Optimization of a green extraction method for the recovery of polyphenols from olive leaf using cyclodextrins and glycerin as co-solvents

Polyvinylimidazole-Based Cryogel as an Efficient Tool for the Capture and Release of Oleuropein in Aqueous Media

A polyvinylimidazole-based cryogel is presented as a pioneering solution for efficient extraction and release of partially water-soluble polyphenols from olive byproducts. Specifically, oleuropein was used as model molecule to evaluate its recovery from water. The material merges the properties of interconnected cryogel structure in adsorbing molecules via fast diffusion flux, with the strong electrostatic interactions acted by imidazole moiety. Such cryogel achieves effective oleuropein binding likely through hydrogen bonding and π-π interactions. Comprehensive assessments of static adsorption kinetics, isotherms, and desorption kinetics underscore the cryogel's efficacy in oleuropein extraction and release, highlighting its pivotal role in valorizing olive wastewater through sustainable biotechnological applications.

Glycerol Extraction of Bioactive Compounds from Thanaka (Hesperethusa crenulata) Bark through LCMS Profiling and Their Antioxidant Properties

Organic solvents are hazardous to human and environmental health. The emergence of interest in finding greener solvents to replace organic solvents has sparked a series of studies in the use of glycerol for extracting bioactive compounds from natural products. In this study, we will first identify the bioactive compounds of glycerol- and nonglycerol-based Thanaka (Hesperethusa crenulata) bark extracts using liquid chromatography-mass spectrometry profiles; then, we will determine their antioxidant capacity, free radical scavenging activity, and total phenolic and flavonoid contents. Thanaka bark powder was extracted using solvents, namely, ethanol (TKE), water (TKW), glycerol (TKG), glycerol/water (1:1, v/v) (TKGW), and glycerol/ethanol (1:1, v/v) (TKGE). Among the five extracts, the extract of TKG has the highest number of bioactive compounds, as well as the highest total flavonoid content. TKGE possessed the highest total phenolic content and highest antioxidant activity shown in azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) and ferric-reducing antioxidant power assays among the five extracts. Overall, glycerol has better efficiency in extracting bioactive compounds from Thanaka bark as compared to ethanol and water. Hence, from the phytochemical content and antioxidant properties of Thanaka extracts, we conclude that glycerol is a good green solvent alternative to replace organic solvents.

Valorization of Olive Leaf Polyphenols by Green Extraction and Selective Adsorption on Biochar Derived from Grapevine Pruning Residues

Given today's increasingly intensive agriculture, one key problem area considers the valorization and reuse of wastes from food and agricultural production with minimal impact on the environment. Due to its physicochemical characteristics, biochar (BC) derived from grapevine pruning residue has shown considerable potential for use as an adsorbent. High-value phytochemicals found in abundance in the olive leaf (OL) can be employed in many different industrial sectors. The potential application of BC in the removal of specific polyphenolic components from OL extracts has been investigated in the present study. Water, as the most available and greenest of solvents, was investigated as to its use in the extraction of polyphenols, which was carried out by comparing maceration, ultrasound-assisted extraction, and microwave-assisted extraction, considering different temperatures and solid-to-liquid (s/l) ratios. The BC adsorption capacity of selected polyphenols was fitted with both the Langmuir and Freundlich isotherm models. The Freundlich model fitted better relative to OL polyphenols adsorption. Oleuropein was the most abundant compound identified in the extracts, obtaining the highest Kf value (20.4 (mg/g) × (L/g)n) and R2 coefficient (0.9715) in the adsorption on the biochar's surface. The optimum conditions in the dosage experiment suggest the use of 0.5 g of BC using 3 g/L extracts, with an exception for oleuropein and hydroxytyrosol, for which the highest biochar dose (2.5 g) performed better. Considering the compounds' concentrations and the BC dose, BC from grapevine pruning residues demonstrated a potential use in the uptake of specific polyphenols from olive leaves, making it a promising adsorbent for such applications.

In situ extraction/encapsulation of olive leaves antioxidants in zein for improved oxidative stability of edible oils

This study presents a sustainable and cost-effective method for preserving the bioactivity of phenolic compounds in olive leaves (OLE) during their application. The extraction and nanoencapsulation of OLE were performed in a single-step process using a rotor-stator system with zein as the encapsulating agent. The nanoprecipitation step was carried out using an aqueous sodium caseinate solution, resulting in spherical particles with an average diameter of about 640 nm, as confirmed by Transmission Electron Microscopy. Thermal characterization showed that the produced nanoparticles were more thermally stable than free OLE until 250 °C, and FTIR spectra indicated effective interaction between the phenolic compounds and zein. Antioxidant activity was evaluated using TBARS, DPPH, ABTS, and FRAP assays, with results showing that encapsulated OLE had lower antioxidant activity than free OLE. The best antioxidant capacity results were determined by TBARS assay, with IC50 results equal to 43 and 103 µgOLE/mL for free and encapsulated OLE, respectively. No anti-inflammatory potential was detected for both samples using the RAW 264.7 model, and only free OLE showed cytotoxic activity against lung cancer and gastric carcinoma. Encapsulated and free OLE were used as antioxidants in soy, palm, and palm kernel oils and compared to BHT using Rancimat. The Schaal Oven Test was also performed, and the PARAFAC chemometric method analyzed the UV-Vis spectra, which revealed high stability of the oil when 300 mg or the nanoparticles were added per kg oil. Results suggested that zein-encapsulated olive leaf antioxidants can improve the oxidative stability of edible oils.

Hydroxypropyl-β-Cyclodextrin-Glycerol-Assisted Extraction of Phenolics from Satureja montana L.: Optimization, Anti-Elastase and Anti-Hyaluronidase Properties of the Extracts

A green method for hydroxypropyl-β-cyclodextrin-glycerol-assisted extraction (HCGAE) of bioactive phenolics from S. montana, Lamiaceae was optimized using Box-Behnken design and response surface methodology and compared conventional water/ethanol-based extraction. The procedure was aimed at obtaining extracts with the maximum content of total phenols (TP), flavonoids (TF), dihydroxycinnamic acids (TDCA), rosmarinic acid (RA), and luteolin 7-O-glucoside (LG). The impact of glycerol content (0–70%), 2-hydroxypropyl-β-cyclodextrin content (0–0.4 mmol), temperature (20–70 °C), herbal material weight (0.3–0.8 g), extraction duration (5–25 min), and ultrasound power (144–720 W) on the extraction efficiency was analyzed. Four extracts with maximum amounts of target phenols, OPT-TP (5.93 mg/mL), OPT-TDCA-RA (4.17 mg/mL and 1.16 mg/mL, respectively), OPT-TF (0.99 mg/mL), and OPT-LG (0.28 mg/mL) were prepared. Comparison of the content of TDCA, TF, RA, and LG with those obtained in water/ethanol-based extraction demonstrated the superiority of the HCGAE approach for the extraction of phenols from S. montana. The extracts displayed good anti-elastase and excellent anti-hyaluronidase activity. IC50 values of the anti-hyaluronidase activity (1.67 ± 0.06 μL extract/mL, 1.16 ± 0.08 μL extract/mL, 0.85 ± 0.03 μL extract/mL, and 0.79 ± 0.05 μL extract/mL for OPT-TP, OPT-TDCA-RA, OPT-TF, and OPT-LG, respectively) surpassed that of the applied positive control, tannic acid. The observed bioactivity of the optimized extracts makes them promising active ingredients for natural cosmetics. The results of this research indicate that HCGAE is an excellent alternative to conventional water/ethanol-based extraction of phenolics from Satureja montana L.-yielding extracts with potent anti-elastase and anti-hyaluronidase properties suitable for direct use in cosmetic products.

Stability of natural food colorants derived from onion leaf wastes

Plant anthocyanins have widely been employed as natural food colorants. However, their instability restricts many of their applications in food industry. In this study, anthocyanins were extracted from onion outer scales, using aqueous solutions with or without added cyclodextrins (CDs). The results indicated that when cyclodextrins were included in the extraction medium, the anthocyanins were stable or even had improved and augmented color intensity upon storage or following thermal and UV-light treatments over a broad pH range (2.0-7.0). FT-IR and UV-Vis spectroscopy measurements confirmed the formation of inclusion complexes between CDs and anthocyanins and the presence of pyranosyl groups (pyranoanthocyanins) upon heating. Overall, the stability of onion anthocyanins under various environmental stresses, often encountered during food processing and storage, indicates that the natural color extract from onion outer scales can be of value as an interesting colorant alternative for food applications.

Influence of the extraction method on the recovery of bioactive phenolic compounds from food industry by-products

Agro-foodindustries generate colossal amounts of non-edible waste and by-products, easily accessible as raw materials for up-cycling active phytochemicals. Phenolic compounds are particularly relevant in this field given their abundance in plant residues and the market interest of their functionalities (e.g. natural antioxidant activity) as part of nutraceutical, cosmetological and biomedical formulations. In "bench-to-bedside" achievements, sample extraction is essential because valorization benefits from matrix desorption and solubilization of targeted phytocompounds. Specifically, the composition and polarity of the extractant, the optimal sample particle size and sample:solvent ratio, as well as pH, pressure and temperature are strategic for the release and stability of mobilized species. On the other hand, current green chemistry environmental rules require extraction approaches that eliminate polluting consumables and reduce energy needs. Thus, the following pages provide an update on advanced technologies for the sustainable and efficient recovery of phenolics from plant matrices.

Extraction of Aloesin from Aloe vera Rind Using Alternative Green Solvents: Process Optimization and Biological Activity Assessment

Simple Summary

Aloesin is a bioactive constituent of Aloe spp. used primarily in cosmetic products. Its recovery from plant materials is affected by several variables that can compromise the process yield and profitability, which is why it is necessary to determine the best processing conditions. This study describes the design and optimization of a method for extraction of aloesin from Aloe vera rind, a leaf part often discarded as a by-product, using the response surface methodology. The effect of the variables time, temperature, solvent composition, and solid/liquid ratio were investigated. Green organic solvents (ethanol, propylene glycol, and glycerol) were used in aqueous mixtures. Aqueous propylene glycol was found to be the most promising solvent for aloesin recovery and a linear increase in extraction yields was verified with the increase in solid/liquid ratio. To assess the bioactivity of the extracts, their ability to inhibit lipid peroxidation and the fungal and bacterial growth, as well as their cytotoxic potential, was tested in vitro. Overall, it was possible to determine the best extraction conditions for aloesin and to better understand the antioxidant and antimicrobial properties of the aloesin-rich extracts, which may be produced and used by the industrial sector.

Abstract

Aloesin is an aromatic chromone with increasing applications in the cosmetic and health food industries. To optimize its extraction from the Aloe vera leaf rind, the independent variables time (10–210 min), temperature (25–95 °C) and organic solvent composition (0–100%, w/w) were combined in a central composite design coupled with response surface methodology. The solvents consisted of binary mixtures of water with ethanol, propylene glycol, or glycerol. The aloesin levels quantified in each extract were used as response for optimization. The theoretical models were fitted to the experimental data, statistically validated, and used to obtain the optimal extraction conditions. Then, a dose–response analysis of the solid/liquid ratio (S/L) was performed under the optimal conditions determined for each alcohol–water system and revealed that a linear improvement in extraction efficiency can be achieved by increasing the S/L ratio by up to 40 g/L. This analysis also allowed to experimentally validate the predictive models. Furthermore, the aloesin-rich extracts revealed antioxidant activity through thiobarbituric acid reactive substances (TBARS) formation inhibition, antimicrobial effects against bacterial and fungal strains, and no toxicity for PLP2 cells. Overall, this study provided optimal extraction conditions for the recovery of aloesin from Aloe vera rind through an eco-friendly extraction process and highlighted its bioactive potential.

Development of Green and Efficient Extraction Methods of Quercetin from Red Onion Scales Wastes Using Factorial Design for Method Optimization: A Comparative Study

Waste resulting from edible plants is considered one of the best sources of valuable phytochemicals. A promising approach for using these appreciated wastes is extracting precious medically important constituents, for example, free quercetin. Two new cost-effective and green extraction methods are introduced in the present study: ultrasound-assisted glycerol extraction (UAGE) and microwave-assisted extraction (MAE). These extraction protocols are optimized using factorial design to define the highest yield of extraction, and HPLC-UV at 370 nm was used as a method of yield analysis. Quercetin remained stable during the whole process in both extraction protocols. A standard addition technique was performed to quantify quercetin in different extracts and eliminate the matrix effect. In UAGE and MAE, extraction yields were 16.55 ± 0.81 and 27.20 ± 1.55 mg/1g from red onion scales on a dry base, respectively. The amount of quercetin extracted using MAE was superior to UAGE in terms of time and yield. A greenness assessment of the offered studies compared to previously published relevant extraction methods was performed using the analytical eco-scale assessment method (ESA) and national environmental methods index (NEMI). MAE showed to be a greener method with a higher ESA score and a greener NEMI pictogram.

Optimization of Glycerol-Water Extraction of Selected Bioactive Compounds from Peppermint and Common Nettle

Current trends in the industry indicate that extraction solvents should conform with the ideals of so-called "green chemistry". Therefore, the objective of the presented study was to optimize the conditions for the extraction of polyphenols, flavonoids and chlorophyll from peppermint leaves (Mentha × piperita L., Lamiaceae) and from common nettle leaves (Urtica dioica L., Urticaceae) via green chemistry. The obtained experimental results were subjected to modelling by means of the multiple regression method, while the optimization of the system was addressed via the application of the desirability function. As a result of the use of glycerol-water systems for the extraction of the tested active compounds from mint leaves and nettle leaves, extracts with higher concentrations of polyphenols, flavonoids and chlorophyll were most often obtained, when compared with the use of classical solvents such as water and ethanol. In this work, we demonstrate that the extraction temperature has significant influence on the concentration of the determined components in the extracts. To obtain the highest values of the analysed parameters, leaves of peppermint should be extracted with glycerol-water mixture at the proportions of 30.5:69.5 at a temperature of 50 °C, while the optimal conditions for the extraction of leaves of common nettle were the glycerol-water proportions of 12.5:87.5 and extraction temperature of 20 °C. Comparing the average percentage differences between the highest values of the analysed parameters obtained in the experiment and the approximated values for various temperatures with the level of desirability, one can note a high correlation that, in the analysed examples, amounted to 0.9681. The study showed that glycerol can be an alternative solvent in the extraction of polyphenols, flavonoids and chlorophyll, replacing, e.g., ethanol-which, for various reasons, cannot always be used.

Green and Non-conventional Extraction of Bioactive Compounds from Olive Leaves: Screening of Novel Natural Deep Eutectic Solvents and Investigation of Process Parameters

ABSTRACT

Olive leaf as an agricultural waste contains valuable bioactive compounds that are mainly used for pharmaceutical and cosmetic industries. Lately the major component, oleuropein, has gained extra attention due to the anti-viral activity against SARS-CoV-2 that causes Coronavirus disease (Covid-19). In this study, extraction of the bioactive compounds from olive leaves was conducted using a non-conventional and green method. New generation green solvents, natural deep eutectic solvents (NADES) were used in combination with ultrasound assisted extraction. Screening of NADES type, temperature, and particle size were investigated using one-pot-at-a-time method while, NADES amount and liquid-to-solid ratio were optimized using experimental design. The results were evaluated in terms of total polyphenol yield (Y_TP), total flavonoid yield (Y_TF) and antiradical activity (A_AR). At the optimized conditions, the highest total polyphenol yield and the highest total flavonoid yield were achieved with choline chloride-fructose-water (CFW) (5:2:5) as 187.31 ± 10.3 mg gallic acid equivalent g^-1 dw and 12.75 ± 0.6 mg apigenin equivalent g^-1 dw, respectively. The extracts were also analyzed for oleuropein, caffeic acid and luteolin contents. The highest amount of oleuropein and caffeic acid were extracted by glucose-fructose-water (GFW) (1:1:11) as 1630.80 mg kg^-1 dw and 112.77 mg kg^-1 dw, respectively.

SUPPLEMENTARY INFORMATION

The online version of this article (10.1007/s12649-021-01411-3) contains supplementary material, which is available to authorized users.

Glycerol and Glycerol-Based Deep Eutectic Mixtures as Emerging Green Solvents for Polyphenol Extraction: The Evidence So Far

The acknowledgement that uncontrolled and excessive use of fossil resources has become a prime concern with regard to environmental deterioration, has shifted the orientation of economies towards the implementation of sustainable routes of production, through the valorization of biomass. Green chemistry plays a key role in this regard, defining the framework of processes that encompass eco-friendly methodologies, which aim at the development of highly efficient production of numerous bioderived chemicals, with minimum environmental aggravation. One of the major concerns of the chemical industry in establishing sustainable routes of production, is the replacement of fossil-derived, volatile solvents, with bio-based benign ones, with low vapor pressure, recyclability, low or no toxicity, availability and low cost. Glycerol is a natural substance, inexpensive and non-toxic, and it is a principal by-product of biodiesel industry resulting from the transesterification process. The ever-growing market of biodiesel has created a significant surplus of glycerol production, resulting in a concomitant drop of its price. Thus, glycerol has become a highly available, low-cost liquid, and over the past decade its use as an alternative solvent has been gaining unprecedented attention. This review summarizes the utilization of glycerol and glycerol-based deep eutectic mixtures as emerging solvents with outstanding prospect in bioactive polyphenol extraction.

Cellular Antioxidant Activity of Olive Pomace Extracts: Impact of Gastrointestinal Digestion and Cyclodextrin Encapsulation

Olive pomace is a valuable secondary raw material rich in polyphenols, left behind after the production of olive oil. The present study investigated the protective effect of a polyphenolic extract from olive pomace (OPE) on cell viability and antioxidant defense of cultured human HepG2 cells submitted to oxidative stress induced by tert-butylhydroperoxide (tBOOH). The investigation considered possible matrix effects, impact of gastrointestinal digestion and cyclodextrin (CD) encapsulation. Pre-treatment of cells with OPE prevented cell damage and increased intracellular glutathione but did not affect the activity of glutathione peroxidase and superoxide dismutase. OPE matrix significantly enhanced cell protective effects of major antioxidants, such as hydroxytyrosol (HTS), while cyclodextrin encapsulation enhanced activity of OPE against intracellular reactive oxygen species (ROS) accumulation. The obtained results show that OPE is more potent antioxidant in comparison to equivalent dose of main polyphenols (HTS and TS) and that increasing solubility of OPE polyphenols by CD encapsulation or digestion enhances their potential to act as intracellular antioxidants. Antioxidative protection of cells by OPE was primarily achieved through direct radical-scavenging/reducing actions rather than activation of endogenous defense systems in the cell.

Hydroglycerolic Solvent and Ultrasonication Pretreatment: A Green Blend for High-Efficiency Extraction of Salvia fruticosa Polyphenols

Salvia fruticosa Miller, also known as Cretan or Greek sage, is a medicinal plant with significant biological properties, which are largely ascribed to its polyphenolic composition, but there is to-date a scarcity of green and sustainable processes for efficient polyphenol extraction from this plant. The objective of this study was the implementation of an extraction process that would combine a green solvent based on glycerol, a biodiesel industry by-product, and ultrasonication pretreatment. Ultrasonication for 40 min followed by stirred-tank extraction was shown to provide significantly higher total polyphenol yield than mere stirred-tank extraction, while kinetics indicated 50 °C as the most favorable temperature, with the yield being 92 mg gallic acid equivalents (GAE) per g dry mass. Comparison of this method with a previously developed one that used methyl β-cyclodextrin revealed that the extracts obtained had similar antioxidant activity, and yield in major polyphenols including luteolin 7-O-glucuronide and rosmarinic acid was virtually equal. The current process is proposed as a sustainable and effective methodology for the generation of polyphenol-enriched extracts from S. fruticosa, which could be used as effective food antioxidants/antimicrobials and/or cosmetic constituents.

Glycerol as Alternative Co-Solvent for Water Extraction of Polyphenols from Carménère Pomace: Hot Pressurized Liquid Extraction and Computational Chemistry Calculations

Glycerol is a co-solvent for water extraction that has been shown to be highly effective for obtaining polyphenol extracts under atmospheric conditions. However, its efficacy under subcritical conditions has not yet been studied. We assessed different water-glycerol mixtures (15%, 32.5%, and 50%) in a hot pressurized liquid extraction system (HPLE: 10 MPa) at 90 °C, 120 °C, and 150 °C to obtain extracts of low molecular weight polyphenols from Carménère grape pomace. Under the same extraction conditions, glycerol as a co-solvent achieved significantly higher yields in polyphenols than ethanol. Optimal extraction conditions were 150 °C, with 32.5% glycerol for flavonols and 50% for flavanols, stilbenes, and phenolic acids. Considering gallic acid as a model molecule, computational chemistry calculations were applied to explain some unusual extraction outcomes. Furthermore, glycerol, methanol, ethanol, and ethylene glycol were studied to establish an incipient structure-property relationship. The high extraction yields of gallic acid obtained with water and glycerol solvent mixtures can be explained not only by the additional hydrogen bonds between glycerol and gallic acid as compared with the other alcohols, but also because the third hydroxyl group allows the formation of a three-centered hydrogen bond, which intensifies the strongest glycerol and gallic acid hydrogen bond. The above occurs both in neutral and deprotonated gallic acid. Consequently, glycerol confers to the extraction solvent a higher solvation energy of polyphenols than ethanol.

Eco-Friendly Extraction and Characterisation of Nutraceuticals from Olive Leaves

Olive tree (Olea europaea L.) leaf, a waste by-product of the olive oil industry, is an inexpensive and abundant source of biophenols of great interest for various industrial applications in the food supplement, cosmetic, and pharmaceutical industries. In this work, the aqueous extraction of high-added value compounds from olive leaves by using microfiltered (MF), ultrapure (U), and osmosis-treated (O) water was investigated. The extraction of target compounds, including oleuropein (Olp), hydroxytyrosol (HyTyr), tyrosol (Tyr), verbascoside (Ver), lutein (Lut), and rutin (Rut), was significantly affected by the characteristics of the water used. Indeed, according to the results of liquid chromatography tandem mass spectrometry, the extracting power of microfiltered water towards rutin resulted very poor, while a moderate extraction was observed for oleuropein, verbascoside, and lutein. On the other hand, high concentrations of hydroxytyrosol were detected in the aqueous extracts produced with microfiltered water. The extraction power of ultrapure and osmosis-treated water proved to be very similar for the bio-active compounds oleuropein, verbascoside, lutein, and rutin. The results clearly provide evidence of the possibility of devising new eco-friendly strategies based on the use of green solvents which can be applied to recover bioactive compounds from olive leaves.

Optimization of Bioactive Substances in the Wastes of Some Selective Mediterranean Crops

Production of added products from industrial byproducts is a challenge for the current natural product industry and the extraction field more generally. Therefore, the aim of this study is to valorize the selected Mediterranean crops that can be applied as antioxidants, natural chelating agents, or even as biosolvents or biofuels after special treatment. In this study, the wastes of popular Mediterranean plants were extracted via homogenizer-assisted extraction (HAE) by applying response surface methodology (RSM) to examine the effects of process parameters on the total biophenolic contents (TBCs) of their residues. Box–Behnken design model equations calculated for each system were found significant (p < 0.0001) with an adequate value of determination coefficient (R2). Olive leaf had the highest TBC content (58.62 mg-GAE/g-DW with 0.1 g sample, 42.5% ethanol at 6522.2 rpm for 2 min), followed by mandarin peel (27.79 mg-GAE/g-DW with 0.1 g sample, 34.24% ethanol at 8772 rpm for 1.99 min), grapefruit peel (21.12 mg-GAE/g-DW with 0.1 g sample, 42.33% ethanol at 5000 rpm for 1.125 min) and lemon peel (16.89 mg-GAE/g-DW with 0.1 g sample, 33.62% ethanol at 5007 rpm for 1.282 min). The antioxidant activities of the extracts were measured by several in vitro studies. The most prominent biophenols of the wastes were quantified by high performance liquid chromatography (HPLC). Fourier-transform infrared-attenuated total reflectance (FTIR-ATR) and atomic force microscopy (AFM) techniques were also used for characterization.

Polyphenols in Common Beans (Phaseolus vulgaris L.): Chemistry, Analysis, and Factors Affecting Composition

Common bean (Phaseolus vulgaris L.) is one of the most important grain legumes worldwide. Polyphenols are the predominant bioactive components with multifold bioactivities in diverse common bean cultivars. Phenolic acids, flavonoids, and proanthocyanidins are the main polyphenols in common beans, and colorful common beans are overall rich in polyphenols, mainly in their pigmented seed coats. In addition, factors of influence, such as genotype, environmental conditions, storage, and processing methods, play a critical role in the content and composition of common bean polyphenols. Besides, analytical methods, including extraction, separation, and identification, are of importance for precise and comparable evaluation of polyphenols in common beans. Therefore, in order to provide a comprehensive and updated understanding of polyphenols in common beans, this review first summarizes the content and different compositions of polyphenols in common beans, and next discusses the factors affecting these compositions, followed by introducing the analytical methods for common bean polyphenols, and finally highlights the antioxidant activity of polyphenols in common beans. Considering the recent surge in interest in the use of grain legumes, we hope this review will further stimulate work in this field by providing a blueprint for further analytical studies to better utilize common bean polyphenols in food products to improve human nutrition.

Novel Food Processing and Extraction Technologies of High-Added Value Compounds from Plant Materials

Some functional foods contain biologically active compounds (BAC) that can be derived from various biological sources (fruits, vegetables, medicinal plants, wastes, and by-products). Global food markets demand foods from plant materials that are “safe”, “fresh”, “natural”, and with “nutritional value” while processed in sustainable ways. Functional foods commonly incorporate some plant extract(s) rich with BACs produced by conventional extraction. This approach implies negative thermal influences on extraction yield and quality with a large expenditure of organic solvents and energy. On the other hand, sustainable extractions, such as microwave-assisted extraction (MAE), ultrasound-assisted extraction (UAE), high-pressure assisted extraction (HPAE), high voltage electric discharges assisted extraction (HVED), pulsed electric fields assisted extraction (PEF), supercritical fluids extraction (SFE), and others are aligned with the “green” concepts and able to provide raw materials on industrial scale with optimal expenditure of energy and chemicals. This review provides an overview of relevant innovative food processing and extraction technologies applied to various plant matrices as raw materials for functional foods production.

Natural food colourants derived from onion wastes: application in a yoghurt product

The valorization of onion (Allium cepa) solid wastes, a 450,000 tonnes/year waste in Europe, by a green extraction method is presented. Polyphenols of onion solid wastes were extracted using eco-friendly solvents, such as water and glycerol. The 2-hydroxypropyl-β-cyclodextrin was also used as a co-solvent for the augmentation of the extraction yield. The process has been optimized by implementing a central composite face centered design of experiments, with two replicates in the central point, taking into consideration the following independent variables: glycerol concentration, cyclodextrin concentration and temperature. The assessment of the extraction model was based on two responses: the total pigment yield and the antiradical capacity. LC-MS analysis was also employed in order to identify polyphenols and colourants of the obtained extracts. The main polyphenols found were quercetin and quercetin derivatives and the main colourant was cyanidin 3-O-glucoside. The extract was also tested as a food colourant in a yoghurt matrix. The onion leaf extract was found to be a stable natural colourant and could be utilized as an alternative ingredient to synthetic coloring agents. This article is protected by copyright. All rights reserved.