Au Nanoparticle-decorated Nanoporous PEDOT Modified Glassy Carbon Electrode: A New Electrochemical Sensing Platform for the Detection of Glutathione

Harnessing protein sensing ability of electrochemical biosensors via a controlled peptide receptor-electrode interface

BACKGROUND

Cathepsin B, a cysteine protease, is considered a potential biomarker for early diagnosis of cancer and inflammatory bowel diseases. Therefore, more feasible and effective diagnostic method may be beneficial for monitoring of cancer or related diseases.

RESULTS

A phage-display library was biopanned against biotinylated cathepsin B to identify a high-affinity peptide with the sequence WDMWPSMDWKAE. The identified peptide-displaying phage clones and phage-free synthetic peptides were characterized using enzyme-linked immunosorbent assays (ELISAs) and electrochemical analyses (impedance spectroscopy, cyclic voltammetry, and square wave voltammetry). Feasibilities of phage-on-a-sensor, peptide-on-a-sensor, and peptide-on-a-AuNPs/MXene sensor were evaluated. The limit of detection and binding affinity values of the peptide-on-a-AuNPs/MXene sensor interface were two to four times lower than those of the two other sensors, indicating that the peptide-on-a-AuNPs/MXene sensor is more specific for cathepsin B (good recovery (86-102%) and %RSD (< 11%) with clinical samples, and can distinguish different stages of Crohn's disease. Furthermore, the concentration of cathepsin B measured by our sensor showed a good correlation with those estimated by the commercially available ELISA kit.

CONCLUSION

In summary, screening and rational design of high-affinity peptides specific to cathepsin B for developing peptide-based electrochemical biosensors is reported for the first time. This study could promote the development of alternative antibody-free detection methods for clinical assays to test inflammatory bowel disease and other diseases.

A Novel Microfluidic-Based OMC-PEDOT-PSS Composite Electrochemical Sensor for Continuous Dopamine Monitoring

Fast and precise analysis techniques using small sample volumes are required for next-generation clinical monitoring at the patient's bedside, so as to provide the clinician with relevant chemical data in real-time. The integration of an electrochemical sensor into a microfluidic chip allows for the achievement of real-time chemical monitoring due to the low consumption of analytes, short analysis time, low cost, and compact size. In this work, dopamine, used as a model, is an important neurotransmitter responsible for controlling various vital life functions. The aim is to develop a novel serpentine microfluidic-based electrochemical sensor, using a screen-printed electrode for continuous dopamine detection. The developed sensor employed the composite of ordered mesoporous carbon (OMC) and poly (3,4 ethylenedioxythiophene)-poly (styrene sulfonate) (PEDOT-PSS). The performance of a microfluidic, integrated with the sensor, was amperometrically evaluated using a computer-controlled microfluidic platform. The microfluidic-based dopamine sensor exhibited a sensitivity of 20.2 ± 0.6 μA μmol L^-1, and a detection limit (LOD) of 21.6 ± 0.002 nmol L^-1, with high selectivity. This microfluidic-based electrochemical sensor was successfully employed to determine dopamine continuously, which could overcome the problem of sensor fouling with more than 90% stability for over 24 h. This novel microfluidic sensor platform provides a powerful tool for the development of a continuous dopamine detection system for human clinical application.

Development of GO/Co/Chitosan-Based Nano-Biosensor for Real-Time Detection of D-Glucose

Electrochemical nano-biosensor systems are popular in the industrial field, along with evaluations of medical, agricultural, environmental and sports analysis, because they can simultaneously perform qualitative and quantitative analyses with high sensitivity. However, real-time detection using an electrochemical nano-biosensor is greatly affected by the surrounding environment with the performance of the electron transport materials. Therefore, many researchers are trying to find good factors for real-time detection. In this work, it was found that a composite composed of graphite oxide/cobalt/chitosan had strong stability and electron transfer capability and was applied to a bioelectrochemical nano-biosensor with high sensitivity and stability. As a mediator-modified electrode, the GO/Co/chitosan composite was electrically deposited onto an Au film electrode by covalent boding, while glucose oxidase as a receptor was immobilized on the end of the GO/Co/chitosan composite. It was confirmed that the electron transfer ability of the GO/Co/chitosan composite was excellent, as shown with power density analysis. In addition, the real-time detection of D-glucose could be successfully performed by the developed nano-biosensor with a high range of detected concentrations from 1.0 to 15.0 mM. Furthermore, the slope value composed of the current, per the concentration of D-glucose as a detection response, was significantly maintained even after 14 days.

A novel electrochemical conducting polymer sensor for the rapid, selective and sensitive detection of biothiols

A rapid, selective and sensitive, novel conducting-polymer sensing platform for the detection and analysis of biothiols.

A web of poly(bisbenzimidazolatocopper(ii)) around multiwalled carbon nanotubes for the electrochemical detection of hydrogen peroxide

The present work focuses on the electrochemical determination of hydrogen peroxide (H2O2), using a poly(bisbenzimidazolatocopper(ii)) coordinated multiwalled carbon nanotube modified glassy carbon electrode (MWCNT/(BIM–Cu2+)n@GCE).

Enhancing osteogenesis of adipose-derived mesenchymal stem cells using gold nanostructure/peptide-nanopatterned graphene oxide

Graphene derivatives are highly promising materials for use in stem-cell-based regenerative therapies, particularly for bone regeneration. Herein, we report a graphene oxide (GO)-based hybrid platform (GOHP) that is highly effective for guiding the osteogenesis of human adipose-derived mesenchymal stem cells (hAMSCs). A GO-coated indium tin oxide (ITO) substrate was electrochemically modified with Au nanostructures (GNSs), following which a cysteine-modified quadruple-branched arginine-glycine-aspartic acid was self-assembled on the ITO-GO-GNS hybrid via Au-S bonds. The synthesized GOHP, with the highest density of GNSs (deposition time of 120 s), exhibited the highest osteogenic differentiation efficiency based on the osteogenic marker expression level, osteocalcin expression, and osteoblastic mineralisation. Remarkably, although GO is known to be less efficient than the high-quality pure graphene synthesised via chemical vapour deposition (CVD), the fabricated GOHP exhibited an efficiency similar to that of CVD-grown graphene in guiding the osteogenesis of hAMSCs. The total RNA sequencing results revealed that CVD graphene and GOHP induced the osteogenesis of hAMSCs by upregulating the transcription factors related to direct osteogenesis, Wnt activation, and extracellular matrix deposition. Considering that GO is easy to produce, cost-effective, and biocompatible, the developed GOHP is highly promising for treating various diseases/disorders, including osteoporosis, rickets, and osteogenesis imperfecta.

Simple synthesis of a clew-like tungsten carbide nanocomposite decorated with gold nanoparticles for the ultrasensitive detection of tert-butylhydroquinone

The excessive use of food additives in manufactured food products negatively affects their quality and potentially impacts human health. In the present study, a composite consisting of gold nanoparticles decorated on tungsten carbide (AuNP-WC) was successfully fabricated using a facile and cost-effective ultrasonication technique. Compared to a bare glassy carbon electrode (GCE), AuNP-GCE, and WC-GCE, the AuNP-WC-GCE demonstrated excellent sensing performance for tert-butylhydroquinone (TBHQ) when used as an electrocatalyst in 0.05 M phosphate buffer solution (PBS), with a low working potential and a high peak current. In particular, the composite was able to detect the oxidation of TBHQ within a linear concentration range of 5 to 75 nM, with an extremely low detection limit of 0.20 nM. The practicability of the sensor was also assessed in the analysis of TBHQ in real samples of soybean oil, blended oil, and red wine, with satisfactory recovery rates obtained.