Preparation of human milk fat analogue by enzymatic interesterification reaction using palm stearin and fish oil

Novel trends and challenges in fat modification of next-generation infant formula: Considering the structure of milk fat globules to improve lipid digestion and metabolism of infants

Differences in the composition and structure of lipid droplets in infant formula (IF) and human milk (HM) can affect the fat digestion of infants, leading to high risk of metabolic diseases during later stages of growth. Recently, interest in simulating HM fat (HMF) has gradually increased due to its beneficial functions for infants. Much research focuses on the simulation of fatty acids and triacylglycerols. Enzymatic combined with new technologies such as carbodiimide coupling immobilization enzymes, solvent-free synthesis, and microbial fermentation can improve the yield of simulated HMF. Furthermore, fat modification in next-generation IF requires attention to the impact on the structure and function of milk fat globules (MFG). This review also summarizes the latest reports on MFG structure simulation, mainly related to the addition method and sequence of membrane components, and other milk processing steps. Although some of the simulated HMF technologies and products have been applied to currently commercially available IF, the cost is still high. Furthermore, understanding the fat decomposition of simulated HMF during digestion and assessing its nutritional effects on infants later in life is also a huge challenge. New process development and more clinical studies are needed to construct and evaluate simulated HMF in the future.

The digestion and absorption characteristics of human milk phospholipid analogs: a combination study between in vitro and in vivo

Phospholipids play a crucial role in the growth and neurodevelopment of infants. Currently, soybean phospholipids (SPLs) are the common phospholipid component in most infant formulas (IFs), which, however, shows an obvious difference with the phospholipid (PL) composition of human milk fat. Therefore, in the present study, human milk phospholipid analogs (HMPAs) were prepared by mimicking the composition of PE, PC, PI, PS, and SM in breast milk phospholipids and the composition of the major fatty acids (C16:0, C18:0, C18:1, and C18:2), and their digestion and absorption characteristics were explored using in vitro and mice models. The prepared HMPA contained 26.48% PE, 24.64% PC, 36.19% SM, 6.35% PI, and 6.32% PS, with 40.51% C16:0, 17.02% C18:0, 29.19% C18:1, and 13.26% C18:2, showing different digestive properties relative to SPL. There was little effect on the physical and chemical properties of HMPA under in vitro gastric conditions. The hydrolysis degree, fatty acids release rate, and average particle size decreasing rate of HMPA was significantly higher than that of SPL during digestion in vitro intestine (P < 0.05), showing better digestive process relative to SPL. In terms of the mice model, HMPA had a higher hydrolysis degree in the intestinal tract. Based on the area under curve (AUC) analysis of serum fatty acids, it was found that despite HMPA being absorbed at a slower rate than SPL, it was absorbed more than SPL. In summary, the digestion and absorption of HMPA were preferred to SPL, and these obtained results might provide a theoretical basis for the development and utilization of HMPA in IF.

An Appraisal on Prominent Industrial and Biotechnological Applications of Bacterial Lipases

Microbial lipases expedite the hydrolysis and synthesis of long-chain acyl esters. They are highly significant commercial biocatalysts to biotechnologists and organic chemists. The market size of lipase is anticipated to reach $590 million by 2023. This is all owing to their versatility in properties, including stability in organic solvents, interfacial activation in micro-aqueous environments, high substrate specificity, and activity in even non-aqueous milieu. Lipases are omnipresent and synthesized by various living organisms, including animals, plants, and microorganisms. Microbial lipases are the preferred choice for industrial applications as they entail low production costs, higher yield independent of seasonal changes, easier purification practices, and are capable of being genetically modified. Microbial lipases are employed in several common industries, namely various food manufactories (dairy, bakery, flavor, and aroma enhancement, etc.), leather tanneries, paper and pulp, textiles, detergents, cosmetics, pharmaceuticals, biodiesel synthesis, bioremediation and waste treatment, and many more. In recent decades, circumspection toward eco-friendly and sustainable energy has led scientists to develop industrial mechanisms with lesser waste/effluent generation, minimal overall energy usage, and biocatalysts that can be synthesized using renewable, low-cost, and unconventional raw materials. However, there are still issues regarding the commercial use of lipases which make industrialists wary and sometimes even switch back to chemical catalysis. Industrially relevant lipase properties must be further optimized, analyzed, and explored to ensure their continuous successful utilization. This review comprehensively describes the general background, structural characteristics, classifications, thermostability, and various roles of bacterial lipases in important industries.

Sources, purification, immobilization and industrial applications of microbial lipases: An overview

Microbial lipase is looking for better attention with the fast growth of enzyme proficiency and other benefits like easy, cost-effective, and reliable manufacturing. Immobilized enzymes can be used repetitively and are incapable to catalyze the reactions in the system continuously. Hydrophobic supports are utilized to immobilize enzymes when the ionic strength is low. This approach allows for the immobilization, purification, stability, and hyperactivation of lipases in a single step. The diffusion of the substrate is more advantageous on hydrophobic supports than on hydrophilic supports in the carrier. These approaches are critical to the immobilization performance of the enzyme. For enzyme immobilization, synthesis provides a higher pH value as well as greater heat stability. Using a mixture of immobilization methods, the binding force between enzymes and the support rises, reducing enzyme leakage. Lipase adsorption produces interfacial activation when it is immobilized on hydrophobic support. As a result, in the immobilization process, this procedure is primarily used for a variety of industrial applications. Microbial sources, immobilization techniques, and industrial applications in the fields of food, flavor, detergent, paper and pulp, pharmaceuticals, biodiesel, derivatives of esters and amino groups, agrochemicals, biosensor applications, cosmetics, perfumery, and bioremediation are all discussed in this review.

Preparation of Human Milk Fat Substitutes: A Review

Human milk is generally regarded as the best choice for infant feeding. Human milk fat (HMF) is one of the most complex natural lipids, with a unique fatty acid composition and distribution and complex lipid composition. Lipid intake in infants not only affects their energy intake but also affects their metabolic mode and overall development. Infant formula is the best substitute for human milk when breastfeeding is not possible. As the main energy source in infant formula, human milk fat substitutes (HMFSs) should have a composition similar to that of HMF in order to meet the nutritional needs of infant growth and development. At present, HMFS preparation mainly focuses on the simulation of fatty acid composition, the application of structured lipids and the addition of milk fat globule membrane (MFGM) supplements. This paper first reviews the composition and structure of HMF, and then the preparation development of structured lipids and MFGM supplements are summarized. Additionally, the evaluation and regulation of HMFSs in infant formula are also presented.

Enzymatic Interesterification of Palm Stearin and Palm Olein Blend Catalyzed by sn-1,3-Specific Lipase: Interesterification Degree, Acyl Migration, and Physical Properties

Acyl migration of fatty acid at sn-2 is often observed alongside enzymatic interesterification (EIE), causing the loss of lipase selectivity toward the acyl group at sn-1,3. In this study, an oil blend consisting of palm stearin (PST) and palm olein (POL) was interesterified via a chemical interesterification (CIE) and enzymatic method using a packed bed reactor. Characterization in terms of the triacylglycerol (TAG) compositions, sn-2 fatty acid distributions, and solid fat content profiles was performed. In comparison to that of CIE fats, EIE fats showed different modification effects on the solid fat content. Under similar reaction conditions, different interesterification degrees (IDs) were obtained according to the various blend ratios. Using the same mass ratio of substrates (POL/PST of 9:1), the EIE reaction time and temperature affected the ID and the change in the fatty acyl group at the sn-2 position. Under the reaction time of 46 min, an ID of 94.41% was acquired, while at 80 °C, the degree of acyl migration at sn-2 was 92.87%. EIE with high acyl migration exhibited a lower crystallization rate than that of EIE with low acyl migration. However, the effect of acyl migration on crystal polymorphism and oxidative stability was insignificant. Outcomes from this study are meaningful for the establishment of a theoretical basis for a controlled positional-specific EIE that is catalyzed by sn-1,3-specific lipase.

Tailoring the Structure of Lipids, Oleogels and Fat Replacers by Different Approaches for Solving the Trans-Fat Issue-A Review

The issue of the adverse effects of trans-fatty acids has become more transparent in recent years due to researched evidence of their link with coronary diseases, obesity or type 2 diabetes. Apart from conventional techniques for lipid structuring, novel nonconventional approaches for the same matter, such as enzymatic interesterification, genetic modification, oleogelation or using components from nonlipid origins such as fat replacers have been proposed, leading to a product with a healthier nutritional profile (low in saturated fats, zero trans fats and high in polyunsaturated fats). However, replacing conventional fat with a structured lipid or with a fat mimetic can alternate some of the technological operations or the food quality impeding consumers' acceptance. In this review, we summarize the research of the different existing methods (including conventional and nonconventional) for tailoring lipids in order to give a concise and critical overview in the field. Specifically, raw materials, methods for their production and the potential of food application, together with the properties of new product formulations, have been discussed. Future perspectives, such as the possibility of bioengineering approaches and the valorization of industrial side streams in the framework of Green Production and Circular Economy in the production of tailored lipids, have been highlighted. Additionally, a schematic diagram classifying conventional and nonconventional techniques is proposed based on the processing steps included in tailored lipid production as a convenient and straightforward tool for research and industry searching for healthy, sustainable and zero trans edible lipid system alternatives.

Milk fat globule membrane in infant nutrition: a dairy industry perspective

This review provides an overview of the composition, structure, and biological activities of milk fat globule membrane (MFGM) compounds with focus on the future application of this compound as a food ingredient. MFGM is a particular component of mammalian milks and is comprised of a tri-layer of polar lipids, glycolipids and proteins. In recent years, MFGM has been extensively studied for the purpose of enhancing the efficacy of infant nutrition formula. For example, infant formulas supplemented with bovine MFGM have shown promising results with regard to neurodevelopment and defense against infections. Components of MFGM have been shown to present several health benefits as the proteins of the membrane have shown antiviral activity and a reduction in the incidence of diarrhea. Moreover, the presence of sphingomyelin, a phospholipid, implies beneficial effects on human health such as enhanced neuronal development in infants and the protection of neonates from bacterial infections. The development of a lipid that is similar to human milk fat would represent a significant advance for the infant formula industry and would offer high technology formulas for those infants that depend on infant formula. The complexity of the structure of MFGM and its nutritional and technological properties is critically examined in this review with a focus on issues relevant to the dairy industry.

Evaluation of enzymatic interesterification in structured triacylglycerols preparation: a concise review and prospect

Enzymatic interesterification (EIE) is one of the emerging technologies in the specialty fats industry. EIE has several advantages over the conventional chemical interesterification method, such that the process has higher flexibility and efficiency, is environmentally friendly and the immobilized enzyme can be recycled besides of the lower requirement for substrate's acid value. The physical properties and nutritional qualities of the fats and oils are modified after EIE, depending on the change in the position of fatty acids on the triacylglycerol (TAG) molecules. Evaluation of the interesterification reaction are important and useful in terms of its technological applications. This paper summarizes the conventional methods and the advancement for evaluating EIE processes, e.g., determination of the change in slip melting points, solid fat contents, TAG with equivalent carbon numbers, and sn-2 fatty acid compositions of the end product. Nonetheless, these methods are not comprehensive because during the EIE process, acyl migration occurs. A novel and convenient evaluation model which is based on the fatty acid distribution on the glycerol-backbone is proposed as a perspective. This model can be employed to monitor the interesterification degree and acyl migration during a regiospecific EIE process, which serves as a reaction rule that can be employed to control and optimize the EIE process, thereby producing structured TAG with desired properties.

Enzymatic modification to produce health-promoting lipids from fish oil, algae and other new omega-3 sources: A review

Lipases are a versatile class of enzymes that have aroused great interest in the food and pharmaceutical industries due to their ability to modify and synthesize new lipids for functional foods. Omega-3 polyunsaturated fatty acids (omega-3 PUFAs), such as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), have shown important biological functions promoting human health, especially in the development and maintenance of brain function and vision. Lipases allow selective production of functional lipids enriched in omega-3 PUFAs and are unique enzymatic tools to improve the natural composition of lipids and provide specific bioactivities. This review comprises recent research trends on the enzymatic production of bioactive, structured lipids with improved nutritional characteristics, using new enzymatic processing technologies in combination with novel raw materials, including microalgal lipids and new seed oils high in omega-3 fatty acids. An extensive number of lipase applications in the synthesis of health-promoting lipids enriched in omega-3 fatty acids by enzymatic modification is reviewed, considering the main advances in recent years for production of ethyl esters, 2-monoacylglycerols and structured triglycerides and phospholipids with omega-3 fatty acids, in order to achieve bioactive lipids as new foods and drugs.

Synthesis, physicochemical properties, and health aspects of structured lipids: A review

Structured lipids (SLs) refer to a new type of functional lipids obtained by chemically, enzymatically, or genetically modifying the composition and/or distribution of fatty acids in the glycerol backbone. Due to the unique physicochemical characteristics and health benefits of SLs (for example, calorie reduction, immune function improvement, and reduction in serum triacylglycerols), there is increasing interest in the research and application of novel SLs in the food industry. The chemical structures and molecular architectures of SLs define mainly their physicochemical properties and nutritional values, which are also affected by the processing conditions. In this regard, this holistic review provides coverage of the latest developments and applications of SLs in terms of synthesis strategies, physicochemical properties, health aspects, and potential food applications. Enzymatic synthesis of SLs particularly with immobilized lipases is presented with a short introduction to the genetic engineering approach. Some physical features such as solid fat content, crystallization and melting behavior, rheology and interfacial properties, as well as oxidative stability are discussed as influenced by chemical structures and processing conditions. Health-related considerations of SLs including their metabolic characteristics, biopolymer-based lipid digestion modulation, and oleogelation of liquid oils are also explored. Finally, potential food applications of SLs are shortly introduced. Major challenges and future trends in the industrial production of SLs, physicochemical properties, and digestion behavior of SLs in complex food systems, as well as further exploration of SL-based oleogels and their food application are also discussed.