Cetirizine dihydrochloride loaded microparticles design using ionotropic cross-linked chitosan nanoparticles by spray-drying method

The Taste-Masking Mechanism of Chitosan at the Molecular Level on Bitter Drugs of Alkaloids and Flavonoid Glycosides from Traditional Chinese Medicine

Taste masking of traditional Chinese medicines (TCMs) containing multiple bitter components remains an important challenge. In this study, berberine (BER) in alkaloids and phillyrin (PHI) in flavonoid glycosides, which are common bitter components in traditional Chinese medicines, were selected as model drugs. Chitosan (CS) was used to mask their unfriendly taste. Firstly, from the molecular level, we explained the taste-masking mechanism of CS on those two bitter components in detail. Based on those taste-masking mechanisms, the bitter taste of a mixture of BER and PHI was easily masked by CS in this work. The physicochemical characterization results showed the taste-masking compounds formed by CS with BER (named as BER/CS) and PHI (named as PHI/CS) were uneven in appearance. The drug binding efficiency of BER/CS and PHI/CS was 50.15 ± 2.63% and 67.10 ± 2.52%, respectively. The results of DSC, XRD, FTIR and molecular simulation further indicated that CS mainly masks the bitter taste by disturbing the binding site of bitter drugs and bitter receptors in the oral cavity via forming hydrogen bonds between its hydroxyl or amine groups and the nucleophilic groups of BER and PHI. The taste-masking evaluation results by the electronic tongue test confirmed the excellent taste-masking effects on alkaloids, flavonoid glycosides or a mixture of the two kinds of bitter components. The in vitro release as well as in vivo pharmacokinetic results suggested that the taste-masked compounds in this work could achieve rapid drug release in the gastric acid environment and did not influence the in vivo pharmacokinetic results of the drug. The taste-masking method in this work may have potential for the taste masking of traditional Chinese medicine compounds containing multiple bitter components.

Chitosan-centered nanosystems as sustained therapeutics for allergic rhinitis intervention: Inhibition of histamine-induced cascades

Allergic rhinitis (AR), histamine-mediated upper airway inflammatory disorder, is characterized by sneezing, itching, airway hyperreactivity, etc. Though it is clinically well-managed by non-invasive inhaled antihistamines, for example, ketotifen (KT, histamine release inhibitor) and cetirizine (CTZ, histamine receptor antagonist), inherent defects of short mucosal in situ retention, frequent administration resulting in irritation to mucosa, and lack of target-specific sequential release of dual drug systems which have been proven to be more effective are inevitable, urging for alternative therapeutic strategies. Recent advances in nanotechnology may be pivotal to generating muco-adhesive nanosystems, which is desirable to prolong local retention, reduce dosing frequency and relieve mucosal irritation. In this regard, KT incorporated and CTZ decorated hydroxybutyl chitosan nanoparticles (K ⊂ CH NPs) were fabricated as nasal adaptive sequential release dual drug system for long-term AR therapy. Nasal adaptive morphology transformation and two-step payload release up to 72 h were achieved in vitro, with ~ 3-fold higher bio-adhesivity over free drugs appeared. K ⊂ CH NPs accomplished longer histamine release inhibition (~ 24 h) and histamine H₁ receptor antagonism (~ 6 h), compared with free KT&CTZ of ~ 12 h and ~ 2 h, respectively. The nanosystems provided comparable anti-allergic effect to free antihistamines via successive intranasal dropping in AR rat, while encouragingly, significantly (P < 0.05) better therapeutic efficacy at reduced treatment frequency (every 4 days) and dose (half-dose). Therefore, the outcomes establish K ⊂ CH NPs as effective low-dose and long-interval administered nanosystems to ameliorate histamine-mediated AR inflammation, which could in principal find extensive utilizations in respiratory allergy intervention.

Nanosystems as curative platforms for allergic disorder management

Allergy, IgE-mediated inflammatory disorders including allergic rhinitis, asthma, and conjunctivitis, affects billions of people worldwide. Conventional means of allergy management include allergen avoidance, pharmacotherapy, and emerging therapies. Among them, chemotherapeutant intake via oral, intravenous, and intranasal routes is always the most common mean. Although current pharmacotherapy exhibit splendid anti-allergic effects, short in situ retention, low bioavailability, and systemic side effects are inevitable. Nowadays, nanoplatforms have provided alternative therapeutic options to obviate the existing weakness via enhancing the solubility of hydrophobic therapeutic agents, achieving in situ drug accumulation, exhibiting controlled and long-time drug release at lesion areas, and providing multi-functional therapeutic strategies. Herein, we highlight the clinical therapeutic strategies and deal with characteristics of the nanoplatform design in allergy interventions via intratracheal, gastrointestinal, intravenous, and ocular paths. The promising therapeutic utilization in a variety of allergic disorders is discussed, and recent perspectives on the feasible advances of nanoplatforms in allergy management are also exploited.

Nanochitosan: Commemorating the Metamorphosis of an ExoSkeletal Waste to a Versatile Nutraceutical

Chitin (poly-N-acetyl-D-glucosamine) is the second (after cellulose) most abundant organic polymer. In its deacetylated form-chitosan-becomes a very interesting material for medical use. The chitosan nano-structures whose preparation is described in this article shows unique biomedical value. The preparation of nanochitosan, as well as the most vital biomedical applications (antitumor, drug delivery and other medical uses), have been discussed in this review. The challenges confronting the progress of nanochitosan from benchtop to bedside clinical settings have been evaluated. The need for inclusion of nano aspects into chitosan research, with improvisation from nanotechnological inputs has been prescribed for breaking down the limitations. Future perspectives of nanochitosan and the challenges facing nanochitosan applications and the areas needing research focus have been highlighted.

Connecting the dots in drug delivery: A tour d'horizon of chitosan-based nanocarriers system

One of the most promising pharmaceutical research areas is developing advanced delivery systems for controlled and sustained drug release. The drug delivery system (DDS) can be designed to strengthen the pharmacological and therapeutic characteristics of different medicines. Natural polymers have resolved numerous commencing hurdles, which hindered the clinical implementation of traditional DDS. The naturally derived polymers furnish various advantages such as biodegradability, biocompatibility, inexpensiveness, easy availability, and biologically identifiable moieties, which endorse cellular activity in contrast to synthetic polymers. Among them, chitosan has recently been in the spotlight for devising safe and efficient DDSs due to its superior properties such as minimal toxicity, bio-adhesion, stability, biodegradability, and biocompatibility. The primary amino group in chitosan shows exceptional qualities such as the rate of drug release, anti-microbial properties, the ability to cross-link with various polymers, and macrophage activation. This review intends to provide a glimpse into different practical utilization of chitosan as a drug carrier. The first segment of the review will give cognizance into the source of extraction and chitosan's remarkable properties. Further, we have endeavored to provide recent literature pertaining to chitosan applications in various drug delivery systems via different administration routes along with current patented chitosan formulations.

Levocetirizine Dihydrochloride-Loaded Chitosan Nanoparticles: Formulation and In Vitro Evaluation

Objectives

The aim of the present study was to formulate levocetirizine hydrochloride (LCD)-loaded chitosan nanoparticles at submicron level with high entrapment efficiency and prolonged effect for optimizing the plasma drug concentration enhancing bioavailability.

Materials and Methods

LCD was successfully incorporated into chitosan nanoparticles by spray drying for the purpose of oral application. In vitro characteristics were evaluated in detail.

Results

LCD was successfully loaded into the polymeric matrices by spray drying. Characterization of the nanoparticles including encapsulation efficiency, particle size, zeta potential, morphology, polydispersity index, solid-state characterizations, and LCD quantification by high performance liquid chromatography was performed. The release pattern of LCD from the nanoparticles was determined using a dialysis tube in simulated intestinal fluid (pH 6.8). In vitro release profiles indicated prolonged release of LCD from the nanoparticles that followed the Korsmeyer-Peppas kinetic model.

Conclusion

Chitosan-based LCD-loaded polymeric nanoparticles appear to be a promising drug delivery system for the active agent.

In Vitro Dissolution Model Can Predict the in Vivo Taste Masking Performance of Coated Multiparticulates

The majority of active pharmaceutical ingredients (APIs) are bitter. Therefore, compliance can be a problem where adequate taste masking has not been achieved; this is most problematic in pediatrics. Taste masking is thus a key stage during pharmaceutical development with an array of strategies available to the formulation scientist. Solid oral dosage forms can be taste-masked quite simply by polymer coating, which prevents drug release in the mouth, without unwantedly impairing drug release further down the gastrointestinal tract. At the early stages of pharmaceutical development, an in vitro method for the assessment of taste masking is necessary given the lack of toxicological data preventing the use of human taste panels. Currently, there is no such tool allowing prediction of taste masking efficiency. In this study, drug dissolution in the context of aversive taste thresholds was proposed as a means to bridge this knowledge gap. Thus, a biorelevant buccal dissolution test was developed in which previously determined taste thresholds in vivo were used to evaluate taste masking efficiency: if drug release exceeded said thresholds, the formulation was deemed to be poorly taste-masked, and vice versa. This novel dissolution test was compared to the USP I (basket) dissolution test, and the biopharmaceutical implications of taste masking were also assessed by performing USP I (basket) dissolution testing in simulated gastric fluid (SGF). Chlorphenamine maleate, a model bitter BCS class 1 API, was layered onto sugar spheres and taste-masked using polymer coatings. An array of coating technologies were employed and assessed single blinded: two pH-independent water-insoluble coatings (Surelease:Opadry at 8, 12, and 16% weight gain and Opadry EC at 4, 6, and 8% weight gain) and a pH-dependent water-insoluble reverse-enteric coating (developmental fully formulated system based on Kollicoat Smartseal 100P at 10% weight gain). Both the biorelevant buccal and the USP I dissolution tests were capable of discriminating between both type and level of coating used. However, only the buccal dissolution test was able to provide absolute quantification of the level of taste masking achieved in the context of previously determined taste thresholds, while the USP I test merely provided a relative comparison between the different technologies assessed. When the release data from the buccal test were assessed in parallel to that in SGF, it was possible to predict in vitro optimized taste masking without compromising bioavailability. The fully formulated system based on Smartseal 100P was identified as the most effective coating and Surelease:Opadry the least effective. The developed methodology provides true insight for the formulator, enabling more informed patient-centric formulation decisions, better taste masking, and ultimately more effective medicines.

Chitosan-based nanoparticles as drug delivery systems: a review on two decades of research

Chitosan (CS) is one of the most functional natural biopolymer widely used in the pharmaceutical field due to its biocompatibility and biodegradability. These privileges lead to its application in the synthesis of nanoparticles for the drug during the last two decades. This article gives rise to a general review of the different chitosan nanoparticles (CSNPs) preparation techniques: Ionic gelation, emulsion cross-linking, spray-drying, emulsion-droplet coalescence method, nanoprecipitation, reverse micellar method, desolvation method, modified ionic gelation with radial polymerisation and emulsion solvent diffusion, from the point of view of the methodological and mechanistic aspects involved. The physicochemical behaviour of CSNPs including drug loading, drug release, particles size, zeta potential and stability are briefly discussed. This review also directs to bring an outline of the major applications of CSNPs in drug delivery according to drug and route of administration. Finally, derivatives of CSNPs and CS nano-complexes are also discussed.

Nano and Microparticulate Chitosan Based System for Formulation of Carvedilol Rapid Melt Tablet

PURPOSE

In the present study rapid melt tablets (RMT's) of carvedilol were prepared by using ionotropic-gelated chitosan nanoparticles using a spray-drying method. Carvedilol is beta-adrenergic antagonist and its oral bioavailability is about 25-35% because of first pass metabolism.

METHODS

The spray-dried microparticles were formulated into RMT's using a wet granulation process. The Formulation and optimization of carvedilol loaded RMTs using nano and microparticulate chitosan based system (NMCS) was done by using 32 factorial designs.

RESULTS

Drug entrapment efficiency of about 64.9 % (w/w) and loading capacity of 14.44% (w/w) were achieved for the microparticles, which were ranged from 1 μm to 4 μm in diameter. RESULTS of disintegration tests showed that the formulated RMTs could be completely dissolved within 40 seconds. Dissolution studies suggested that Carvedilol is released more slowly from tablets made using the microencapsulation process compared with tablets containing Carvedilol that is free or in the form of nanoparticles.

CONCLUSION

RESULTS shown that the development of new RMTs designed with crosslinked microparticle might be a rational way to overcome the unwanted taste of conventional RMTs and the side effects related to Carvedilol intrinsic characteristics. The development of Carvedilol NMCS using ludiflash as RMTs could be used as a promising approach for improving the solubility and oral bioavailability of water insoluble drug.

Application of a novel 3-fluid nozzle spray drying process for the microencapsulation of therapeutic agents using incompatible drug-polymer solutions

The aim of this study was to evaluate a novel 3-fluid concentric nozzle (3-N) spray drying process for the microencapsulation of omeprazole sodium (OME) using Eudragit L100 (EL100). Feed solutions containing OME and/or EL100 in ethanol were assessed visually for OME stability. Addition of OME solution to EL100 solution resulted in precipitation of OME followed by degradation of OME reflected by a colour change from colourless to purple and brown. This was related to the low pH of 2.8 of the EL100 solution at which OME is unstable. Precipitation and progressive discoloration of the 2-fluid nozzle (2-N) feed solution was observed over the spray drying time course. In contrast, 3-N solutions of EL100 or OME in ethanol were stable over the spray drying period. Microparticles prepared using either nozzle showed similar characteristics and outer morphology however the internal morphology was different. DSC showed a homogenous matrix of drug and polymer for 2-N microparticles while 3-N microparticles had defined drug and polymer regions distributed as core and coat. The results of this study demonstrate that the novel 3-N spray drying process can allow the microencapsulation of a drug using an incompatible polymer and maintain the drug and polymer in separate regions of the microparticles.

Triggering effect of N-acetylglucosamine on retarded drug release from a lectin-anchored chitosan nanoparticles-in-microparticles system

The aim of this study was to investigate the use of N-acetylglucosamine (NAG) to accelerate drug release from a lectin-modified carrier. A wheat germ agglutinin (WGA)-anchored salmeterol xinafoate (SalX)-loaded nanoparticles-in-microparticles system (NiMS) was prepared with an ionotropic gelation technique combined with a spray drying method. The formulated microparticles were spherical, with diameters ranging mainly from 2 to 8 μm; the drug entrapment efficiency was >70% (w/w), and the loading capacity was approximately 8% (w/w). Drug release from WGA-SalX-NiMS, within the first 4h, was approximately 30% less than that from SalX-NiMS, indicating an effect of lectin-modification to retard drug release from the NiMS. Due to "sugar-lectin" interactions, drug release from WGA-SalX-NiMS was substantially increased after the addition of NAG to the release medium. However, no significant influence of NAG was observed on the drug release profile of SalX-NiMS without WGA anchorage. The characteristics of NAG-WGA interaction may provide valuable insights into the "triggering-effects" of specific sugars on drug release from lectin-anchored carriers. These results suggest that it is possible to control drug release from a lectin-anchored drug delivery system using a specific sugar, and that the designed novel WGA-SalX-NiMS may be a suitable formulation for chronotherapy of asthma.

Prospects of pharmaceuticals and biopharmaceuticals loaded microparticles prepared by double emulsion technique for controlled delivery

Several methods and techniques are potentially useful for the preparation of microparticles in the field of controlled drug delivery. The type and the size of the microparticles, the entrapment, release characteristics and stability of drug in microparticles in the formulations are dependent on the method used. One of the most common methods of preparing microparticles is the single emulsion technique. Poorly soluble, lipophilic drugs are successfully retained within the microparticles prepared by this method. However, the encapsulation of highly water soluble compounds including protein and peptides presents formidable challenges to the researchers. The successful encapsulation of such compounds requires high drug loading in the microparticles, prevention of protein and peptide degradation by the encapsulation method involved and predictable release, both rate and extent, of the drug compound from the microparticles. The above mentioned problems can be overcome by using the double emulsion technique, alternatively called as multiple emulsion technique. Aiming to achieve this various techniques have been examined to prepare stable formulations utilizing w/o/w, s/o/w, w/o/o, and s/o/o type double emulsion methods. This article reviews the current state of the art in double emulsion based technologies for the preparation of microparticles including the investigation of various classes of substances that are pharmaceutically and biopharmaceutically active.

A novel spray-dried nanoparticles-in-microparticles system for formulating scopolamine hydrobromide into orally disintegrating tablets

Scopolamine hydrobromide (SH)-loaded microparticles were prepared from a colloidal fluid containing ionotropic-gelated chitosan nanoparticles using a spray-drying method. The spray-dried microparticles were then formulated into orally disintegrating tablets (ODTs) using a wet granulation tablet formation process. A drug entrapment efficiency of about 90% (w/w) and loading capacity of 20% (w/w) were achieved for the microparticles, which ranged from 2 μm to 8 μm in diameter. Results of disintegration tests showed that the formulated ODTs could be completely dissolved within 45 seconds. Drug dissolution profiles suggested that SH is released more slowly from tablets made using the microencapsulation process compared with tablets containing SH that is free or in the form of nanoparticles. The time it took for 90% of the drug to be released increased significantly from 3 minutes for conventional ODTs to 90 minutes for ODTs with crosslinked microparticles. Compared with ODTs made with noncrosslinked microparticles, it was thus possible to achieve an even lower drug release rate using tablets with appropriate chitosan crosslinking. Results obtained indicate that the development of new ODTs designed with crosslinked microparticles might be a rational way to overcome the unwanted taste of conventional ODTs and the side effects related to SH’s intrinsic characteristics.