Microbial pretreatment of lignocellulosic biomass for enhanced biomethanation and waste management

Optimization of biomethane production from sweet sorghum bagasse using artificial neural networks combined with particle swarm algorithm

In the face of international movement away from fossil fuels caused pollution menace, many research labs are rushing towards next big breakthrough via effective biorefinery development employing non-edible agro-residues as feedstock. This work aims to evaluate and optimize the methane potential of underutilized full strength sweet sorghum bagasse (SSB) via anaerobic digestion (AD). Biochemical methane potential assays are set up for SSB AD under mesophilic and thermophilic conditions at four substrate-o-inoculum ratios (SIR) 3, 5, 7, and 9 with pH 6.5, 7.5, and 8.5 and with 80, 90, and 100 rpm mixing speed over 50 days. SIR 5 produced the highest cumulative biomethane yield of 4.25 L methane g-1 VS with a shorter lag time of 7.5 days and technical digestion time of 24 days. The influence of physio-chemical parameters on AD process dynamics is supported with 16s rRNA metagenomic sequencing. Based on complete experimental data sets, two artificial neural network (ANN) models are developed to identify the relevant significance of process parameters and to predict bagasse methane potential. Further, the developed ANN model is integrated with particle swarm optimization algorithm to create ideal AD process operating conditions which maximize the target variable, biomethane. The trained and cross-validated ANN-PSO model showed good-fit-accuracy with R2 > 0.995 and demonstrated satisfactory performance in the biomethane yield prediction from AD of non-edible agri-residues.

Recent progress in nanocomposites of carbon dioxide fixation derived reproducible biomedical polymers

In recent years, the environmental problems accompanying the extensive application of biomedical polymer materials produced from fossil fuels have attracted more and more attentions. As many biomedical polymer products are disposable, their life cycle is relatively short. Most of the used or overdue biomedical polymer products need to be burned after destruction, which increases the emission of carbon dioxide (CO₂). Developing biomedical products based on CO₂ fixation derived polymers with reproducible sources, and gradually replacing their unsustainable fossil-based counterparts, will promote the recycling of CO₂ in this field and do good to control the greenhouse effect. Unfortunately, most of the existing polymer materials from renewable raw materials have some property shortages, which make them unable to meet the gradually improved quality and property requirements of biomedical products. In order to overcome these shortages, much time and effort has been dedicated to applying nanotechnology in this field. The present paper reviews recent advances in nanocomposites of CO₂ fixation derived reproducible polymers for biomedical applications, and several promising strategies for further research directions in this field are highlighted.

The Measurement, Application and Effect of Oxygen in Microbial Fermentations: Focusing on Methane and Carboxylate Production

Oxygen is considered detrimental to anaerobic fermentation processes by many practitioners. However, deliberate oxygen sparging has been used successfully for decades to remove H2S in anaerobic digestion (AD) systems. Moreover, microaeration techniques during AD have shown that small doses of oxygen may enhance process performance and promote the in situ degradation of recalcitrant compounds. However, existing oxygen dosing techniques are imprecise, which has led to inconsistent results between studies. At the same time, real-time oxygen fluxes cannot be reliably quantified due to the complexity of most bioreactor systems. Thus, there is a pressing need for robust monitoring and process control in applications where oxygen serves as an operating parameter or an experimental variable. This review summarizes and evaluates the available methodologies for oxygen measurement and dosing as they pertain to anaerobic microbiomes. The historical use of (micro-)aeration in anaerobic digestion and its potential role in other anaerobic fermentation processes are critiqued in detail. This critique also provides insights into the effects of oxygen on these microbiomes. Our assessment suggests that oxygen dosing, when implemented in a controlled and quantifiable manner, could serve as an effective tool for bioprocess engineers to further manipulate anaerobic microbiomes for either bioenergy or biochemical production.

Biochemistry, Synthesis, and Applications of Bacterial Cellulose: A Review

The potential of cellulose nanocomposites in the new-generation super-performing nanomaterials is huge, primarily in medical and environment sectors, and secondarily in food, paper, and cosmetic sectors. Despite substantial illumination on the molecular aspects of cellulose synthesis, various process features, namely, cellular export of the nascent polysaccharide chain and arrangement of cellulose fibrils into a quasi-crystalline configuration, remain obscure. To unleash its full potential, current knowledge on nanocellulose dispersion and disintegration of the fibrillar network and the organic/polymer chemistry needs expansion. Bacterial cellulose biosynthesis mechanism for scaled-up production, namely, the kinetics, pathogenicity, production cost, and product quality/consistency remain poorly understood. The bottom-up bacterial cellulose synthesis approach makes it an interesting area for still wider and promising high-end applications, primarily due to the nanosynthesis mechanism involved and the purity of the cellulose. This study attempts to identify the knowledge gap and potential wider applications of bacterial cellulose and bacterial nanocellulose. This review also highlights the manufacture of bacterial cellulose through low-cost substrates, that is, mainly waste from brewing, agriculture, food, and sugar industries as well as textile, lignocellulosic biorefineries, and pulp mills.

Laccases—Versatile Enzymes Used to Reduce Environmental Pollution

The accumulation of waste and toxic compounds has become increasingly harmful to the environment and human health. In this context, the use of laccases has become a focus of interest, due to the properties of these versatile enzymes: low substrate specificity, and water formation as a non-toxic end product. Thus, we begin our study with a general overview of the importance of laccase for the environment and industry, starting with the sources of laccases (plant, bacterial and fungal laccases), the structure and mechanism of laccases, microbial biosynthesis, and the immobilization of laccases. Then, we continue with an overview of agro-waste treatment by laccases wherein we observe the importance of laccases for the biodisponibilization of substrates and the biodegradation of agro-industrial byproducts; we then show some aspects regarding the degradation of xenobiotic compounds, dyes, and pharmaceutical products. The objective of this research is to emphasize and fully investigate the effects of laccase action on the decomposition of lignocellulosic materials and on the removal of harmful compounds from soil and water, in order to provide a sustainable solution to reducing environmental pollution.

A Review of Pretreatment Methods to Improve Agri-Food Waste Bioconversion by Black Soldier Fly Larvae

As the world population increases, food demand and agricultural activity will also increase. However, ~30–40% of the food produced today is lost or wasted along the production chain. Increasing food demands would only intensify the existing challenges associated with agri-food waste management. An innovative approach to recover the resources lost along the production chain and convert them into value-added product(s) would be beneficial. An alternative solution is the use of the larvae of the black soldier fly (BSFL), Hermetia illucens L., which can grow and convert a wide range of organic waste materials into insect biomass with use as animal feed, fertilizer and/or bioenergy. However, the main concern when creating an economically viable business is the variability in BSFL bioconversion and processing due to the variability of the substrate. Many factors, such as the nutritional composition of the substrate heavily impact BSFL development. Another concern is that substrates with high lignin and cellulose contents have demonstrated poor digestibility by BSFL. Studies suggest that pretreatment methods may improve the digestibility and biodegradability of the substrate by BSFL. However, a systematic review of existing pretreatment methods that could be used for enhancing the bioconversion of these wastes by BSFL is lacking. This paper provides a state-of-the-art review on the potential pretreatment methods that may improve the digestibility of substrates by BSFL and consequently the production of BSFL. These processes include but are not limited to, physical (e.g., mechanical and thermal), chemical (alkaline treatments), and biological (bacterial and fungal) treatments.

Gene Editing Technologies for Sugarcane Improvement: Opportunities and Limitations

Plant-based biofuels present a promising alternative to depleting non-renewable fuel resources. One of the benefits of biofuel is reduced environmental impact, including reduction in greenhouse gas emission which causes climate change. Sugarcane is one of the most important bioenergy crops. Sugarcane juice is used to produce table sugar and first-generation biofuel (e.g., bioethanol). Sugarcane bagasse is also a potential material for second-generation cellulosic biofuel production. Researchers worldwide are striving to improve sugarcane biomass yield and quality by a variety of means including biotechnological tools. This paper reviews the use of sugarcane as a feedstock for biofuel production, and gene manipulation tools and approaches, including RNAi and genome-editing tools, such as TALENs and CRISPR-Cas9, for improving its quality. The specific focus here is on CRISPR system because it is low cost, simple in design and versatile compared to other genome-editing tools. The advance of CRISPR-Cas9 technology has transformed plant research with its ability to precisely delete, insert or replace genes in recent years. Lignin is the primary material responsible for biomass recalcitrance in biofuel production. The use of genome editing technology to modify lignin composition and distribution in sugarcane cell wall has been realized. The current and potential applications of genome editing technology for sugarcane improvement are discussed. The advantages and limitations of utilizing RNAi and TALEN techniques in sugarcane improvement are discussed as well.

Recent Progress and Trends in the Development of Microbial Biofuels from Solid Waste—A Review

This review covers the recent progress in the design and application of microbial biofuels, assessing the advancement of genetic engineering undertakings and their marketability, and lignocellulosic biomass pretreatment issues. Municipal solid waste (MSW) is a promising sustainable biofuel feedstock due to its high content of lignocellulosic fiber. In this review, we compared the production of fatty alcohols, alkanes, and n-butanol from residual biogenic waste and the environmental/economic parameters to that of conventional biofuels. New synthetic biology tools can be used to engineer fermentation pathways within micro-organisms to produce long-chain alcohols, isoprenoids, long-chain fatty acids, and esters, along with alkanes, as substitutes to petroleum-derived fuels. Biotechnological advances have struggled to address problems with bioethanol, such as lower energy density compared to gasoline and high corrosive and hygroscopic qualities that restrict its application in present infrastructure. Biofuels derived from the organic fraction of municipal solid waste (OFMSW) may have less environmental impacts compared to traditional fuel production, with the added benefit of lower production costs. Unfortunately, current advanced biofuel production suffers low production rates, which hinders commercial scaling-up efforts. Microbial-produced biofuels can address low productivity while increasing the spectrum of produced bioenergy molecules.

Two-stage banana leaves wastes utilization towards mushroom growth and biogas production

Banana leaves wastes (BL) were subjected to fungal treatment using Pleurotus ostreatus to produce edible mushrooms and biogas in the anaerobic digestion process. Effects of fungal treatment on mushrooms production, lignin degradation, trace elements compositions and biogas yield during the anaerobic digestion process were evaluated. Treatment with P.ostreatus for 36 d resulted in the production of 181 ± 19 g of edible mushrooms per 2 kg of BL with biological efficiency of 37 ± 4%. Lignin concentration in fungal treated BL decreased by 10% indicating an improvement on its digestibility. Important trace elements (Fe, Mn, Mo, Co and Ni) necessary for the improvement of the anaerobic digestion process were also significantly reduced (P < 0.05) during the fungal treatment process. The biogas yield for the fungal treated BL was 282 mL g^-1 VS^-1 of which this study suggests that could be improved through trace element supplementation during the anaerobic digestion process.

Microorganisms and Enzymes Used in the Biological Pretreatment of the Substrate to Enhance Biogas Production: A Review

The pretreatment of lignocellulosic biomass (LC biomass) prior to the anaerobic digestion (AD) process is a mandatory step to improve feedstock biodegradability and biogas production. An important potential is provided by lignocellulosic materials since lignocellulose represents a major source for biogas production, thus contributing to the environmental sustainability. The main limitation of LC biomass for use is its resistant structure. Lately, biological pretreatment (BP) gained popularity because they are eco-friendly methods that do not require chemical or energy input. A large number of bacteria and fungi possess great ability to convert high molecular weight compounds from the substrate into lower mass compounds due to the synthesis of microbial extracellular enzymes. Microbial strains isolated from various sources are used singly or in combination to break down the recalcitrant polymeric structures and thus increase biogasgeneration. Enzymatic treatment of LC biomass depends mainly on enzymes like hemicellulases and cellulases generated by microorganisms. The articles main purpose is to provide an overview regarding the enzymatic/biological pretreatment as one of the most potent techniques for enhancing biogas production.

Solubilization of Phenols and Sugars from Raspberry Extrudate by Hydrothermal Treatments

Raspberry extrudate residue has bioactive compounds in its matrix that are considered high-added value compounds. In the present study, different hydrothermal treatments were carried out using different operational systems, temperatures and times to solubilize raspberry extrudate in order to obtain these bioactive compounds (i.e., sugars and phenolic compounds). Hydrothermal treatment conditions were assessed in the range of 60 °C to 210 °C, with increments of 30 °C. The hydrothermal treatment at 210 °C for 5 min with direct steam and decompression was the most efficient process based on the solubilization of sugars and phenols, as well as on the antioxidant capacity of the products recovered in the liquid phase after treatment. Under these conditions, the concentration of soluble phenols was more than double the concentration in the raw raspberry extrudate, with more than 5000 mg phenols per kilogram of raspberry extrudate. The obtained values demonstrate the potential of applying this treatment for recovering valuable bioactive compounds from raspberry extrudate.

Response surface methodology based optimization and scale-up production of amylase from a novel bacterial strain, Bacillus aryabhattai KIIT BE-1

A novel strain KIIT BE-1 isolated from a specialized environment, screened through starch iodine test from a set of eighty-five biodigestate isolates, produced amylase maximally when cultured for 48 h at 37 °C. The molecular and biochemical characterization confirmed it as a strain of Bacillus aryabhattai. It exhibited optimal amylase activity (3.20 U/ml) at 36 h post incubation with a media combination of starch and yeast extract for C-N source respectively. Statistical optimisation by response surface modeling showed R² values of 0.9645 for biomass and 0.9831 for amylase activity, suggesting the significance of the model. The optimised medium (10.25 % starch, 5.0 % peptone, 5.18 % yeast extract, pH 7.3) enhanced the enzyme activity to 4.16 U/ml (1.39-fold) from 3.20 U/ml of un-optimised medium. Further, the biomass yield and the enzymatic activity in optimized medium and process conditions increased by 1.14 and 1.21 folds subjected to a 5 l scaled-up operation in a lab-scale bioreactor.

Agricultural waste

The management of agricultural waste has become very important because the inappropriate disposal yields negative effects on the environment. The resource recovery from agricultural waste which converts waste into available resources can reduce the waste and new resource consumption. This review summarizes the 2018 researches of over three hundred scholar papers from several aspects: agricultural waste, and, waste chemical characterization, agricultural waste material, adsorption, waste energy, composting, waste biogas, agricultural waste management, and others.

Genome-Wide and Functional View of Proteolytic and Lipolytic Bacteria for Efficient Biogas Production through Enhanced Sewage Sludge Hydrolysis

In this study, we used a multifaceted approach to select robust bioaugmentation candidates for enhancing biogas production and to demonstrate the usefulness of a genome-centric approach for strain selection for specific bioaugmentation purposes. We also investigated the influence of the isolation source of bacterial strains on their metabolic potential and their efficiency in enhancing anaerobic digestion. Whole genome sequencing, metabolic pathway reconstruction, and physiological analyses, including phenomics, of phylogenetically diverse strains, Rummeliibacillus sp. POC4, Ochrobactrum sp. POC9 (both isolated from sewage sludge) and Brevundimonas sp. LPMIX5 (isolated from an agricultural biogas plant) showed their diverse enzymatic activities, metabolic versatility and ability to survive under varied growth conditions. All tested strains display proteolytic, lipolytic, cellulolytic, amylolytic, and xylanolytic activities and are able to utilize a wide array of single carbon and energy sources, as well as more complex industrial by-products, such as dairy waste and molasses. The specific enzymatic activity expressed by the three strains studied was related to the type of substrate present in the original isolation source. Bioaugmentation with sewage sludge isolates–POC4 and POC9–was more effective for enhancing biogas production from sewage sludge (22% and 28%, respectively) than an approach based on LPMIX5 strain (biogas production boosted by 7%) that had been isolated from an agricultural biogas plant, where other type of substrate is used.

A comparative study of biogasification of wheat straw, sugarcane bagasse and pressmud

A study to compare biogas production potentials of wheat straw, sugarcane bagasse and pressmud was conducted at pH 8.0, temperature 40 °C and substrate concentration 20 g/L. Raw substrates were thermogravimetrically and Fourier-transform infrared spectroscopically characterised. TGA showed the weight loss of samples attributable to moisture, hemicellulose, cellulose and lignin losses. FTIR analysis indicated functional groups characteristics of hemicellulose, cellulose and lignin. Biogas production was the maximum between 10th and 25th day for all the tests. WS with 10% inoculum showed the highest cumulative biogas production of 370 mL/g followed by the SB (316 mL/g) and PM (211 mL/g) counterparts. The corresponding values with 5% inoculum were 303 mL/g (WS), 244 mL/g (SB) and 152 mL/g (PM). The inoculum volume also positively affected the cumulative biogas production (22.1, 29.5 and 38.8% respectively). The higher volatile fatty acids as observed in case of WS which further facilitated higher biogas production could be due to its maximum volatile solids content (88.9%) and water swelling capacity (7.37). A consistently increasing trend in the methane content (varying between 54 and 61%) in all the tests was observed till the 20th day. The biogas (7.7-21.7 mL/g) and the methane (35-42%) contents showed a decreasing trend thereafter, the lowest being observed during the 35-40-day period.