Biogenic Silver Nanoparticles/Hydrogen Peroxide/Ozone: Efficient Degradation of Reactive Blue 19

Garlic Cellulosic Powders with Immobilized AgO and CuO Nanoparticles: Preparation, Characterization of the Nanocomposites, and Application to the Catalytic Degradation of Azo Dyes

Nanomaterials have attracted specific consideration due to their specific characteristics and uses in several promising fields. In the present study, Chondrilla juncea was employed as a biological extract to facilitate the reduction of copper and silver ions within garlic peel powders. The resulting garlic-CuO and garlic-AgO nanocomposites were characterized using several analytical methods including FTIR, TGA/DTG, SEM, TEM, and XRD analyses. The garlic peel exhibited a rough surface. The nanoparticles were evenly dispersed across its surface. The incorporation of CuO and AgO nanoparticles affected the crystal structure of garlic peel. The establishment of CuO and AgO nanoparticles was evidenced by the highest residual mass values observed for the prepared nanocomposites. The thermogravimetric analysis showed that the prepared nanocomposites had lower thermal stability compared with garlic peel powders. The prepared nanocomposites were used for catalytic degradation of naphthol blue black B and calmagite. The decolorization process depended on the quantity of H2O2, initial concentration of azo dyes, duration of contact, and temperature of the bath. The calculated activation energy (Ea) values for the garlic-CuO nanocomposites were found to be 18.44 kJ mol-1 and 23.28 kJ mol-1 for calmagite and naphthol solutions, respectively. However, those calculated for garlic-AgO nanocomposites were found to be 50.01 kJ mol-1 and 12.44 kJ mol-1 for calmagite and naphthol, respectively.

Apoptotic, cytotoxic, antioxidant, and antibacterial activities of biosynthesized silver nanoparticles from nettle leaf

Here, we reported the biosynthesis of silver nanoparticles (AgNPs) using Urtica dioica (nettle) leaf extract as green reducing and capping agents and investigate their anticancer and antibacterial, activity. The Nettle-mediated biosynthesized AgNPs was characterized by UV-Vis a spectrophotometer. Their size, shape and elemental analysis were determined with the using of SEM and TEM. The crystal structure was determined by XRD and the biomolecules responsible for the reduction of Ag⁺ were determined using FTIR analysis. Nettle-mediated biosynthesis AgNPs indicated strong antibacterial activity against pathogenic microorganisms. Again, the antioxidant activity of AgNPs is quite high when compared to ascorbic acid. Anticancer effect of AgNPs, IC₅₀ dose was determined by XTT analysis using MCF-7 cell line and the IC₅₀ value was found to be 0.243 ± 0.014 μg/mL (% w/v).

Synergetic metronidazole removal from aqueous solutions using combination of electro-persulfate process with magnetic Fe3O4@AC nanocomposites: nonlinear fitting of isotherms and kinetic models

The removal of metronidazole (MNZ) from aqueous solutions by the electro-persulfate (EC–PS) process was performed in combination with magnetic Fe3O4@activated carbon (AC) nanocomposite. In the first step, the Fe3O4@AC nanocomposites were synthesized and characterized using energy-dispersive X-ray spectroscopy (XRD), vibrating-sample magnetometer (VSM) and field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), mapping, and Fourier-transform infrared spectroscopy (FTIR) analysis. The effect of Fe3O4@AC, PS and EC processes were studied separately and in combination and finally, the appropriate process for MNZ removal was selected. The effect of key parameters on the EC–Fe3O4@AC–PS process including pH, Fe3O4@AC dosage, initial MNZ concentration, and PS concentration were investigated. Based on the results obtained, the Fe3O4@AC had a good structure. The MNZ removal in EC, PS, Fe3O4@AC, EC–Fe3O4@AC, EC–PS, EC–Fe3O4@AC–NaCl, EC–Fe3O4@AC–PS, and EC–Fe3O4@AC–PS–NaCl processes were 0, 0, 59.68, 62, 68.94, 67.71, 87.23 and 88%, respectively. Due to the low effect of NaCl insertion on the EC–Fe3O4@AC–PS process, it was not added into the reactor and optimum conditions for the EC–Fe3O4@AC–PS process were determined. Under ideal conditions, including MNZ = 40 mg/L, Fe3O4@AC dose = 1 g/L, pH = 3, PS concentration = 1.68 mM, current density (CD) = 0.6 mA/cm2 and time = 80 min, the MNZ removal was 92%. Kinetic study showed that the pseudo-second-order model was compatible with the obtained results. In the isotherm studies, the Langmuir model was the most consistent for the data of the present study, and the Q max for Fe3O4@AC dose from 0.25 to 1 g/L was 332 to 125 mg/g, respectively.

Immobilization of copper oxide nanoparticles onto chitosan biopolymer: Application to the oxidative degradation of Naphthol blue black

In this study, copper oxide nanoparticles, prepared using pistacia vera hull extract, were immobilized onto chitosan. FT-IR spectrum of copper oxide-chitosan exhibited chemical shifting of the main peaks of the biopolymer indicating that hydroxyl and amino groups were reacted with copper oxide nanoparticles. SEM features showed spherical surface and physical stability of the composite. The shifting of the burning temperature in DTA from 278.5 °C to 212.6 °C in the composite proved the interaction between chitosan and copper oxide nanoparticles. The composite was applied for the oxidative degradation of naphthol blue black in the presence of H₂O₂. The change of copper oxide nanoparticles loading, time, dye concentration, temperature, and oxidant dose were studied. The degradation yield reached 86 % (C₀ = 30 mg/L, T=20 °C, H₂O₂ = 8 mL/L). The activation energy (E_a), entropy (ΔS*) and enthalpy (ΔH*) were equal to 45.558 KJ. mol^-1, -116.203 J mol^-1 K^-1 and 42.986 kJ mol^-1, respectively.