Novel synthesis of high-thermal stability carbon dots and nanocomposites from oleic acid as an organic substrate

Microwave Synthesis of Carbon Quantum Dots from Arabica Coffee Ground for Fluorescence Detection of Fe3+, Pb2+, and Cr3

In this study, carbon quantum dots (CQDs), which were synthesized from arabica coffee ground-derived activated carbon, have been successfully employed as a fluorescence sensor to detect Fe3+ ions. CQDs were fabricated using microwave heating for 5-10 min, which emitted vibrant blue light at 455 nm when exposed to excitation at 365 nm. Dynamic light scattering (DLS) analysis revealed that the average size of CQDs was 10.12 nm with a quantum yield of 6.01%. Fluorescence detection was developed for sensing Fe3+, Pb2+, and Cr3+ ions. The addition of the three metal ions resulted in a decrease in the fluorescence (FL) intensity of the CQDs, with the addition of Fe3+ ions demonstrating a more significant decrease in FL compared to the addition of both Cr3+ and Pb2+ ions. The results indicated that the CQDs synthesized from activated carbon of arabica coffee waste performed as a selective fluorescent detector for Fe3+ ions, with a detection limit of 0.27 μM.

Designing of chitosan/gelatin based nanocomposite films integrated with Vachellia nilotica gum carbon dots for smart food packaging applications

Microbial growth and exposure to UV light is a persistent global concern resulting in food spoilage, therefore, smart packaging is crucial for the availability of safer and quality food. Present work describes fabrication of chitosan (CH) and gelatin (GL) based nanocomposite films by introducing green source, highly fluorescent Vachillia nilotica gum-derived carbon dots (VNG-CDs). The VNG-CDs and incorporated CH/GL nanocomposite films were characterized by UV-Visible, FTIR, XRD, SEM and TGA analysis. The FTIR and XRD data revealed that VNG-CDs, chitosan, gelatin, and glycerol are combined/interlinked to form homogeneous nanocomposite films. The inclusion of VNG-CDs to CS/GL-CDs nanocomposite film efficiently enhanced the thermal stability and improved mechanical properties. VNG-CDs added to films markedly blocked the ultraviolet light and their effectiveness improved as concentration of CDs increases, being >90 % in UVC (200-280 nm) region. The prepared CS/GL-CDs nanocomposite films manifested radical scavenging activity, reducing capability and also excellently inhibited growth of E. coli, K. pneumonia and S. aureus bacteria. The viability of CS/GL-CDs nanocomposite films examined using banana as a model fruit extending the storage time by two weeks. In conclusion, CH/GL films containing VNG-CDs can be developed into smart packaging materials with enhanced protection and antimicrobial properties.

Carbon Dots and Their Polymeric Nanocomposites: Insight into Their Synthesis, Photoluminescence Mechanisms, and Recent Trends in Sensing Applications

Carbon dots (CDs), a novel class of carbon-based nanoparticles, have received a lot of interest recently due to their exceptional mechanical, chemical, and fluorescent properties, as well as their excellent photostability and biocompatibility. CDs' emission properties have already found a variety of potential applications, in which bioimaging and sensing are major highlights. It is widely acknowledged that CDs' fluorescence and surface conditions are closely linked. However, due to the structural complexity of CDs, the specific underlying process of their fluorescence is uncertain and yet to be explained. Because of their low toxicity, robust and wide optical absorption, high chemical stability, rapid transfer characteristics, and ease of modification, CDs have been recognized as promising carbon nanomaterials for a variety of sensing applications. Thus, following such outstanding properties of CDs, they have been mixed and imprinted onto different polymeric components to achieve a highly efficient nanocomposite with improved functional groups and properties. Here, in this review, various approaches and techniques for the preparation of polymer/CDs nanocomposites have been elaborated along with the individual characteristics of CDs. CDs/polymer nanocomposites recently have been highly demanded for sensor applications. The insights from this review are detailed sensor applications of polymer/CDs nanocomposites especially for detection of different chemical and biological analytes such as metal ions, small organic molecules, and several contaminants.

Exploring antimicrobial and biocompatible applications of eco-friendly fluorescent carbon dots derived from fast-food packaging waste transformation

In the face of escalating environmental concerns, particularly the pervasive issue of non-biodegradable fast-food packaging waste, this study introduces a ground-breaking solution that not only addresses waste management but also advances biomedical technology. Utilizing the underexploited resource of Fucoidan, a sulfated polysaccharide from brown algae, we have innovatively transformed fast-food packaging waste into eco-friendly fluorescent carbon dots (FPCDs). These FPCDs were meticulously characterized through advanced techniques like FT-IR, TEM, and XRD, shedding light on their unique structure, morphology, and composition. A significant discovery of this study is the potent antimicrobial properties of these FPCDs, which demonstrate remarkable effectiveness against specific bacterial and fungal strains. This opens new avenues in the realm of biomedical applications, including imaging, drug delivery, and biosensing. Furthermore, extensive toxicity assessments, including the Brine shrimp lethality assay and Adult Artemia toxicity tests, underscore the safety of these nanoparticles, bolstering their applicability in sensitive medical scenarios. Our research presents a compelling dual approach, ingeniously tackling environmental sustainability issues by repurposing waste while simultaneously creating valuable materials for biomedical use. This dual benefit underscores the transformative potential of our approach, setting a precedent in both waste management and medical innovation.

Stability of carbon quantum dots: a critical review

Carbon quantum dots (CQDs) are fluorescent carbon nanomaterials with unique optical and structural properties that have drawn extensive attention from researchers in the past few decades. Environmental friendliness, biocompatibility and cost effectiveness of CQDs have made them very renowned in countless applications including solar cells, white light-emitting diodes, bio-imaging, chemical sensing, drug delivery, environmental monitoring, electrocatalysis, photocatalysis and other related areas. This review is explicitly dedicated to the stability of CQDs under different ambient conditions. Stability of CQDs is very important for every possible application and no review has been put forth to date that emphasises it, to the best of our knowledge. This review's primary goal is to make the readers cognizant of the importance of stability, ways to assess it, factors that affect it and proposed ways to enhance the stability for making CQDs suitable for commercial applications.

Ligand Decomposition during Nanoparticle Synthesis: Influence of Ligand Structure and Precursor Selection

Aliphatic amine and carboxylic acid ligands are widely used as organic solvents during the bottom-up synthesis of inorganic nanoparticles (NPs). Although the ligands' ability to alter final NP properties has been widely studied, side reactivity of these ligands is emerging as an important mechanism to consider. In this work, we study the thermal decomposition of common ligands with varying functional groups (amines and carboxylic acids) and bond saturations (from saturated to polyunsaturated). Here, we investigate how these ligand properties influence decomposition in the absence and presence of precursors used in NP synthesis. We show that during the synthesis of inorganic chalcogenide NPs (Cu₂ZnSnS₄, Cu _x S, and SnS _x ) with metal acetylacetonate precursors and elemental sulfur, the ligand pyrolyzes, producing alkylated graphitic species. Additionally, there was less to no ligand decomposition observed during the sulfur-free synthesis of ZnO and CuO with metal acetylacetonate precursors. These results will help guide ligand selection for NP syntheses and improve reaction purity, an important factor in many applications.

Multimode Anticounterfeiting Labels Based on a Flexible and Water-Resistant NaGdF4Yb3+,Er3+@Carbon Dots Chiral Fluorescent Cellulose Film

Advanced fluorescent anticounterfeiting technology has attracted a great deal of attention and inspired researchers to develop reliable fluorescent materials with multimodal luminescence. Herein, hydrophobic NaGdF₄:Yb³⁺,Er³⁺ nanoparticles with dual-mode luminescence were prepared through a one-step solvothermal method using oleic acid as a chelating agent and octadecene as a solvent. The as-synthesized sample was found to provide both green upconversion luminescence and blue downconversion luminescence at excitation wavelengths of 365 and 980 nm. The structure and composition analysis showed that the as-obtained samples were spherical NaGdF₄:Yb³⁺,Er³⁺@carbon dots (CDs) with a 14.5 ± 0.2 nm particle size and good dispersity in nonpolar solvents. Subsequently, NaGdF₄:Yb³⁺,Er³⁺@CDs were coated on a cholesteric nanocellulose film with structural color to prepare multimode circularly polarized fluorescent materials. The prepared composite film is flexible and water-resistant, meaning that it is very suitable for anticounterfeiting labels, not only providing a simple and rapid synthesis method with which to prepare multimode fluorescent materials but also presenting a novel anticounterfeiting technology.

One-Step Green Synthesis of Water-Soluble Fluorescent Carbon Dots and Its Application in the Detection of Cu2

Renewable biowaste-derived carbon dots have garnered immense interest owing to their exceptional optical, fluorescence, chemical, and environmentally friendly attributes, which have been exploited for the detection of metals, non-metals, and organics in the environment. In the present study, water-soluble fluorescent carbon dots (CDs) were synthesized via facile green microwave pyrolysis of pine-cone biomass as precursors, without any chemical additives. The synthesized fluorescent pine-cone carbon dots (PC-CDs) were spherical in shape with a bimodal particle-size distribution (average diameters of 15.2 nm and 42.1 nm) and a broad absorption band of between 280 and 350 nm, attributed to a π-π* and n-π* transition. The synthesized PC-CDs exhibited the highest fluorescent (FL) intensity at an excitation wavelength of 360 nm, with maximum emission of 430 nm. The synthesized PC-CDs were an excellent fluorescent probe for the selective detection of Cu2+ in aqueous solution, amidst the presence of other metal ions. The FL intensity of PC-CDs was exceptionally quenched in the presence of Cu2+ ions, with a low detection limit of 0.005 μg/mL; this was largely ascribed to Cu2+ ion binding interactions with the enriched surface functional groups on the PC-CDs. As-synthesized PC-CDs are an excellent, cost effective, and sensitive probe for detecting and monitoring Cu2+ metal ions in wastewater.

Carbon Dot/Polymer Composites with Various Precursors and Their Sensing Applications: A Review

Carbon dots (CDs) have generated much interest because of their significant fluorescence (FL) properties, extraordinary photophysical attributes, and long-term colloidal stability. CDs have been regarded as a prospective carbon nanomaterial for various sensing applications because of their low toxicity, strong and broad optical absorption, high chemical stability, rapid transfer properties, and easy modification. To improve their functionality, CD/polymer composites have been developed by integrating polymers into CDs. CD/polymer composites have diversified because of their easy preparation and applications in sensing, optoelectronics, semiconductors, molecular delivery, and various commercial fields. Many review articles are available regarding the preparation and applications of CDs. Some review articles describing the production and multiple applications of the composites are available. However, no such article has focused on the types of precursors, optical properties, coating characteristics, and specific sensing applications of CD/polymer composites. This review aimed to highlight and summarize the current progress of CD/polymer composites in the last five years (2017–2021). First, we overview the precursors used for deriving CDs and CD/polymer composites, synthesis methods for preparing CDs and CD/polymer composites, and the optical properties (absorbance, FL, emission color, and quantum yield) and coating characteristics of the composites. Most carbon and polymer precursors were dominated by synthetic precursors, with citric acid and polyvinyl alcohol widely utilized as carbon and polymer precursors, respectively. Hydrothermal treatment for CDs and interfacial polymerization for CDs/polymers were frequently performed. The optical properties of CDs and CD/polymer composites were almost identical, denoting that the optical characters of CDs were well-maintained in the composites. Then, the chemical, biological, and physical sensing applications of CD/polymer composites are categorized and discussed. The CD/polymer composites showed good performance as chemical, biological, and physical sensors for numerous targets based on FL quenching efficiency. Finally, remaining challenges and future perspectives for CD/polymer composites are provided.

Construction of stereocomplex granular dams in luminescent biopolymer systems

Lessons from natural and artificial granular dams inspired the design of dam structures of stereocomplex granules in multicolor emissive biopolymer systems.