Evaluation of solubility, photostability and antioxidant activity of ellagic acid cyclodextrin nanosponges fabricated by melt method and microwave-assisted synthesis

Sono-assembly of ellagic acid into nanostructures significantly enhances aqueous solubility and bioavailability

INTRODUCTION

Ellagic acid (EA), commonly found in foods, offers significant health benefits in combating chronic diseases. However, its therapeutic potential is hindered by its extremely poor solubility and bioavailability.

METHOD

In this study, EA nanoparticles (EA NPs) were produced using a sono-assembly method, without additional agents.

RESULTS

EA NPs exhibited stick-like nanoparticle structures with an average size of 147.3 ± 0.73 nm. EA NPs likely adopt a tunnel-type solvate structure, with 4 water participating in disruption of intramolecular hydrogen bonds in EA and establishment of intermolecular hydrogen bonds between EAs. Importantly, EA NPs exhibited remarkable enhancements in water solubility, with 120.7-fold increase in water, and 97.8-fold increase in pH 6.8 buffer. Moreover, ex vivo intestinal permeability studies demonstrated significant improvements (P < 0.5). These findings were further supported by in vivo pharmacokinetic studies, where EA NPs significantly enhanced the relative bioavailability of EA by 4.69 times.

Enhancing anti-inflammatory effect of brucine nanohydrogel using rosemary oil: a promising strategy for dermal delivery in arthritic inflammation

Brucine (BRU), an active constituent of Strychnos nux-vomica L., is one of the potential agents to control subside swelling in arthritis. However, its hydrophobic nature, poor permeation, shorter half-life, narrow therapeutic window, and higher toxicity impede its clinical applications. Hence, this investigation was aimed to develop and evaluate novel BRU loaded β-cyclodextrin (β-CD) nanosponges (BRUNs) hydrogel consisting rosemary essential oil (RO), which have been tailored for delayed release, enhanced skin permeation, and reduced irritation, while retaining anti-oxidant and anti-inflammatory activities of this bioactive. Firstly, BRUNs were fabricated by melt technique and characterized appropriately. BRUNs6 demonstrated two fold enhancement in BRU solubility (441.692 ± 38.674) with minimum particle size (322.966 ± 54.456) having good PDI (0.571 ± 0.091) and zeta potential (-14.633 ± 6.357). In vitro release results demonstrated delayed release of BRU from BRUNs6 (67 ± 4.25%) over 24 h through molecular diffusion mechanism. Further, preserved anti-inflammatory (53.343 ± 0.191%) and antioxidant potential (60.269 ± 0.073%) of bioactive was observed in BRUNs6. Hence, this Ns batch was engrossed with Carbopol®934 hydrogel with RO and characterized. In vitro (release and anti-inflammatory activity), ex-vivo (skin permeability) and in vivo (carrageenan-induced inflammation) assays along with irritation study were conducted for fabricated hydrogels. Results revealed that in vitro release of BRU was further delayed from Ns hydrogel with RO (56.45 ± 3.01%) following Fickian mechanism. Considerable enhancement in skin permeability (60.221 ± 0.322 µg/cm2/h) and preservation of anti-inflammatory activity (94.736 ± 2.002%) was also observed in BRUNs6 hydrogel containing RO. The irritation of BRU was found reduced (half) after its entrapped in Ns. Further, as a proof of concept, BRUNs6 hydrogel with RO effectively reduced (75.757 ± 0.944%) carrageenan-induced inflammation in rat model in comparison to pure BRU (54.914 ± 1.081%). Hence, BRUNs hydrogel with RO can be considered as a promising alternative for dermal delivery of BRU in arthritis.

Modification of the Physicochemical Properties of Active Pharmaceutical Ingredients via Lyophilization

Bioavailability is an important biopharmaceutical characteristic of active pharmaceutical ingredients (APIs) that is often correlated with their solubility in water. One of the methods of increasing solubility is freeze drying (lyophilization). The article provides a systematic review of studies published from 2012 to 2022 aimed at optimizing the properties of active pharmaceutical ingredients by freeze drying. This review was carried out in accordance with the recommendations of Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA). In general, 141 modifications of 36 APIs attributed to 12 pharmacological groups were reported in selected publications. To characterize the products of phase modification after lyophilization, a complex of analytical methods was used, including microscopic, thermal, X-ray, and spectral approaches. Solubility and pharmacokinetic parameters were assessed. There is a tendency to increase solubility due to the amorphization of APIs during lyophilization. Thus, the alcohol lyophilizate of dihydroquercetin is "soluble" in water compared to the initial substance belonging to the category "very poorly soluble". Based on the analysis of the literature, it can be argued that lyophilization is a promising method for optimizing the properties of APIs.

Targeted Fisetin-Encapsulated β-Cyclodextrin Nanosponges for Breast Cancer

Fisetin (FS) is considered a safer phytomedicine alternative to conventional chemotherapeutics for breast cancer treatment. Despite its surpassing therapeutic potential, its clinical utility is hampered by its low systemic bioavailability. Accordingly, as far as we are aware, this is the first study to develop lactoferrin-coated FS-loaded β-cyclodextrin nanosponges (LF-FS-NS) for targeted FS delivery to breast cancer. NS formation through cross-linking of β-cyclodextrin by diphenyl carbonate was confirmed by FTIR and XRD. The selected LF-FS-NS showed good colloidal properties (size 52.7 ± 7.2 nm, PDI < 0.3, and ζ-potential 24 mV), high loading efficiency (96 ± 0.3%), and sustained drug release of 26 % after 24 h. Morphological examination using SEM revealed the mesoporous spherical structure of the prepared nanosponges with a pore diameter of ~30 nm, which was further confirmed by surface area measurement. Additionally, LF-FS-NS enhanced FS oral and IP bioavailability (2.5- and 3.2-fold, respectively) compared to FS suspension in rats. Antitumor efficacy evaluation in vitro on MDA-MB-231 cells and in vivo on an Ehrlich ascites mouse model demonstrated significantly higher activity and targetability of LF-FS-NS (30 mg/kg) compared to the free drug and uncoated formulation. Consequently, LF-FS-NS could be addressed as a promising formulation for the effective management of breast cancer.

Formulation Strategies for Enhancing Pharmaceutical and Nutraceutical Potential of Sesamol: A Natural Phenolic Bioactive

Natural plants and their products continue to be the major source of phytoconstituents in food and therapeutics. Scientific studies have evidenced the benefits of sesame oil and its bioactives in various health conditions. Various bioactives present in it include sesamin, sasamolin, sesaminol, and sesamol; among these, sesamol represents a major constituent. This bioactive is responsible for preventing various diseases including cancer, hepatic disorders, cardiac ailments, and neurological diseases. In the last decade, the application of sesamol in the management of various disorders has attracted the increasing interest of the research community. Owing to its prominent pharmacological activities, such as antioxidant, antiinflammatory, antineoplastic, and antimicrobial, sesamol has been explored for the above-mentioned disorders. However, despite the above-mentioned therapeutic potential, its clinical utility is mainly hindered owing to low solubility, stability, bioavailability, and rapid clearance issues. In this regard, numerous strategies have been explored to surpass these restrictions with the formulation of novel carrier platforms. This review aims to describe the various reports and summarize the different pharmacological activities of sesamol. Furthermore, one part of this review is devoted to formulating strategies to improve sesamol's challenges. To resolve the issues such as the stability, low bioavailability, and high systemic clearance of sesamol, novel carrier systems have been developed to open a new avenue to utilize this bioactive as an efficient first-line treatment for various diseases.

Comparative evaluation of dithranol-loaded nanosponges fabricated by solvent evaporation technique and melt method

Background

Dithranol, a standard drug for psoriasis, has lured keen attention by virtue of its antioxidant, anti-proliferative and anti-inflammatory activities. However, its poor stability and solubility critically impair the formulation design, evaluation and administration. To improve these issues, dithranol was encased in β-cyclodextrin nanosponges using solvent evaporation technique. Previously, nanosponges containing dithranol were developed in our laboratory using melt technique. Herein, a comparison of nanosponges prepared by both techniques was also included.

Results

Different nanosponge batches were engineered using diphenyl carbonate as cross-linker with β-cyclodextrin as polymer employing solvent evaporation technique. Dithranol was loaded in nanosponges via lyophilization. Fourier transform infrared spectroscopy, differential scanning colorimeter and powdered X-ray diffraction studies confirmed successful encapsulation and complexation of this drug in β-cyclodextrin nanosponges. The effect of a variable amount of cross-linker on the solubility, encapsulation efficiency, zeta potential, particle size and polydispersity index was evaluated in fabricated nanocarriers. Further, β-cyclodextrin nanosponge batches were subjected to solubility studies, photostability examination and antioxidant activity analysis and compared with previously prepared dithranol-loaded nanosponges. From the present studies results, it was concluded that dithranol-loaded nanosponges using solvent evaporation technique not only improved solubility and photostability but also preserved the antioxidant efficacy of the chosen drug.

Conclusion

The overall results emphasized moral guidance concerning encapsulation, evaluation and characterization and accredited dithranol solubilization, photostability and antioxidant potential. However, solvent evaporation and melt method are easy and promising methods to fabricate nanosponges for dithranol. This comparative study demonstrated the parameters which were affected by chosen techniques. Further, from the results of present studies, it was concluded that the formulation scientists should select the preparation technique based on the objective of their research work and requirement of desired features.

Graphical abstract

Formulation, Characterization, Anti-Inflammatory and Cytotoxicity Study of Sesamol-Laden Nanosponges

Sesamol (SES) possesses remarkable chemotherapeutic activity, owing to its anti-inflammatory and antioxidant potential. However, the activity of SES is mainly hampered by its poor physicochemical properties and stability issues. Hence, to improve the efficacy of this natural anti-inflammatory and cytotoxic agent, it was loaded into β-cyclodextrin nanosponges (NS) prepared using different molar ratios of polymer and crosslinker (diphenyl carbonate). The particle size of SES-laden NS (SES-NS) was shown to be in the nano range (200 to 500 nm), with a low polydispersity index, an adequate charge (-17 to -26 mV), and a high payload. Field emission scanning electron microscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy were used to characterize the bioactive-loaded selected batch (SES-NS6). This batch of nanoformulations showed improved solubilization efficacy (701.88 µg/mL) in comparison to bare SES (244.36 µg/mL), polymer (β-CD) (261.43 µg/mL), and other fabricated batches. The drug release data displayed the controlled release behavior of SES from NS. The findings of the egg albumin denaturation assay revealed the enhanced anti-inflammatory potential of SES-NS as compared to bare SES. Further, the cytotoxicity assay showed that SES-NS was more effective against B16F12 melanoma cell lines than the bioactive alone. The findings of this assay demonstrated a reduction in the IC₅₀ values of SES-NS (67.38 μg/mL) in comparison to SES (106 μg/mL). The present investigation demonstrated the in vitro controlled release pattern and the enhanced anti-inflammatory and cytotoxic activity of SES-NS, suggesting its potential as a promising drug delivery carrier for topical delivery.

Chestnut Wood Mud as a Source of Ellagic Acid for Dermo-Cosmetic Applications

Ellagic acid (EA) has long been recognized as a very active antioxidant, anti-inflammatory, and antimicrobial agent. However, its low bioavailability has often hampered its applications in health-related fields. Here, we report a phospholipid vesicle-based controlled release system for EA, involving the exploitation of chestnut wood mud (CWM), an industrial by-product from chestnut tannin production, as a largely available and low-cost source of this compound. Two kinds of CWM with different particle size distributions, indicated as CWM-A and CWM-B (<100 and 32 µm, respectively), containing 5 ± 1% w/w EA, were incorporated into transfersomes. The latter were small in size (~100 nm), homogeneously dispersed, and negatively charged. 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and ferric reducing/antioxidant power (FRAP) assays indicated up to three-fold improvement in the antioxidant properties of CWM upon incorporation into transfersomes. The kinetics of EA released under simulated physiological conditions were evaluated by UV-Vis spectroscopy and HPLC analysis. The best results were obtained with CWM-B (100% of EA gradually released after 37 days at pH 7.4). A stepwise increase in the antioxidant properties of the released material was also observed. Cell-based experiments confirmed the efficacy of CWM-B transfersomes as antioxidant agents in contrasting photodamage.

Nanosponges for Drug Delivery and Cancer Therapy: Recent Advances

Nanosponges with three-dimensional (3D) porous structures, narrow size distribution, and high entrapment efficiency are widely engineered for cancer therapy and drug delivery purposes. They protect the molecular agents from degradation and help to improve the solubility of lipophilic therapeutic agents/drugs with targeted delivery options in addition to being magnetized to attain suitable magnetic features. Nanosponge-based delivery systems have been applied for cancer therapy with high specificity, biocompatibility, degradability, and prolonged release behavior. In this context, the drug loading within nanosponges is influenced by the crystallization degree. Notably, 3D printing technologies can be applied for the development of novel nanosponge-based systems for biomedical applications. The impacts of polymers, cross-linkers, type of drugs, temperature, loading and mechanism of drug release, fabrication methods, and substitution degree ought to be analytically evaluated. Eco-friendly techniques for the manufacturing of nanosponges still need to be uncovered in addition to the existing methods, such as solvent techniques, ultrasound-assisted preparation, melting strategies, and emulsion solvent diffusion methods. Herein, the recent advancements associated with the drug delivery and cancer therapy potential of nanosponges (chiefly, cyclodextrin-based, DNAzyme, and ethylcellulose nanosponges) are deliberated, focusing on the important challenges and future perspectives.

Cyclodextrin-Based Nanosponges: Overview and Opportunities

Nanosponges are solid cross-linked polymeric nano-sized porous structures. This broad concept involves, among others, metal organic frameworks and hydrogels. The focus of this manuscript is on cyclodextrin-based nanosponges. Cyclodextrins are cyclic oligomers of glucose derived from starch. The combined external hydrophilicity with the internal hydrophobic surface constitute a unique “microenvironment”, that confers cyclodextrins the peculiar ability to form inclusion host‒guest complexes with many hydrophobic substances. These complexes may impart beneficial modifications of the properties of guest molecules such as solubility enhancement and stabilization of labile guests. These properties complemented with the possibility of using different crosslinkers and high polymeric surface, make these sponges highly suitable for a large range of applications. Despite that, in the last 2 decades, cyclodextrin-based nanosponges have been developed for pharmaceutical and biomedical applications, taking advantage of the nontoxicity of cyclodextrins towards humans. This paper provides a critical and timely compilation of the contributions involving cyclodextrins nanosponges for those areas, but also paves the way for other important applications, including water and soil remediation and catalysis.