Hydrothermal Synthesis of Cu-ZnO-/TiO2-Based Engineered Nanomaterials for the Efficient Removal of Organic Pollutants and Bacteria from Water

CdSe Quantum Dots Bedecked on ZnO/TiO2/CuO Ternary Nanocomposite for Enhanced Photocatalytic and Photovoltaic Applications

Herein, we synthesized a CdSe quantum dots (QDs)-decorated ternary metal oxide nanocomposite of ZnO/TiO2/CuO through a simple hydrothermal method. The prepared nanocomposite exhibited monoclinic, hexagonal, and cubic phase structures in XRD (X-ray diffraction) analysis. UV-vis absorbance spectra showed the broad absorption spectrum. SEM (scanning electron microscopy) clearly showed the presence of nanoparticles and confirmed the elements through elemental mapping. TEM (transmission electron microscopy) confirmed the nanostructure of metal oxides decorated with QDs. The average particle size was 45 nm for metal oxides and 7 nm for QDs. XPS (X-ray photoelectron spectroscopy) also confirmed the surface elemental composition. The prepared nanocomposites were introduced as photoanodes in DSSCs (dye-sensitized solar cells) and as photocatalysts for industrial dye solution. Among these samples, CdSe@CuO/TiO2/ZnO showed an improved performance of PCE (photon conversion efficiency) of 3.68% in DSSC and 96% photocatalytic degradation efficiency. It showed a recycling efficiency of ∼92% after 4 cycles against methylene blue (MB) organic dye under visible light irradiation.

Elaborate tree-like Cu-Ag clusters from green electrodeposition for efficiently electrocatalyzing CO2 conversion into syngas

The electrocatalytic carbon dioxide reduction (CO2RR) is one of the emerging technologies that can effectively transform carbon dioxide (CO2) into valuable products. Electrocatalysts deriving from green synthesis methods will significantly help to establish a new green carbon cycle. Herein, a green electrodeposition method without additional reducing agents was used to synthesize Cu-Ag bimetallic catalysts, and it is shown that the combination of Cu and Ag obviously affects the morphology of the Cu-Ag catalysts, resulting in the formation of elaborate tree-like Cu-Ag clusters. An as-deposited Cu-Ag/carbon fiber (Cu-Ag/CF) catalyst exhibits high activity, selectivity and stability toward the CO2RR; in particular, the elaborate dendritic Cu-Ag/CF can efficiently reduce CO2 to syngas with high selectivity (Faradaic efficiency (FE) > 95%) at a low onset potential (-0.5 V). This work provides a rational strategy to overcome the significantly different reaction capacities during the reduction of Ag+ and Cu2+, leading to the formation of a controlled morphology of Cu-Ag, which is favourable for the design and development of highly efficient Cu or Ag catalysts via green methods for electrocatalyzing the CO2RR.

Hybrid nanostructures exhibiting both photocatalytic and antibacterial activity-a review

The most vital issues of the modern world for a sustainable future are "health" and "the environment." Scientific endeavors to tackle these two major concerns for mankind need serious attention. The photocatalytic activity toward curbing environmental pollution and antibacterial performance toward a healthy society are two directions that have been emphasized for decades. Recently, materials engineering, in their nanodimension, has shown tremendous possibilities to integrate these functionalities within the same materials. In particular, hybrid nanostructures have shown magnificent prospects to combat both crucial challenges. Many researchers are separately engaged in this important field of research but the collective knowledge on this domain which can facilitate them to excel is badly missing. The present article integrates the development of different hybrid nanostructures which exhibit both photocatalytic degradations of environmental pollutants and antibacterial efficiency. Various synthesis techniques of those hybrid nanomaterials have been discussed. Hybrid nanosystems based on several successful materials have been categorically discussed for better insight into the research advancement in this direction. In particular, Ag-based, metal oxides-based, layered carbon material-based, and Mexene- and self-cleaning-based materials have been chosen for detailing their performance as anti-pollutant and antibacterial materials. Those hybrid systems along with some miscellaneous booming nanostructured materials have been discussed comprehensively with their success and limitations toward their bifunctionality as antipollutant and antibacterial agents.

Microbe-Plant Interactions Targeting Metal Stress: New Dimensions for Bioremediation Applications

In the age of industrialization, numerous non-biodegradable pollutants like plastics, HMs, polychlorinated biphenyls, and various agrochemicals are a serious concern. These harmful toxic compounds pose a serious threat to food security because they enter the food chain through agricultural land and water. Physical and chemical techniques are used to remove HMs from contaminated soil. Microbial-metal interaction, a novel but underutilized strategy, might be used to lessen the stress caused by metals on plants. For reclaiming areas with high levels of heavy metal contamination, bioremediation is effective and environmentally friendly. In this study, the mechanism of action of endophytic bacteria that promote plant growth and survival in polluted soils-known as heavy metal-tolerant plant growth-promoting (HMT-PGP) microorganisms-and their function in the control of plant metal stress are examined. Numerous bacterial species, such as Arthrobacter, Bacillus, Burkholderia, Pseudomonas, and Stenotrophomonas, as well as a few fungi, such as Mucor, Talaromyces, Trichoderma, and Archaea, such as Natrialba and Haloferax, have also been identified as potent bioresources for biological clean-up. In this study, we additionally emphasize the role of plant growth-promoting bacteria (PGPB) in supporting the economical and environmentally friendly bioremediation of heavy hazardous metals. This study also emphasizes future potential and constraints, integrated metabolomics approaches, and the use of nanoparticles in microbial bioremediation for HMs.

Nanophotocatalysis for the Removal of Pharmaceutical Residues from Water Bodies: State of Art and Recent Trends

Background:

The occurrence of pharmaceuticals in surface and drinking water is ubiquitous and is a major concern of researchers. These compounds cause a destructive impact on aquatic and terrestrial life forms, and the removal of these compounds from the environment is a challenging issue. Existent conventional wastewater treatment processes are generally inefficacious because of their low degradation efficiency and inadequate techniques associated with the disposal of adsorbed pollutants during comparatively effective methods like the adsorption process.

Remediation Method:

Semiconductor-mediated photocatalysis is an attractive technology for the efficient removal of pharmaceutical compounds. Among various semiconductors, TiO2 and ZnObased photocatalysts gained much interest during the last years because of their efficiency in decomposing and mineralizing the lethal organic pollutants with the utilization of UV-visible light. Incessant efforts are being undertaken for tuning the physicochemical, optical, and electronic properties of these photocatalysts to strengthen their overall photocatalytic performance with good recycling efficiency.

Results:

This review attempts to showcase the recent progress in the rational design and fabrication of nanosized TiO2 and ZnO photocatalysts for the removal of pollutants derived from the pharmaceutical industry and hospital wastes.

Conclusion:

Photocatalysis involving TiO2 and ZnO provides a positive impact on pollution management and could be successfully applied to remove pharmaceuticals from wastewater streams. Structure modifications, the introduction of heteroatoms, and the integration of polymers with these nano photocatalysts offer leapfrogging opportunities for broader applications in the field of photocatalysis.

An approach to the photocatalytic mechanism in the TiO2-nanomaterials microorganism interface for the control of infectious processes

The approach of this timely review considers the current literature that is focused on the interface nanostructure/cell-wall microorganism to understand the annihilation mechanism. Morphological studies use optical and electronic microscopes to determine the physical damage on the cell-wall and the possible cell lysis that confirms the viability and microorganism death. The key parameters of the tailoring the surface of the photoactive nanostructures such as the metal functionalization with bacteriostatic properties, hydrophilicity, textural porosity, morphology and the formation of heterojunction systems, can achieve the effective eradication of the microorganisms under natural conditions, ranging from practical to applications in environment, agriculture, and so on. However, to our knowledge, a comprehensive review of the microorganism/nanomaterial interface approach has rarely been conducted. The final remarks point the ideal photocatalytic way for the effective prevention/eradication of microorganisms, considering the resistance that the microorganism could develop without the appropriate regulatory aspects for human and ecosystem safety.