The Effect of the Voltage Scan Rate on the Determination of the Oxygen Reduction Activity of Pt/C Fuel Cell Catalyst

Metal-Support Interaction between Titanium Oxynitride and Pt Nanoparticles Enables Efficient Low-Pt-Loaded High-Performance Electrodes at Relevant Oxygen Reduction Reaction Current Densities

In the present work, we report on a synergistic relationship between platinum nanoparticles and a titanium oxynitride support (TiOxNy/C) in the context of oxygen reduction reaction (ORR) catalysis. As demonstrated herein, this composite configuration results in significantly improved electrocatalytic activity toward the ORR relative to platinum dispersed on carbon support (Pt/C) at high overpotentials. Specifically, the ORR performance was assessed under an elevated mass transport regime using the modified floating electrode configuration, which enabled us to pursue the reaction closer to PEMFC-relevant current densities. A comprehensive investigation attributes the ORR performance increase to a strong interaction between platinum and the TiOxNy/C support. In particular, according to the generated strain maps obtained via scanning transmission electron microscopy (STEM), the Pt-TiOxNy/C analogue exhibits a more localized strain in Pt nanoparticles in comparison to that in the Pt/C sample. The altered Pt structure could explain the measured ORR activity trend via the d-band theory, which lowers the platinum surface coverage with ORR intermediates. In terms of the Pt particle size effect, our observation presents an anomaly as the Pt-TiOxNy/C analogue, despite having almost two times smaller nanoparticles (2.9 nm) compared to the Pt/C benchmark (4.8 nm), manifests higher specific activity. This provides a promising strategy to further lower the Pt loading and increase the ECSA without sacrificing the catalytic activity under fuel cell-relevant potentials. Apart from the ORR, the platinum-TiOxNy/C interaction is of a sufficient magnitude not to follow the typical particle size effect also in the context of other reactions such as CO stripping, hydrogen oxidation reaction, and water discharge. The trend for the latter is ascribed to the lower oxophilicity of Pt-based on electrochemical surface coverage analysis. Namely, a lower surface coverage with oxygenated species is found for the Pt-TiOxNy/C analogue. Further insights were provided by performing a detailed STEM characterization via the identical location mode (IL-STEM) in particular, via 4DSTEM acquisition. This disclosed that Pt particles are partially encapsulated within a thin layer of TiOxNy origin.

Bifunctional electrocatalytic reduction performance of nitrogen containing biomass based nanoreactors loaded with Ni nanoparticles for oxygen and carbon dioxide

In the face of increasing energy demand, the approach of transformation that combines energy restructuring and environmental governance has become a popular research direction. As an important part of electrocatalytic reactions for gas molecules, reduction reactions of oxygen (ORR) and carbon dioxide (CO2RR) are very indispensable in the field of energy conversion and storage. However, the non-interchangeability and irreversibility of electrode materials have always been a challenge in electrocatalysis. Hereon, nickel and nitrogen decorated biomass carbon-based materials (Ni/N-BC) has been prepared by high temperature pyrolysis using agricultural waste straw as raw material. Surprisingly, it possesses abundant active sites and specific surface area as a bifunctional electrocatalyst for ORR and CO2RR. The three-dimensional porous cavity structure for the framework of biomass could not only provide a strong anchoring foundation for the active site, but also facilitate the transport and enrichment of reactants around the site. In addition, temperature modulation during the preparation process also optimizes the composition and structure of biomass carbon and nitrogen. Benefit from above structure and morphology advantages, Ni/N-BC-800 exhibits the superior electrocatalytic activity for both ORR and CO2RR simultaneously. More specifically, Ni/N-BC-800 exhibits satisfactory ORR activity in terms of initial potential and half wave potential, while also enables the production of CO under high selective. The research results provide ideas for the development and design of electrode materials and green electrocatalysts, and also expand new applications of agricultural waste in fields such as energy conversion, environmental protection, and resource utilization.

Identifying diffusion limiting current to unravel the intrinsic kinetics of electrode reactions affected by mass transfer at rotating disk electrode

Rotating disk electrode systems are widely used to study the kinetics of electrocatalytic reactions that may suffer from insufficient mass transfer of the reactants. Kinetic current density at certain overpotential calculated by the Koutecky-Levich equation is commonly used as the metrics to evaluate the activity of electrocatalysts. However, it is frequently found that the diffusion limiting current density is not correctly identified in the literatures. Instead of kinetic current density, the measured current density normalized by diffusion limiting current density ( j/ jL) has also been frequently under circumstance where its validity is not justified. By taking oxygen reduction reaction/hydrogen oxidation reaction/hydrogen evolution reaction as examples, we demonstrate that identifying the actual diffusion limiting current density for the same reaction under otherwise identical conditions from the experimental data is essential to accurately deduce kinetic current density. Our analysis reveals that j/ jL is a rough activity metric which can only be used to qualitatively compare the activity trend under conditions that the mass transfer conditions and the roughness factor of the electrode are exactly the same. In addition, if one wants to use j/ jL to compare the intrinsic activity, the concentration overpotential should be eliminated.

Oxygen Reduction Reaction on Polycrystalline Platinum: On the Activity Enhancing Effect of Polyvinylidene Difluoride

There have been several reports concerning the performance improving properties of additives, such as polyvinylidene difluoride (PVDF), to the membrane or electrocatalyst layer of proton exchange membrane fuel cells (PEMFC). However, it is not clear if the observed performance enhancement is due to kinetic, mass transport, or anion blocking effects of the PVDF. In a previous investigation using a thin-film rotating disk electrode (RDE) approach (of decreased complexity as compared to membrane electrode assembly (MEA) tests), a performance increase for the oxygen reduction reaction (ORR) could be confirmed. However, even in RDE measurements, reactant mass transport in the catalyst layer cannot be neglected. Therefore, in the present study, the influence of PVDF is re-examined by coating polycrystalline bulk Pt electrodes by PVDF and measuring ORR activity. The results on polycrystalline bulk Pt indicate that the effects of PVDF on the reaction kinetics and anion adsorption are limited, and that the observed performance increase on high surface area Pt/C most likely is due to an erroneous estimation of the electrochemical active surface area (ECSA) from CO stripping and Hupd.

Tailoring the morphology of Ni–Pt nanocatalysts through the variation of oleylamine and oleic acid: a study on oxygen reduction from synthesis to fuel cell application

Systematic study on the variation of morphology, size and composition of Ni–Pt nanoparticles with higher catalytic activity towards oxygen reduction.

Importance of non-intrinsic platinum dissolution in Pt/C composite fuel cell catalysts

The dissolution of different platinum-based nanoparticles deposited on a commercial high-surface area carbon (HSAC) support in thin catalyst films is investigated using a highly sensitive electrochemical flow cell (EFC) coupled to an inductively coupled plasma mass spectrometer (ICP-MS). The previously reported particle-size-dependent dissolution of Pt is confirmed on selected industrial samples with a mean Pt particle size ranging from 1 to 4.8 nm. This trend is significantly altered when a catalyst is diluted by the addition of HSAC. This indicates that the intrinsic dissolution properties are masked by local oversaturation phenomena, the so-called confinement effect. Furthermore, by replacing the standard HSAC support with a support having an order of magnitude higher specific surface area (a micro- and mesoporous nitrogen-doped high surface area carbon, HSANDC), Pt dissolution is reduced even further. This is due to the so-called non-intrinsic confinement and entrapment effects of the (large amount of) micropores and small mesopores doped with N atoms. The observed more effective Pt re-deposition is presumably induced by local Pt oversaturation and the presence of nitrogen nucleation sites. Overall, our study demonstrates the high importance and beneficial effects of porosity, loading and N doping of the carbon support on the Pt stability in the catalyst layer.

Platinum recycling going green via induced surface potential alteration enabling fast and efficient dissolution

The recycling of precious metals, for example, platinum, is an essential aspect of sustainability for the modern industry and energy sectors. However, due to its resistance to corrosion, platinum-leaching techniques rely on high reagent consumption and hazardous processes, for example, boiling aqua regia; a mixture of concentrated nitric and hydrochloric acid. Here we demonstrate that complete dissolution of metallic platinum can be achieved by induced surface potential alteration, an 'electrode-less' process utilizing alternatively oxidative and reductive gases. This concept for platinum recycling exploits the so-called transient dissolution mechanism, triggered by a repetitive change in platinum surface oxidation state, without using any external electric current or electrodes. The effective performance in non-toxic low-concentrated acid and at room temperature is a strong benefit of this approach, potentially rendering recycling of industrial catalysts, including but not limited to platinum-based systems, more sustainable.