Self-cleaning of superhydrophobic nanostructured surfaces at low humidity enhanced by vertical electric field

Preparation and Anti-Icing Properties of Zirconia Superhydrophobic Coating

Zirconia (ZrO2) is a ceramic material with high-temperature resistance and good insulating properties. Herein, for the first time, the surface of ZrO2 was modified with docosanoic acid (DCA) to improve its self-cleaning and hydrophobic properties. This surface modification transformed the surface of ZrO2 from hydrophilic to superhydrophobic. A two-step spraying method was used to prepare the superhydrophobic surface of ZrO2 by sequentially applying a primer and a topcoat. The primer was a solution configured using an epoxy resin as the adhesive and polyamide as the curing agent, while the topcoat was a modified ZrO2 solution. The superhydrophobic surface of ZrO2 exhibited a contact angle of 154° and a sliding angle of 4°. Scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy, thermogravimetric analysis, and other analytical techniques were used to characterize the prepared zirconia particles and their surfaces. Moreover, results from surface self-cleaning and droplet freezing tests showed that DCA-modified ZrO2 can be well combined, and its coatings show good self-cleaning and anti-icing properties on TA2 bases.

Multifunctional coatings fabricated from Chinese hemp-derived superhydrophobic micro-nanocellulose

Ecologically feasible strategies for constructing superhydrophobic surfaces offer versatile applications in waterproofing, self-cleaning, selective absorption, and corrosion protection. Herein, we prepared low-surface-energy branched-chain-enriched micronanorod (F@SiO2@MNC) by hydrolyzing silane coupling agent and modifying fluoropolymer using micro-nanocellulose extracted from waste straw (Chinese hemp). These rods were sprayed and adhered to various substrates precoated with a binder, resulting in superhydrophobic surfaces. F@SiO2@MNC addition allowed for the formation of stable spherical liquid droplets when in contact with different types of aqueous liquids. Furthermore, these surfaces demonstrated excellent self-cleaning, robustness, abrasion resistance, UV resistance, cycling stability, and other multifunctionalities. They significantly enhanced the mechanical properties of filter paper, effectively separated oil water mixtures, and improved the corrosion resistance of metals. Our proposed strategy represents a novel approach for developing multifunctional coatings assembled from micronanocellulose.

Direct Write Printing of Ultraviolet-Curable Bulk Superhydrophobic Ink Material

Although superhydrophobic surfaces have various promising applications, their fabrication methods are often limited to 2D plane surfaces that are vulnerable to abrasion and have limited adhesion to the substrate. Herein, an ultraviolet (UV) curable ink with bulk superhydrophobicity, consisting of poly(dimethylsiloxane) (PDMS) resins, hydrophobic silica, and solvent (porogen), was successfully developed for UV-assisted direct write printing processing. After UV curing of the ink followed by solvent evaporation, the generated porous structure cooperates with silica particles to form a self-similar and hierarchical structure throughout the bulk material, which can keep its original morphology even after cyclic abrasion (over 1000 times) and thus exhibits durable superhydrophobicity. With this unique ink, UV-assisted direct write printing can not only create 2D superhydrophobic surfaces on various substrates (e.g., paper and wire mesh) but also fabricate self-supporting 3D superhydrophobic objects for various applications such as waterproofing and oil-water separation. The printed objects exhibited a stable superhydrophobicity against liquid corrosion and mechanical damage. In addition, the 3D printing approach can be used to optimize the oil-water separation performance of the superhydrophobic porous materials by tuning the pore size, thus presenting promising applications.

Design of an interface heating device based on polydivinylbenzene/SiO2/Bi2WO6 and its visible light response performance for water purification

Environmental pollution and the shortage of drinking water are the challenges that mankind is facing. Solar interface evaporation technology has been demonstrated as an important method for producing clean water, but its application to sewage still faces problems, mainly manifested in solubility and oily pollutants. Therefore, an evaporator device contains a superhydrophobic Bi₂WO₆ felt floating layer, a filter paper hydrophilic layer, and a copper foam/CuO photothermal layer, of which the water contact angle of the superhydrophobic felt can reach 159°. The floating layer not only has the ability to adsorb n-hexane but the Rh B degradation can also be realized under indoor/outdoor light conditions. The carrier life of Bi₂WO₆ is 28.8 ns. A copper foam/CuO photothermal layer prepared through a low-temperature treatment is combined with the floating and hydrophilic layer to obtain an evaporation rate of 1.53 kg m^-2 h^-1.