Influence of different parameters on reverse micelle extraction combined with acetone precipitation to purify sn-1,3 extracellular lipase from Aspergillus niger GZUF36

Novel reaction systems for catalytic synthesis of structured phospholipids

Phospholipids are distinctive, adaptable molecules that are crucial to numerous biological systems. Additionally, their various architectures and amphiphilic characteristics support their unrivaled crucial functions in scientific and industrial applications. Due to their enormous potential for use in the fields of medicine, food, cosmetics, and health, structured phospholipids, which are modified phospholipids, have garnered increased attention. Traditional extraction methods, however, are pricy, resource-intensive, and low-yielding. The process of enzyme-catalyzed conversion is effective for producing several types of structured phospholipase. However, most frequently employed catalytic procedures involve biphasic systems with organic solvents, which have a relatively large mass transfer resistance and are susceptible to solvent residues and environmental effects due to the hydrophobic nature of phospholipids. Therefore, the adoption of innovative, successful, and environmentally friendly enzyme-catalyzed conversion systems provides a new development route in the field of structured phospholipids processing. Several innovative catalytic reaction systems are discussed in this mini-review, including aqueous-solid system, mixed micelle system, water-in-oil microemulsion system, Pickering emulsion system, novel solvent system, three-liquid-phase system, and supercritical carbon dioxide solvent system. However, there is still a glaring need for a thorough examination of these systems for the enzymatic synthesis of structural phospholipids. In terms of the materials utilized, applicability, benefits and drawbacks, and comparative effectiveness of each system, this research establishes further conditions for the system's selection. To create more effective biocatalytic processes, it is still important to build green biocatalytic processes with improved performance. KEY POINTS: • The latest catalytic systems of phospholipase D are thoroughly summarized. • The various systems are contrasted, and their traits are enumerated. • Different catalytic systems' areas of applicability and limitations are discussed.

Purification of fibrinolytic enzyme from Bacillus amyloliquefaciens GUTU06 and properties of the enzyme

A producing-fibrinolytic enzyme strain was isolated with high yield. The strain was identified as Bacillus amyloliquefaciens. B. amyloliquefaciens GUTU06 fibrinolytic enzyme was purified by acetone precipitation and reverse micelle. Acetone precipitation condition and reverse micelle condition were examined. Results showed that the total reverse micelle extraction efficiency was 64.49 % ± 1.6 %. The purification fold of the entire process reached 13.38. The optimum pH of purified enzyme is 5, and the optimum temperature is 45 °C. Fe3+ and K+ can enhance the fibrinolytic activity of the enzyme. Compared to commercial fibrinolytic enzymes such as urokinase and lumbrukinase, GUTU06 fibrinolytic enzymes have a lower pH optimal range and higher temperature stability. The molecular weight of the enzyme was approximately 28 kDa. Reverse micelle extraction with cetyl trimethylammonium bromide as a surfactant combined with acetone precipitation is suitable for separating and purifying fibrinolytic enzymes and a promising technique for obtaining active proteins.

Smartphone-based competitive immunoassay for quantitative on-site detection of meat adulteration

Rapid, sensitive, and portable analytical methods for on-site inspection of food fraud are now an urgent requirement to ensure food quality and satisfy the ethnic considerations of consumers. Hence, for the first time, a colorimetric smartphone-based immunoassay was developed for the on-site detection of pork adulteration in meat. In detail, the immunoassay was based on a competitive strategy in which immobilized standard porcine IgG competed with the target porcine IgG extracted in a single step from meat samples. The parameters involved in each step of the immunoassay conception and the digital colorimetric detection were carefully investigated and optimized. Using polystyrene microplates as ready-to-use stable and portable immunoplatforms, TMB as chromogenic substrate, smartphone as signal readout, and Image J software for image processing; the developed immunoassay was able to detect as low as 0.01% of pork in meat mixtures in a total assay time of 30 min. The selectivity of the immunoassay was evaluated for different meat species, and it was shown to selectively respond only to pork. Furthermore, excellent stability of the prepared immunological platform was demonstrated under extreme temperature conditions (50 °C), which confirms its high portability potential for in situ quantification of pork, while being relatively cost effective and non-laborious. The developed method also provides great precision (RSD < 6%) and accuracy (relative error< 6%). Given the universal use of smartphones as portable and affordable devices, such format of immunoassay could be a promising approach for rapid and sensitive real-time monitoring of food fraud.

Gene Expression, Biochemical Characterization of a sn-1, 3 Extracellular Lipase From Aspergillus niger GZUF36 and Its Model-Structure Analysis

In this study, a sn-1, 3 extracellular lipases from Aspergillus niger GZUF36 (PEXANL1) was expressed in Pichia pastoris, characterized, and the predicted structural model was analyzed. The optimized culture conditions of P. pastoris showed that the highest lipase activity of 66.5 ± 1.4 U/mL (P < 0.05) could be attained with 1% methanol and 96 h induction time. The purified PEXANL1 exhibited the highest activity at pH 4.0 and 40°C temperature, and its original activity remained unaltered in the majority of the organic solvents (20% v/v concentration). Triton X-100, Tween 20, Tween 80, and SDS at a concentration of 0.01% (w/v) enhanced, and all the metal ions tested inhibited activity of purified PEXANL. The results of ultrasound-assisted PEXANL1 catalyzed synthesis of 1,3-diaglycerides showed that the content of 1,3-diglycerides was rapidly increased to 36.90% with 25 min of ultrasound duration (P < 0.05) and later decreased to 19.93% with 35 min of ultrasound duration. The modeled structure of PEXANL1 by comparative modeling showed α/β hydrolase fold. Structural superposition and molecular docking results validated that Ser162, His274, and Asp217 residues of PEXANL1 were involved in the catalysis. Small-angle X-ray scattering analysis indicated the monomer properties of PEXANL1 in solution. The ab initio model of PEXANL1 overlapped with its modeling structure. This work presents a reliable structural model of A. niger lipase based on homology modeling and small-angle X-ray scattering. Besides, the data from this study will benefit the rational design of suitable crystalline lipase variants in the future.

Purification, characterization, and chemical modification of Bacillus velezensis SN-14 fibrinolytic enzyme

Fermented bean foods are a crucial source of fibrinolytic enzymes. The presented study aimed to purify, characterize, and chemically modify Bacillus velezensis SN-14 fibrinolytic enzyme. The fibrinolytic enzyme was purified using CTAB/isooctane/hexyl alcohol/n-butyl alcohol reverse micellar system, and the purified enzyme was chemically modified to improve its enzymatic activity and stability. Enzyme activity recovery and the purification fold for this enzyme were 44.5 ± 1.9% and 4.93 ± 0.05 fold, respectively. SDS-PAGE results showed that the molecular weight of the purified fibrinolytic enzyme was around 28 kDa. Besides, the optimum temperature and pH of the purified fibrinolytic enzyme were 37 °C and 8-9, respectively. Fe²⁺, mPEG5000, and pepsin were used for chemical modification and for improving the activity and stability of the purified enzyme. Thermal and acid-base stability of chemically modified enzymes increased significantly, whereas enzymatic activity increased by 7.3 times. After 30 d of frozen storage, the modified enzyme's activity was remarkably lower (33.2%) than the unmodified enzyme (60.6%). The current study on B. velezensis SN-14 fibrinolytic enzyme and chemical modification method using Fe²⁺, mPEG5000, and pepsin provide a reference for developing fibrinolytic drugs and foods.

Effect of cross-linked enzyme aggregate strategy on characterization of sn-1,3 extracellular lipase from Aspergillus niger GZUF36

The sn-1,3 extracellular lipase from Aspergillus niger GZUF36 (EXANL1) has important potential applications. The cross-linked enzyme aggregate (CLEA) of purified EXANL1 (CLEA-EXANL1) achieved optimum activity recovery (148.5 ± 0.9%), immobilization yield (100 ± 0%), and recovered activity (99.7 ± 0.6%) with 80% tert-butanol as the precipitant, glutaraldehyde (GA) concentration of 30 mM, GA treatment time of 1.5 h, and centrifugal speed of 6000×g. The effect of CLEA strategy on the characterization of EXANL1 was evaluated in this work. CLEA-EXANL1 exhibited a broader optimum pH range (4-6) compared with free EXANL1 (6.5). CLEA-EXANL1 presented optimum activity at 40 °C, which was 5 °C higher than that of free EXANL1. CLEA strategy decreased the maximum reaction rate and increased the Michaelis-Menten constant of EXANL1 when olive oil emulsion was used as a substrate. Moreover, after 30 days, free EXANL1 lost more than 80.0% of its activity, whereas CLEA-EXANL1 retained more than 90.0% of its activity. CLEA strategy improved the tolerance of EXANL1 in polar organic solvents. Fourier transform infrared spectroscopy results showed that the CLEA technique increased the contents of β-sheets and β-turns in EXANL1 and reduced those of α-helixes and irregular crimps. CLEA strategy caused no change in the sn-1,3 selectivity of EXANL1. Therefore, EXANL1 in the form of CLEA is a valuable catalyst in the synthesis of 1,3-diacylglycerol. KEY POINTS: • Cross-linked enzyme aggregate (CLEA) strategy broadened the optimum pH range of sn-1,3 extracellular lipase from Aspergillus niger GZUF36 (EXANL1). • CLEA strategy improved the tolerance of EXANL1 in polar organic solvents. • CLEA strategy caused no change in the positional selectivity of EXANL1.

Microbial lipase production: A deep insight into the recent advances of lipase production and purification techniques

Importance of enzymes is ever-rising particularly microbial lipases holding great industrial worth owing to their potential to catalyze a diverse array of chemical reactions in aqueous as well as nonaqueous settings. International lipase market is anticipated to cross USD 797.7 million till 2025, rising at a 6.2% compound annual growth rate from 2017 to 2025. The recent breakthrough in the field of lipase research is the generation of new and upgraded versions of lipases via molecular strategies. For example, integration of rational enzyme design and directed enzyme evolution to attain desired properties in lipases. Normally, purification of lipase with significant purity is achieved through a multistep procedure. Such multiple step approach of lipase purification entails both conventional and novel techniques. The present review attempts to provide an overview of different aspects of lipase production including fermentation techniques, factors affecting lipase production, and purification strategies, with the aim to assist researchers to pick a suitable technique for the production and purification of lipase.

Gene cloning, expression, purification and characterization of a sn-1,3 extracellular lipase from Aspergillus niger GZUF36

Sn-1,3 extracellular Aspergillus niger GZUF36 lipase (EXANL1) has wide application potential in the food industry. However, the A. niger strain has defects such as easy degradation and instability in the expression of sn-1,3 lipase. To obtain a stable expression of this lipase and its subsequent enzymatic properties, the gene encoding EXANL1 was cloned and expressed in Escherichia coli BL21 (DE3) cells using pET-28a as the expression vector. The temperature-induced conditions were optimized, and we successfully achieved its active expression in E. coli. These conditions significantly influenced the active expression of EXANL1 (P < 0.05), and the highest enzyme activity of the supernatant of lysis cells expressed at 20 °C was at 7.02 ± 0.05 U/mL. The expressed recombinant EXANL1 was purified using Ni-NTA, showing an estimated relative molecular mass of 35 kDa. The recombinant EXANL1 exhibited maximum activity at 35 °C and pH 4.0, with a wide acid pH range. Thin-layer chromatography analysis showed that the enzyme displayed sn-1,3 positional selectivity toward triolein. The recombinant EXANL1 could maintain its relative activities (> 80%) after 24 h of incubation at pH 3-10, suggesting its suitability for a wide range of industrial applications. After comparing these properties with those of the other A. niger lipases, we found that some key amino acids may play a decisive role in enzymology. This work laid a foundation for the stable expression of the EXANL1 gene and its potential industrial application.

Application of experimental designs and response surface methods in screening and optimization of reverse micellar extraction

Reverse micellar extraction (RME) has emerged as a versatile and efficient tool for downstream processing (DSP) of various biomolecules, including structural proteins and enzymes, due to the substantial advantages over conventional DSP methods. However, the RME system is a complex dependency of several parameters that influences the overall selectivity and performance of the RME system, hence this justifies the need for optimization to obtain higher possible extraction results. For the last two decades, many experimental design strategies for screening and optimization of RME have been described in literature. The objective of this article is to review the use of different experimental designs and response surface methodologies that are currently used to screen and optimize the RME system for various types of biomolecules. Overall, this review provides the rationale for the selection of appropriate screening or optimization techniques for the parameters associated with both forward and backward extraction during the RME of biomolecules.