Efficient and Cost-effective Photoelectrochemical Degradation of Dyes in Wastewater over an Exfoliated Graphite-MoO3 Nanocomposite Electrode

Harnessing plasma-generated reactive species for the synthesis of different phases of molybdenum oxide to study adsorption and photocatalytic activity

This study employs plasma-liquid interaction technique to synthesize different phases of molybdenum oxide using air and argon as plasma-forming gases. In situ plasma-generated nitrogen species primarily NO3-/NO2- and hydrogen species (H+) facilitate the reduction of the molybdenum precursor anion (Mo7O24-). The reduced Mo species subsequently reacts with reactive oxygen species, forming MoO6 octahedra, which is the building block of a molybdenum oxide crystal. Varied concentrations of NO3-/NO2- and H+ species in air and argon plasma treatment significantly influence the growth process. Air plasma synthesis yields hexagonal molybdenum oxide microrods, which upon calcination changes its phase to orthorhombic 2D layered structure. Moreover, the argon plasma synthesized sample exhibits a mixed phase of hexagonal and orthorhombic molybdenum oxide due to the heavy argon ion bombardment, inducing material porosity and surface oxygen vacancies. The mixed-phase material exhibits superior adsorption and photo-degradation towards cationic dye compared to the other two phases. The higher photocatalytic performance may be responsible for the extended lifetime of the photo-generated charge carriers possessed by the mixed-phase material. Radical scavenging tests have identified holes and hydroxyl radicals as the key reactive species that take part in the photo-degradation process.

Treatment of real wastewater by photoelectrochemical methods: An overview

An inadequate and inefficient performance ability of conventional methods to remove persistent organic pollutants urges the need of alternative or complementary advanced wastewater treatments methods to ensure the safer reuse of reclaimed water. Photoelectrochemical methods are emerging as promising options among other advanced oxidation processes because of the higher treatment efficiency achieved due to the synergistic effects of combined photochemical and electrolysis reactions. Synergistic effects of integrated photochemical, electrochemical and photoelectrochemical processes not only increase the hydroxyl radical production; an enhancement on the mineralization ability through various side reactions is also achieved. In this review, fundamental reaction mechanisms of different photoelectrochemical methods including photoelectrocatalysis, photo/solar electro-Fenton, photo anodic oxidation, photoelectroperoxone and photocatalytic fuel cell are discussed. Various integrated photochemical, electrochemical and photoelectrochemical processes and their synergistic effects are elaborated. Different reactor configurations along with the positioning of electrodes, photocatalysts and light source of the individual/combined photoelectrochemical treatment systems are discussed. Modified photoanode and cathode materials used in the photoelectrochemical reactors and their performance ability is presented. Photoelectrochemical treatment of real wastewater such as landfill leachate, oil mill, pharmaceutical, textile, and tannery wastewater are reviewed. Hydrogen production efficiency in the photoelectrochemical process is further elaborated. Cost and energy involved in these processes are briefed, but the applicability of photocatalytic fuel cells to reduce the electrical dependence is also summarised. Finally, the use of photoelectrochemical approaches as an alternative for treating soil washing effluents is currently discussed.

Bismuth Molybdate Nanoplates Supported on Reduced Graphene Oxide: An Effective Nanocomposite for the Removal of Naphthalene via Adsorption-Photodegradation

Polycyclic aromatic hydrocarbons are a class of persistent organic water pollutants that raise serious concerns owing to their carcinogenicity and other negative impacts on humans and ecosystems. In this study, Bi2MoO6/reduced graphene oxide (rGO) nanocomposites were designed and prepared for the adsorption-assisted photodegradation of naphthalene molecules in an aqueous medium. The synthesized Bi2MoO6 nanoplates and Bi2MoO6/rGO nanocomposites were characterized by X-ray diffraction, Fourier transform infrared, scanning electron microscopy, high-resolution transmission microscopy, X-ray photoelectron spectroscopy, ultraviolet spectroscopy, Brunauer-Emmett-Teller, and photoluminescence measurements. The photodegradation of naphthalene molecules was observed to assess the photocatalytic characteristics of the samples under visible light. The Bi2MoO6/rGO nanocomposites exhibited significantly improved photocatalytic efficiency compared to pure Bi2MoO6. Among the nanocomposites, those containing 2 wt % rGO showed the best photocatalytic activity. The incorporation of rGO enhanced the visible light absorption and decreased the recombination rate of photogenerated charge carriers. Moreover, a Bi2MoO6/rGO nanocomposite showed excellent reusability for five cycles.

Semiconductor Electrode Materials Applied in Photoelectrocatalytic Wastewater Treatment—an Overview

Industrial sources of environmental pollution generate huge amounts of industrial wastewater containing various recalcitrant organic and inorganic pollutants that are hazardous to the environment. On the other hand, industrial wastewater can be regarded as a prospective source of fresh water, energy, and valuable raw materials. Conventional sewage treatment systems are often not efficient enough for the complete degradation of pollutants and they are characterized by high energy consumption. Moreover, the chemical energy that is stored in the wastewater is wasted. A solution to these problems is an application of photoelectrocatalytic treatment methods, especially when they are coupled with energy generation. The paper presents a general overview of the semiconductor materials applied as photoelectrodes in the treatment of various pollutants. The fundamentals of photoelectrocatalytic reactions and the mechanism of pollutants treatment as well as parameters affecting the treatment process are presented. Examples of different semiconductor photoelectrodes that are applied in treatment processes are described in order to present the strengths and weaknesses of the photoelectrocatalytic treatment of industrial wastewater. This overview is an addition to the existing knowledge with a particular focus on the main experimental conditions employed in the photoelectrocatalytic degradation of various pollutants with the application of semiconductor photoelectrodes.

Hazardous waste treatment technologies

This is a review of the literature published in 2018 on topics related to hazardous waste management in water, soils, sediments, and air. The review covers treatment technologies applying physical, chemical, and biological principles for contaminated water, soils, sediments, and air. PRACTITIONER POINTS: The management of waters, wastewaters, and soils contaminated by various hazardous chemicals including inorganic (e.g., oxyanions, salts, and heavy metals), organic (e.g., halogenated, pharmaceuticals and personal care products, pesticides, and persistent organic chemicals) was reviewed according to the technology applied, namely, physical, chemical and biological methods. Physical methods for the management of hazardous wastes including adsorption, coagulation (conventional and electrochemical), sand filtration, electrosorption (or CDI), electrodialysis, electrokinetics, membrane (RO, NF, MF), photocatalysis, photoelectrochemical oxidation, sonochemical, non-thermal plasma, supercritical fluid, electrochemical oxidation, and electrochemical reduction processes were reviewed. Chemical methods including ozone-based, hydrogen peroxide-based, persulfate-based, Fenton and Fenton-like, and potassium permanganate processes for the management of hazardous were reviewed. Biological methods such as aerobic, anaerobic, bioreactor, constructed wetlands, soil bioremediation and biofilter processes for the management of hazardous wastes, in mode of consortium and pure culture were reviewed.