The effects of calcium–silicate–hydrate (C–S–H) seeds on reference microorganisms

Structural studies of calcium silicate hydrate modified with heavy metal cations

This study investigates the immobilization mechanisms of heavy metal ions in the C-S-H phase. Synthetic C-S-H phases were prepared via the precipitation method, incorporating five different ions (Pb(II), Cd(II), Ni(II), Zn(II), and Cr(III)). Structural analysis of the obtained material was conducted using vibrational spectroscopy (both FT-IR and Raman), X-ray photoelectron spectroscopy, and X-ray diffraction. Spectroscopic methods were primarily employed to evaluate the structural effects and polymerization degree of the resulting C-S-H phase. Morphological changes were characterized using scanning and transmission electron microscopy (SEM and TEM, respectively). Our findings reveal several mechanisms for immobilizing heavy metal cations: precipitation of insoluble compounds (particularly notable for Ni(II) and Cr(III)), replacement of Ca(II) ions within the silicate structure (evident in the crystallization of Ca(OH)2 in samples containing Cd(II), Ni(II), and Zn(II) in minimal quantities), and strong bonding of certain metals (such as Pb(II)) with the C-S-H phase structure. These insights contribute to understanding the potential applications of C-S-H phases in heavy metal immobilization.

Sodium alginate-modified alkali-activated eggshell/Fe3O4 nanoparticles: A magnetic bio-based spherical adsorbent for cationic dyes adsorption

Herein, a mixture of eggshell (ES) and magnetite nanoparticles (MNPs) was alkali-activated using NaOH/Na2SiO3 solution and then, impregnated with sodium alginate (SA) to prepare a magnetic bio-based adsorbent (namely SAAES/SA/MNPs) for the decontamination of water containing basic dyes, in particular, methylene blue (MB) and crystal violet (CV). The physicochemical properties of magnetic spheres of SAAES/SA/MNPs were characterized using XRD, FTIR, FESEM, EDX, elemental mapping, TEM, and zeta potential techniques. Dye adsorption equilibrium was studied experimentally at pH 8.0 and 25-55 °C, and a statistical physics multilayer model was applied to understand the removal mechanism of these dyes including the adsorption orientations on the adsorbent surface. The number of adsorbed dye molecules per functional group (n) of this bio-based adsorbent ranged from 0.70 to 0.91, indicating the presence of vertical and horizontal adsorption orientations for these organic molecules at all tested solution temperatures. The calculated saturation adsorption capacities (Qsat) were 332.57-256.62 mg/g for CV and 304.47-240.62 mg/g for MB, and an exothermic adsorption was observed for both adsorbates. The estimated adsorption energies (∆E) were < 25 kJ/mol, confirming that the SAAES/SA/MNPs-dye interactions were governed by physical forces as electrostatic interactions. This bio-based adsorbent was effectively regenerated using ethanol and it can be reused showing a removal of 71 and 74 % of MB and CV, respectively, after fourth adsorption-desorption cycles. Overall, the results of this article suggest the attractive performance of SAAES/SA/MNPs for removing basic dyes from aqueous solutions, thus highlighting the promising potential of this magnetic bio-based adsorbent for sustainable wastewater treatment at an industrial level.

Recent Advances in C-S-H Nucleation Seeding for Improving Cement Performances

Reducing cement CO2 footprint is a societal need. This is being achieved mainly by replacing an increasing amount of Portland clinker by supplementary cementitious materials. However, this comes at a price: lower mechanical strengths at early ages due to slow pozzolanic reaction(s). This is being addressed by using accelerator admixtures. In this context, calcium silicate hydrate nucleation seeding seems to have a promising future, as it can accelerate cement and pozzolanic reactions at early ages, optimising their microstructures, without compromising late strength and durability performances. In fact, these features could even be improved. Moreover, other uses are low temperature concreting, precasting, shotconcrete, etc. Here, we focus on reviewing recent reports on calcium silicate hydrate seeding using commercially available admixtures. Current knowledge on the consequences of nucleation seeding on hydration reactions and on early and late mechanical strengths is discussed. It is noted that other features, in addition to the classic alite hydration acceleration, are covered here including the enhanced ettringite precipitation and the very efficient porosity refinement, which take place in the seeded binders. Finally, because the seeded binders seem to be denser, durability properties could also be enhanced although this remains to be properly established.

Basic physiology of Pseudomonas aeruginosa contacted with carbon nanocomposites

Experiments describing properties of nanomaterials on bacteria are frequently limited to the disk diffusion method or other end-point methods indicating viability or survival rate in plate count assay. Such experimental design does not show the dynamic changes in bacterial physiology, mainly when performed on reference microorganisms (Escherichia coli and Staphylococcus aureus). Testing other microorganisms, such as Pseudomonas aeruginosa, could provide novel insights into the microbial response to nanomaterials. Therefore, we aimed to test selected carbon nanomaterials and their components in a series of experiments describing the basic physiology of P. aeruginosa. Concentrations ranging from 15.625 to 1000 µg/mL were tested. The optical density of cultures, pigment production, respiration, growth curve analysis, and biofilming were tested. The results confirmed variability in the response of P. aeruginosa to tested nanostructures, depending on their concentration. The co-incubation with the nanostructures (in concentration 125 µg/mL) could inhibit the population growth (in most cases) or promote it in the case of graphene oxide. Furthermore, a specific concentration of a given nanomaterial could cause contradictory effects leading to stimulation or inhibition of pigmentation, an optical density of the cultures, or biofilm formation. We have found that particularly nanomaterials containing TiO2 could induce pigmentation in P. aeruginosa, which indicates the possibility of increased virulence. On the other hand, nanocomposites containing cobalt nanoparticles had the highest anti-bacterial potential when cobalt was displayed on the surface. Our approach revealed changes in respiration and growth dynamics that can be used to search for nanomaterials’ application in biotechnology.

Investigating the release of ZnO nanoparticles from cement mortars on microbiological models

Incorporating zinc oxide nanoparticles (ZnO NPs) into cement mortars may provide additional functions, e.g., self-cleaning and antibacterial or electroconductive ability. However, these NPs are also known for their potential toxicity. During the life cycle of a cement mortar, various abrasive forces cause the release of admixtures to the natural environment. The effect of the released NPs on model microorganisms has not been extensively studied. Previous studies have shown that nanomaterials may affect various microorganisms’ physiological responses, including changes in metabolic activity, biofilming, or growth rate. In this study, we have focused on evaluating the response of model microorganisms, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Candida albicans, towards ZnO nanoparticles released from cement mortars in different deterioration scenarios. The addition of ZnO nanoparticles to cement mortars had a noticeable effect on impeding the strength development. We have also detected that depending on the deterioration scenario, the release of ZnO nanoparticles was varied. Our studies have also shown that even though the release of nanoform ZnO could be limited by poor dispersion or the used filtration technique, the eluates have caused slight but statistically significant changes in the physiological features of studied microorganisms showing relatively low toxicity.