Effect of Iron Oxide Nanoparticle Shape on Doxorubicin Drug Delivery Toward LNCaP and PC-3 Cell Lines

Targeted Doxorubicin-Loaded Dendronized Gold Nanoparticles

Dendronized nanoparticles, also called nanoparticle-cored dendrimers, combine the advantages of nanoparticles and dendrimers. These very stable and polyvalent nanoparticles can be used for diverse applications. One such application is drug delivery, because the dendrons can enhance the density of the payload. In this report, we describe the design of multifunctional gold nanoparticles (AuNPs) coated with poly(propylene imine) (PPI) dendrons that contain both prostate cancer active targeting and chemotherapeutic drugs. The PPI dendron is a good candidate for the design of drug delivery vehicles because of its ability to induce a proton sponge effect that will enhance lysosomal escape and intracellular therapeutic delivery. The chemotherapeutic drug used is doxorubicin (DOX), and it was linked to the dendron through a hydrazone acid-sensitive bond. Subsequent acidification of the AuNP system to a pH of 4-5 resulted in the release of 140 DOX drugs per nanoparticles. In addition, the PPI dendron was conjugated via "click" chemistry to an EphA2-targeting antibody fragment that has been shown to target prostate cancer cells. In vitro cell viability assays revealed an IC50 of 0.9 nM for the targeted DOX-bearing AuNPs after 48 h incubation with PC3 cells. These results are very promising upon optimization of the system.

Development of handheld induction heaters for magnetic fluid hyperthermia applications andin-vitroevaluation on ovarian and prostate cancer cell lines

Objective:Magnetic fluid hyperthermia (MFH) is a still experimental technique found to have a potential application in the treatment of cancer. The method aims to reach around 41 °C-47 °C in the tumor site by exciting magnetic nanoparticles with an externally applied alternating magnetic field (AMF), where cell death is expected to occur. Applying AMFs with high spatial resolution is still a challenge. The AMFs from current and prospective MFH applicators cover relatively large areas; being not suitable for patients having metallic implants near the treatment area. Thus, there will be a clinical need for smaller magnetic field applicators. To this end, a laparoscopic induction heater (LIH) and a transrectal induction heater (TRIH) were developed.Methods:Miniature 'pancake' coils were wound and inserted into 3D printed enclosures. Ovarian (SKOV-3, A2780) and prostate (PC-3, LNCaP) cancer cell lines were used to evaluate the instruments' capabilities in killing cancer cellsin vitro, using Synomag^®-D nanoparticles as the heat mediators. NIH3T3 normal cell lines were also used with both devices to observe if these cells tolerated the conditions applied.Results:Magnetic field intensities reached by the LIH and TRIH were 42.6 kA m^-1at 326 kHz and 26.3 kA m^-1at 303 kHz, respectively. Temperatures reached in the samples were 41 °C by the LIH and 43 °C by the TRIH. Both instruments successfully accomplished killing cancer cells, with minimal effects on normal cells.Conclusion:This work presents the first line of handheld medical induction heaters and have the potential to be a complement to existing cancer therapies.Significance:These instruments could enable the development of MFH modalities that will facilitate the clinical translation of this thermal treatment.

Biomimetic Nucleation of Metal-Organic Frameworks on Silk Fibroin Nanoparticles for Designing Core-Shell-Structured pH-Responsive Anticancer Drug Carriers

Silk fibroin (SF) is a biomacromolecule that can be assembled into nanostructures and induce biomimetic nucleation of inorganic materials. Zeolitic imidazolate framework-8 (ZIF-8), a metal-organic framework (MOF), can be dissolved selectively under acidic pH. Here, we integrated SF and ZIF-8 to develop novel drug carriers that selectively release drug in the acidic intracellular environment of cancer cells. Specifically, SF was assembled into nanoparticles (SF-NPs), which were then loaded with an antitumor drug, doxorubicin (DOX), to form DSF-NPs. Due to the SF-mediated organization of ZIF-8 precursors such as zinc ions, the DSF-NPs further templated the nucleation of ZIF-8 onto their surface to generate core-shell-structured NPs (termed DSF@Z-NPs) with ZIF-8 as a shell and DSF-NP as a core. We found that the DSF@Z-NPs, highly stable under neutral conditions, could be uptaken by breast cancer cells, release DOX selectively owing to dissolution of ZIF-8 shells in the acidic intracellular environment in a controlled manner, and induce cell apoptosis. We also confirmed that the DSF@Z-NPs could inhibit tumor growth more efficiently to reach a higher survival rate than their controls by inducing cell apoptosis in vivo. Our study suggests that SF and MOF could be combined to design a new type of cancer therapeutics.

Polydopamine Modified Superparamagnetic Iron Oxide Nanoparticles as Multifunctional Nanocarrier for Targeted Prostate Cancer Treatment

Polydopamine (pDA)-modified iron oxide core-shell nanoparticles (IONPs) are developed and designed as nanovectors of drugs. Reactive quinone of pDA enhances the binding efficiency of various biomolecules for targeted delivery. Glutathione disulfide (GSSG), an abundant thiol species in the cytoplasm, was immobilized on the pDA-IONP surface. It serves as a cellular trigger to release the drug from the nanoparticles providing an efficient platform for the drug delivery system. Additionally, GSSG on the surface was further modified to form S-nitrosoglutathione that can act as nitric oxide (NO) donors. These NPs were fully characterized using a transmission electronic microscopy (TEM), thermogravimetric analysis (TGA), dynamic light scattering (DLS), zeta potential, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) and UV-vis spectroscopies. Doxorubicin (DOX) and docetaxel (DTX) are two anticancer drugs, which were loaded onto nanoparticles with respective loading efficiencies of 243 and 223 µmol/g of IONPs, calculated using TGA measurements. DOX release study, using UV-vis spectroscopy, showed a pH responsive behavior, making the elaborated nanocarrier a potential drug delivery system. (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl) -2H-tetrazolium (MTS) and apoptosis assays were performed on PC3 cell lines to evaluate the efficiency of the developed nanocarriers. These nanoparticles thus can prove their worth in cancer treatment on account of their easy access to the site and release of drug in response to changes to internal parameters such as pH, chemicals, etc.

The use of iron oxide magnetic nanospheres and nanocubes for targeted doxorubicin delivery into 4t1 mouse breast carcinoma cells

Magnetic nanoparticles (MNP) are attracting increasing attention as promising materials for the treatment and diagnosis of cancer. The aim of this work was to explore the effect of the magnetic core shape of iron oxide nanoparticles (NP) on the efficiency of doxorubicin delivery into 4T1 cells. Nanospheres (NS) and nanocubes (NC) were synthesized by thermal decomposition of iron (III) oleate. This method of synthesis enables control over the NP shape and size. The NP were hydrophilized using Pluronic F-127. The obtained particles were doped with doxorubicin in a sodium phosphate buffer. The weight fractions of doxorubicin in the NS and NC were 15.22% and 15.44%, respectively. The IC50 of free doxorubicin was 1 μM. The IC50 of doxorubicin-loaded NS and NC were 6.4 μM and 5.5 μM, respectively. Unloaded NP did not exhibit any toxicity towards the cells at a studied range of concentrations between 1.77 mg/l and 227.2 mg/l. Free doxorubicin demonstrated more vigorous accumulation dynamics in 4T1 cells with a tendency to localize in the cell nucleus, whereas doxorubicin loaded onto iron oxide NP was mainly accumulated in the vesicles surrounding the nucleus and was able to enter it only after being incubated with the cells for 2 h. We conclude that doxorubicin loaded onto cubic-shaped NP is delivered into the cell nucleus a little bit more efficiently at early incubation stages in comparison with nanospheres, but the difference is insignificant.

Magnetite-Gold nanohybrids as ideal all-in-one platforms for theranostics

High-quality, 25 nm octahedral-shaped Fe3O4 magnetite nanocrystals are epitaxially grown on 9 nm Au seed nanoparticles using a modified wet-chemical synthesis. These Fe3O4-Au Janus nanoparticles exhibit bulk-like magnetic properties. Due to their high magnetization and octahedral shape, the hybrids show superior in vitro and in vivo T2 relaxivity for magnetic resonance imaging as compared to other types of Fe3O4-Au hybrids and commercial contrast agents. The nanoparticles provide two functional surfaces for theranostic applications. For the first time, Fe3O4-Au hybrids are conjugated with two fluorescent dyes or the combination of drug and dye allowing the simultaneous tracking of the nanoparticle vehicle and the drug cargo in vitro and in vivo. The delivery to tumors and payload release are demonstrated in real time by intravital microscopy. Replacing the dyes by cell-specific molecules and drugs makes the Fe3O4-Au hybrids a unique all-in-one platform for theranostics.