Suppression and dissolution of amyloid aggregates using ionic liquids

Machine Learning-Guided Adaptive Parametrization for Coupling Terms in a Mixed United-Atom/Coarse-Grained Model for Diphenylalanine Self-Assembly in Aqueous Ionic Liquids

Precise regulation of the peptide self-assembly into ordered nanostructures with intriguing properties has attracted intense attention. However, predicting peptide assembly at atomic resolution is a challenge due to both the structural flexibility of peptides and the associated huge computational costs. A machine learning-guided adaptive parametrization method was proposed for developing a mixed atomic and coarse-grained (CG) model through a multiobjective optimization strategy. Our model incorporates the united-atom (UA) model for diphenylalanine (P) and the polarizable electrostatic-variable coarse-grained (VaCG) model for aqueous ionic liquid [BMIM]+[BF4]- solution. In this mixed model, the coupling van der Waals (vdW) interaction is addressed by introducing virtual sites (VS) in the UA model to interact with solvent CG beads. The coupling parameters, including the electrostatic parameter and vdW parameters, are automatically optimized through ML-guided adaptive parametrization. The performance of this model was tested by some microstructural properties, e.g., the average number of P-P intermolecular hydrogen bonds (HBs) and radius distribution functions (RDFs) between P and different fragments of IL, in comparison with all-atom (AA) simulations. The computational cost is significantly reduced using such a parametrization scheme, which could search tens of thousands of force-field parameter sets, while needing only a small fraction of them to be assessed with molecular dynamics (MD) simulations. We used such a mixed resolution model to investigate the self-assembly in IL-water mixtures with variants of IL concentration (X). The long-range-ordered fibril structure is formed in a pure water system (X = 0). With an increase of IL concentrations, the formation of an ordered self-assembly nanostructure is prohibited, instead forming branched fibril at X = 2 mol % or amorphous aggregates when X > 10 mol %, resulting from the interplay between π-stacking and HB interactions between P and IL. The qualitative agreement between the simulated structures and the observed morphologies in experiments indicates the applicability of ML-guided parametrization strategy in the study of complex systems, such as polymers, lipid bilayers, and polysaccharides.

Ionic Liquids Assisted Topical Drug Delivery for Permeation Enhancement: Formulation Strategies, Biomedical Applications, and Toxicological Perspective

Topical drug delivery provides several benefits over other conventional routes by providing localizing therapeutic effects and also avoids the gastrointestinal tract circumventing the first-pass metabolism and enzymatic drug degradation. Being painless, the topical route also prevents the difficulties linked with the parenteral route. However, there are limitations to the current topical systems which necessitate the need for further research to find functional excipients to overcome these limitations. This review deals in depth with the ionic liquids concerning their physicochemical properties and applicability as well as their role in the arena of topical drug delivery in permeation enhancement, bioavailability enhancement of the drugs by solvation, and drug moiety modification. The review gives a detailed insight into the recent literature on ionic liquid-based topical formulations like ionic liquid-based emulsions, active pharmaceutical ingredient-ionic liquids, ionic liquid-based bacterial cellulose membranes, topical small interfering RNA (siRNA) delivery, and ionogels as a possible solutions for overcoming the challenges associated with the topical route. This review also takes into account the toxicological aspects and biomedical applications of ionic liquids.

Role of ionic liquids on stabilization of therapeutic proteins and model proteins

Ionic liquids (ILs) exhibit potential as excipients to stabilize proteins in solutions. This mini-review is not a detailed reference book on ILs, rather a brief overview of the main achievements published in the literature on their effect on protein aggregation, unfolding, structural and thermal stability, and activity. The main focus of the manuscript is three widely studied groups of ionic liquids: imidazolium-, cholinium- and alkylammonium-based and their effect on the model and therapeutic proteins.

Effect of Thiouronium-Based Ionic Liquids on the Formation and Growth of CO2 (sI) and THF (sII) Hydrates

In this manuscript, two thiouronium-based ionic liquids (ILs), namely 2-ethylthiouronium bromide [C₂th][Br] and 2-(hydroxyethyl)thiouronium bromide [C₂OHth][Br], were tested at different concentrations (1 and 10 wt%) for their ability to affect CO₂ (sI) and tetrahydrofuran (THF) (sII) hydrate formation and growth. Two different methods were selected to perform a thermodynamic and kinetic screening of the CO₂ hydrates using a rocking cell apparatus: (i) an isochoric pressure search method to map the hydrate phase behavior and (ii) a constant ramping method to obtain the hydrate formation and dissociation onset temperatures. A THF hydrate crystal growth method was also used to determine the effectiveness of the ILs in altering the growth of type sII hydrates at atmospheric pressure. Hydrate–liquid–vapor equilibrium measurements revealed that both ILs act as thermodynamic inhibitors at 10 wt% and suppress the CO₂ hydrate equilibria ~1.2 °C. The constant ramping methodology provides interesting results and reveals that [C₂OHth][Br] suppresses the nucleation onset temperature and delays the decomposition onset temperatures of CO₂ hydrates at 1 wt%, whereas suppression by [C₂th][Br] was not statistically significant. Normalized pressure plots indicate that the presence of the ILs slowed down the growth as well as the decomposition rates of CO₂ hydrates due to the lower quantity of hydrate formed in the presence of 1 wt% ILs. The ILs were also found to be effective in inhibiting the growth of type sII THF hydrates without affecting their morphology. Therefore, the studied thiouronium ILs can be used as potential dual-function hydrate inhibitors. This work also emphasizes the importance of the methods and conditions used to screen an additive for altering hydrate formation and growth.

Protein aggregation and crystallization with ionic liquids: Insights into the influence of solvent properties

Ionic liquids (ILs) have been used in solvents for proteins in many applications, including biotechnology, pharmaceutics, and medicine due to their tunable physicochemical and biological properties. Protein aggregation is often undesirable, and predominantly occurs during bioprocesses, while the aggregation process can be reversible or irreversible and the aggregates formed can be native/non-native and soluble/insoluble. Recent studies have clearly identified key properties of ILs and IL-water mixtures related to protein performance, suggesting the use of the tailorable properties of ILs to inhibit protein aggregation, to promote protein crystallization, and to control protein aggregation pathways. This review discusses the critical properties of IL and IL-water mixtures and presents the latest understanding of the protein aggregation pathways and the development of IL systems that affect or control the protein aggregation process. Through this feature article, we hope to inspire further advances in understanding and new approaches to controlling protein behavior to optimize bioprocesses.

Mechanisms of action of ionic liquids on living cells: the state of the art

Ionic liquids (ILs) are a relatively new class of organic electrolytes composed of an organic cation and either an organic or inorganic anion, whose melting temperature falls around room-temperature. In the last 20 years, the toxicity of ILs towards cells and micro-organisms has been heavily investigated with the main aim to assess the risks associated with their potential use in (industrial) applications, and to develop strategies to design greener ILs. Toxicity, however, is synonym with affinity, and this has stimulated, in turn, a series of biophysical and chemical-physical investigations as well as few biochemical studies focused on the mechanisms of action (MoAs) of ILs, key step in the development of applications in bio-nanomedicine and bio-nanotechnology. This review has the intent to present an overview of the state of the art of the MoAs of ILs, which have been the focus of a limited number of studies but still sufficient enough to provide a first glimpse on the subject. The overall picture that emerges is quite intriguing and shows that ILs interact with cells in a variety of different mechanisms, including alteration of lipid distribution and cell membrane viscoelasticity, disruption of cell and nuclear membranes, mitochondrial permeabilization and dysfunction, generation of reactive oxygen species, chloroplast damage (in plants), alteration of transmembrane and cytoplasmatic proteins/enzyme functions, alteration of signaling pathways, and DNA fragmentation. Together with our earlier review work on the biophysics and chemical-physics of IL-cell membrane interactions (Biophys. Rev. 9:309, 2017), we hope that the present review, focused instead on the biochemical aspects, will stimulate a series of new investigations and discoveries in the still new and interdisciplinary field of "ILs, biomolecules, and cells."

Molecular Dynamics Evaluation of the Effect of Cholinium Phenylalaninate Biocompatible Ionic Liquid on Biomimetic Membranes

Toward the search of sustainable green solvents, choline amino acid ([Ch][AA]) ionic liquids (ILs), mainly derived from renewable feedstocks, have emerged as a promising atoxic alternative to the conventional solvents. Recent studies have shown the remarkably benign nature of cholinium-based ILs against biomimetic phospholipid membranes. However, few of the contemporaneous experimental studies have contradicted the aforesaid ecofriendly nature of these ILs with anions comprising longer alkyl or aromatic tails. Aiming to understand the influence of amino acid side-chain variation in a particular bio-IL on biomembranes, herein, we have evaluated the effect of cholinium phenylalaninate ([Ch][Phe]) IL on the structural stability of homogeneous biomimetic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) lipid bilayers using atomistic molecular dynamics simulations. Although we observe spontaneous intercalation of aromatic rings of [Phe]^- anions in the hydrophobic region of the bilayers, the polar backbone of the anion remains coordinated with the lipid polar part through strong electrostatic and H-bonding interactions. Besides, the [Ch]⁺ cations get accumulated at the lipid-water interface to counter the excess negative charge density. The intercalation of the anionic rings causes significant perturbations in the lipid structural arrangement while still maintaining the bilayer integrity. The quantitative evaluation to probe the deteriorating effect of this bio-IL application establishes anions as the principal component causing the observed structural perturbations. The analysis of the structural properties along with the free energy assessment reveals the higher efficacy of [Ch][Phe] bio-IL to perturb the POPE bilayer structure than the POPC bilayer.

Development of Nanoscale Hybrids from Ionic Liquid-Peptide Amphiphile Assemblies as New Functional Materials

Over the years, ionic liquids (ILs) have gained tremendous importance because of their unique properties and plethora of applications. In this work, we have developed a new nanoscale hybrid gel consisting of 1-ethyl-3-methylimidazolium dimethyl phosphate, [C2mim][dmp], and self-assembled peptide nanoassemblies. The peptide nanoassemblies were formed by self-assembly of a newly synthesized peptide bolaamphiphile bis(N-α-amido-threonine) 1,7 heptane dicarboxylate (ThrC7). Upon mild heating and sonication of the IL and ThrC7 nanoassemblies, ThrC7-IL nanocomposites were formed. We explored the formation of nanohybrids by varying the ratio of IL to ThrC7 assemblies. While at lower IL ratios, a gelatinous matrix was formed, at higher IL ratios, highly ordered multilayered structures were observed by atomic force microscopy (AFM) imaging. The interactions between the ThrC7 nanofibers and [C2mim][dmp] IL were probed by Fourier transform infrared spectroscopy, transmission electron microscopy, and AFM imaging. Differential scanning calorimetry and thermogravimetric analysis showed that the nanohybrids illustrated distinct thermal phase changes due to changes in hydrogen bonding interactions and unfolding of the nanoassemblies. The viscoelastic behavior of the nanohybrids indicated that the materials displayed higher storage modulus upon incorporation of the ThrC7 nanoassemblies when compared to the IL. Furthermore, the nanohybrids were found to adhere to and promote proliferation of human dermal fibroblasts, while cytotoxicity was observed toward MCF-7 breast cancer cells. Thus, for the first time, we have developed peptide-based nanohybrids with an imidazolium-based IL with unique structural properties that may open new avenues for exploring potential biological applications.

On the Secondary Structure of Silk Fibroin Nanoparticles Obtained Using Ionic Liquids: An Infrared Spectroscopy Study

Silk fibroin from Bombyx mori caterpillar is an outstanding biocompatible polymer for the production of biomaterials. Its impressive combination of strength, flexibility, and degradability are related to the protein’s secondary structure, which may be altered during the manufacture of the biomaterial. The present study looks at the silk fibroin secondary structure during nanoparticle production using ionic liquids and high-power ultrasound using novel infrared spectroscopic approaches. The infrared spectrum of silk fibroin fibers shows that they are composed of 58% β-sheet, 9% turns, and 33% irregular and/or turn-like structures. When fibroin was dissolved in ionic liquids, its amide I band resembled that of soluble silk and no β-sheet absorption was detected. Silk fibroin nanoparticles regenerated from the ionic liquid solution exhibited an amide I band that resembled that of the silk fibers but had a reduced β-sheet content and a corresponding higher content of turns, suggesting an incomplete turn-to-sheet transition during the regeneration process. Both the analysis of the experimental infrared spectrum and spectrum calculations suggest a particular type of β-sheet structure that was involved in this deficiency, whereas the two other types of β-sheet structure found in silk fibroin fibers were readily formed.

Crystal structure of a conformational antibody that binds tau oligomers and inhibits pathological seeding by extracts from donors with Alzheimer's disease

Soluble oligomers of aggregated tau accompany the accumulation of insoluble amyloid fibrils, a histological hallmark of Alzheimer disease (AD) and two dozen related neurodegenerative diseases. Both oligomers and fibrils seed the spread of Tau pathology, and by virtue of their low molecular weight and relative solubility, oligomers may be particularly pernicious seeds. Here, we report the formation of in vitro tau oligomers formed by an ionic liquid (IL15). Using IL15-induced recombinant tau oligomers and a dot blot assay, we discovered a mAb (M204) that binds oligomeric tau, but not tau monomers or fibrils. M204 and an engineered single-chain variable fragment (scFv) inhibited seeding by IL15-induced tau oligomers and pathological extracts from donors with AD and chronic traumatic encephalopathy. This finding suggests that M204-scFv targets pathological structures that are formed by tau in neurodegenerative diseases. We found that M204-scFv itself partitions into oligomeric forms that inhibit seeding differently, and crystal structures of the M204-scFv monomer, dimer, and trimer revealed conformational differences that explain differences among these forms in binding and inhibition. The efficiency of M204-scFv antibodies to inhibit the seeding by brain tissue extracts from different donors with tauopathies varied among individuals, indicating the possible existence of distinct amyloid polymorphs. We propose that by binding to oligomers, which are hypothesized to be the earliest seeding-competent species, M204-scFv may have potential as an early-stage diagnostic for AD and tauopathies, and also could guide the development of promising therapeutic antibodies.

Activity and thermal stability of Mycobacterium tuberculosis PE1 and PE2 proteins esterase domain in the presence of aprotic ionic liquids

An ionic liquid (IL) is a salt in which the ions are poorly coordinated, resulting in these solvents being liquid below 100 °C or even at room temperature. ILs generally consist of large sized anions and cations, have certain unique advantageous properties and hence are considered as 'green solvents'. Thermal stability of the α/β-serine hydrolase (SH) domain in PE1 and PE2 proteins of Mycobacterium tuberculosis (M.tb) possessing esterase activity was studied in the presence of aprotic ILs consisting of imidazolium cations and anions. Addition of ILs to an aqueous solution of proteins prevented their unfolding and aggregation at higher temperatures. The thermal denaturation curve of proteins with ILs shifted to higher temperatures compared to the absence of ILs from CD spectra. The remaining activities of PE1/PE2 proteins with 1.4 M [EMIM][BF₄], [EMIM][Cl], [BMIM][BF₄] and [BMIM][Cl] exhibited 100%/100%, 58.96%/58.84%, 78.92%/78.94% and 54.63%/54.92% greater activities, respectively after the heat treatment at 30 °C for 35 min. We conclude that the remaining activities of both proteins are sufficiently maintained after the heat treatment and this depends upon the nature, concentration of ILs, and the thermal incubation time. Specifically, [EMIM][BF₄] and [BMIM][BF₄] exhibit higher thermal stabilization compared to [EMIM][Cl] and [BMIM][Cl].

Conformational dynamics of amyloid-β (16–22) peptide in aqueous ionic liquids

Molecular dynamics simulations of amyloid-β (16–22) peptide dimer in water as well as at two different experimentally studied concentrations of hydrated ionic liquids (ILs), ethylammonium mesylate (EAM), ethylammonium nitrate (EAN), and triethylammonium mesylate (TEAM), were carried out employing an umbrella sampling method. We used the average Ψ angle of the peptide backbone as the reaction coordinate to observe the conformational changes of a peptide dimer. Secondary structural element values were calculated for the peptide dimer along the reaction coordinate to see the transition of the peptide dimer between β-sheet and α-helix conformations. We observe the β-sheet conformation as the global minimum on the free energy surfaces in both EAM and EAN ILs at both the concentrations and at a low concentration of TEAM. However, we observe α-helix conformation as the global minimum at a high concentration of TEAM. Our results are in good correlation with the experimental findings. We calculated the average number of intramolecular and intermolecular hydrogen bonds of α-helix and β-sheet conformations in all solutions, and they are in correlation with the secondary structure element values. To understand the peptide–IL interactions, atom–atom radial distribution functions of cation, anion, and water around amide oxygen and hydrogen atoms were calculated. The solvent-accessible surface area of the peptide dimer was calculated to understand the exposure of the peptide towards the solvent during conformational changes. Finally, van der Waals (vdW) and Coulomb interaction energies were calculated between peptide–cation, peptide–anion, and peptide–water to understand the stability of conformations in different concentrations. We find that the TEA cation has more vdW interaction energy compared to Coulomb interaction energy with peptide in 70% (w/w) TEAM, which mimics a membrane-like environment to induce α-helix conformation rather than β-sheet conformation.

Molecular dynamics simulations of amyloid-β (16–22) peptide dimer at two different experimentally studied concentrations of hydrated ethylammonium mesylate, ethylammonium nitrate, and triethylammonium mesylate were carried out employing an umbrella sampling method.

An Ionic Liquid-Based Sample Preparation Method for Next-Stage Aggregate Proteomic Analysis

A wide variety of proteomic methods have been applied for protein profiling of insoluble aggregates or inclusion bodies deposited in various cells or tissues. However, these are essentially optimized or modified classical protein chemistry techniques using conventional denaturing agents such as formic acid, urea, and sodium dodecyl sulfate (SDS). The use of these denaturants has several shortcomings, including limited solubilization, contamination, and restrictions on absolute sample quantity and throughput. Here, we describe an alternative proteomic sample preparation platform for widespread aggregation analysis. This approach combines two techniques, (1) the use of ionic liquid for protein solubilization and (2) the recently published microbead-based and organic-media-assisted proteolysis strategy (BOPs), into a single-tube workflow. We demonstrate that the combined approach (iBOPs) enabled the successful solubilization of heat-aggregated hen egg whites within 10 min and supported sensitive mass spectrometry (MS) analysis. The performance of the iBOPs system surpassed those of conventional detergents and chaotropes. Moreover, this technology enabled ultrasensitive proteomic characterization of protein aggregates deposited in individual Caenorhabditis elegans nematodes. We identified ubiquitin and other molecules as candidate stochastic factors whose accumulation levels varied among aging nematode individuals. The sensitivity and applicability of the present iBOPs make it especially attractive for next-stage aggregate proteomic analysis of various biological processes.

Strategic planning of proteins in ionic liquids: future solvents for the enhanced stability of proteins against multiple stresses

Ionic liquids (ILs) present a vast number of solvents capable of replacing toxic organic solvents in chemical, biotechnology and biomedical applications. ILs are inexpensive and environmentally friendly as the materials can be recycled conveniently. Chemists use a variety of cation and anion combinations to produce an IL that fits the requirements of the sustainable future through the pursuit of greener chemical processes. As such, the development of various types of ILs has been recognized as the emergence of environmentally friendly solvents to attain enhanced protein stability in vitro. The literature survey reveals that there exist a large number of scholarly articles as well as elegant reviews on protein stability in ILs. Biomolecules have adapted to antagonistic environmental stresses that normally denature proteins, and the mechanism of adaptation that protects the cellular components against denaturation involves the intracellular concentration of co-solvents. In this regard, recent experimental results distinctly demonstrated that ILs are stabilizing proteins against denaturing stresses, and their presence in the cells does not alter protein functional activities. However, a review focusing particularly on the refolding and counteracting effects of the ILs against denatured proteins by multiple stresses is still missing. This perspective unveils the studies that have been conducted to improve protein stabilities with ILs as well as the refolding and counteracting abilities of these ILs against the denatured proteins under the influence of multiple stresses. We believe that ILs can provide significant environmental and economic advantages for biochemical processes in the near future. Essentially, numerous investigations are required to allow us to further explore the stabilizing properties of ILs over proteins.

Ionic Liquids as Potential and Synergistic Permeation Enhancers for Transdermal Drug Delivery

Transdermal drug delivery systems (TDDS) show clear advantages over conventional routes of drug administration. Nonetheless, there are limitations to current TDDS which warrant further research to improve current TDD platforms. Spurred by the synthesis of novel biodegradable ionic liquids (ILs) and favorable cytotoxicity studies, ILs were shown to be a possible solution to overcome these challenges. Their favorable application in overcoming challenges ranging from synthesis, manufacture, and even therapeutic benefits were documented. In this review, said ILs are highlighted and their role in TDDS is reviewed in terms of (a) ILs as permeation enhancers (single agents or combined), (b) ILs in drug modification, and (c) ILs as active pharmaceutical ingredients. Furthermore, future combination of ILs with other chemical permeation enhancers (CPEs) is proposed and discussed.

Dissolution of Amyloid Aggregates in Aqueous Ionic Liquid Solutions: A Case Study of Insulin Amyloid

Dissolution of amyloid aggregates with high β-sheet content is required for the correct refolding of ordered protein aggregates. The dissolution of bovine insulin amyloid aggregates in five different ionic liquids (ILs) is investigated. These were comprised of three 1-butyl-3-methylimidazolium ([bmim])-based ILs, containing either SCN−, NO3−, or Cl− anions, and two alkylammonium nitrate-based ILs, ethyl- and propylammonium nitrate (EAN and PAN). A broad IL concentration range (x=0–30mol-% IL) was analysed using FTIR spectroscopy combined with the Congo red assay. On the whole, the [bmim]-based ILs showed a higher dissolution ability than EAN and PAN for all concentrations of x. It is notable that the dissolution ability of dilute aqueous IL solutions (x<15) for insulin amyloid was different to that of concentrated aqueous IL solutions (x>15). The former condition for insulin amyloid may affect dissolution based on the denaturant effect of cations and anions in the ILs. The latter condition may affect this dissolution based on the hydrogen-bonding ability (α and β values) of the ILs, as described by the Kamlet–Taft parameters. Moreover, the difference between these α and β values (α–β) was found to be a good indicator of the dissolution ability of ILs for insulin amyloid aggregates in concentrated conditions above x=20 (α–β<0, strong dissolution ability; α–β>0, weak dissolution ability). These findings may assist the future design of aqueous IL-based dissolution agents for ordered aggregated proteins.

Reorientation dynamics and ion diffusivity of neat dimethylimidazolium dimethylphosphate probed by NMR spectroscopy

NMR spectroscopy at two magnetic field strengths was employed to investigate the dynamics of dimethylimidazolium dimethylphosphate ([C₁C₁IM][(CH₃)₂PO₄]). [C₁C₁IM][(CH₃)₂PO₄] is a low-melting, halogen-free ionic liquid comprising of only methyl groups. ¹³C spin–lattice relaxation rates as well as self-diffusion coefficients were measured for [C₁C₁IM][(CH₃)₂PO₄] as a function of temperature. The rotational correlation times, τ_c, for the cation and the anion were obtained from the ¹³C spin–lattice relaxation rates. Although from a theoretical point of view cations and anions are similar in size, they show different reorientation mobilities and diffusivities. The self-diffusion coefficients and the rotational correlation times were related to the radii of the diffusing spheres. The analysis reveals that the radii of the cation and the anion, respectively, are different from each other but constant at temperatures ranging from 293 to 353 K. The experimental results are rationalised by a discrete and individual cation and anion diffusion. The [(CH₃)₂PO₄]⁻ anion reorients faster compared to the cation but diffuses significantly slower indicating the formation of anionic aggregates. Relaxation data were acquired with standard liquid and magic-angle-spinning NMR probes to estimate residual dipolar interactions, chemical shift anisotropy or differences in magnetic susceptibility within the sample.

Liquid and HR-MAS NMR spectroscopy at two magnetic field strengths was employed to investigate the dynamics of ([C₁C₁IM][(CH₃)₂PO₄]).