepatitis B vaccine downstream processing: Improving recombinant HBsAg homogeneity by removing associated aggregates

Production of recombinant HBsAg as a main component of the hepatitis B vaccine has already been established in commercial scale. So far, many studies have been performed to optimize the production process of this recombinant vaccine. However, still aggregation and dissociation of rHBsAg virus-like particles (VLPs) are major challenges in downstream processing of this biomedicine. The structural diversity of rHBsAg is dependent on many factors including cell types, molecular characteristics of the expressed recombinant rHBsAg, buffer composition as well as operation condition and specific characteristics of each downstream processing unit. Hence, it is not relatively easy to implement a single strategy to prevent aggregation formation in already established rHBsAg production processes. In this study, we examined the efficacy of weak anion exchange chromatography (IEC)- packed with DEAE Sepharose Fast Flow medium- on isolation of rHBsAg VLPs from aggregated structures. For this purpose, the influence of ionic strength of elution buffer as a key factor was investigated in isolation and recovery of rHBsAg VLPs. The elution buffer with electrical conductivity between 27 and 31 mS/cm showed the best results for removing aggregated rHBsAg based on SEC-HPLC analysis. The results showed that in the selected conductivity range, about 79% of rHBsAg was recovered with purity above 95%. The percentage of rHBsAg VLPs in the recovered sample was between 94% and 97.5% indicating that we could obtain highly homogeneous rHBsAg within the acceptable quality level. The TEM, SDS-PAGE and western blot analysis were also in agreement with our quantitative measurements.

Application of recurrent neural network for online prediction of cell density of recombinant Pichia pastoris producing HBsAg

Artificial neural networking (ANN) seems to be a promising soft sensor for implementing current approaches of quality by design (QbD) and process analytical technologies (PAT) in the biopharmaceutical industry. In this study, we aimed to implement best-fitted ANN architecture for online prediction of the biomass amount of recombinant Pichia pastoris (P. pastoris) - expressing intracellular hepatitis B surface antigen (HBsAg) - during the fed-batch fermentation process using methanol as a sole carbon source. For this purpose, at the induction phase of methanol fed-batch fermentation, carbon evolution rate (CER), dissolved oxygen (DO), and methanol feed rate were selected as input vectors and total wet cell weight (WCW) was considered as output vector for the ANN. The obtained results indicated that after training recurrent ANN with data sets of four fed-batch runs, this toolbox could predict the WCW of the next fed-batch fermentation process at each specified time point with high accuracy. The R-squared and root-mean-square error between actual and predicted values were found to be 0.9985 and 13.73, respectively. This verified toolbox could have major importance in the biopharmaceutical industry since recombinant P. pastoris is widely used for the large-scale production of HBsAg.

Integration of size-exclusion chromatography and ultracentrifugation for purification of recombinant hepatitis B surface antigen: An alternative method for immunoaffinity chromatography

In purification process of recombinant hepatitis B surface antigen (rHBsAg), immunoaffinity chromatography (IAF) is one of the most important and effective steps in rHBsAg purification. However, the buffer composition and the interaction of ligands-rHBsAg often lead to disassembly, deformation, and clumping of a portion of these virus-like particles (VLPs). Besides, the expensive media, variable biospecific ligand density and the possibility of product contamination are other reported drawbacks of using IAF which makes the production process of rHBsAg more challenging. This study investigated the possibility of substituting IAF with purification methods of size-exclusion chromatography (SEC) and ultracentrifugation. In the SEC, the efficacy of rHBsAg purification was examined by four different media in which Toyopearl HW 65S resin demonstrated the best results. By integrating Toyopearl HW 65S resin - with a bed height of 51 cm - and ultracentrifugation process at 47,000 rpm for 48 hr, 95% of protein impurities were removed. Compared to the IAF in rHBsAg production, the purified sample contained a higher percentage of multimeric rHBsAg particles without any noticeable monomer and aggregate forms. The result of this study indicates that the proposed integrated system could be an efficient mild purification alternative for conventional IAF.