Role of C/N ratio on microalgae growth in mixotrophy and incorporation of titanium nanoparticles for cell flocculation and lipid enhancement in economical biodiesel application

Spatio-temporal variation of toxin-producing gene abundance in Microcystis aeruginosa from Poyang Lake

Microcystis aeruginosa (M. aeruginosa) causes massive blooms in eutrophic freshwater and releases microcystin. Poyang Lake is the largest freshwater lake in China and has kept a mid-nutrient level in recent years. However, there is little research on microcystin production in Poyang Lake. In this study, water and sediment samples from ten sampling sites in Poyang Lake were collected from May to December in 2020, and from January to April in 2021 respectively. Microcystis genes (mcyA, mcyB, 16 s rDNA) were quantified by real-time fluorescence quantitative PCR analysis, and then the spatial and temporal variation of mcy genes, physicochemical factors, and bacterial population structure in the lake was analyzed. The relationship between the abundance of mcy genes and physicochemical factors in water column was also revealed. Results indicated that the microcystin-producing genes mcyA and mcyB showed significant differences in spatial and temporal levels as well, which is closely related to the physicochemical factors especially the water temperature (p < 0.05) and the nitrogen content (p < 0.05). The abundance of mcy genes in the sediment in December affected the abundance of mcy genes in the water column in the next year, while the toxic Microcystis would accumulate in the sediment. In addition to the toxic Microcystis, we also found a large number of non-toxic Microcystis in the water column and sediment, and the ratio of toxic to non-toxic species can also affect the toxicity production of M. aeruginosa. Overall, the results showed that M. aeruginosa toxin-producing genes in Poyang Lake distributed spatially and temporally which related to the physicochemical factors of Poyang Lake.

New insights into raceway cultivation of Euglena gracilis under long-term semi-continuous nitrogen starvation

This study aimed to investigate the physiological responses of Euglena gracilis (E. gracilis) when subjected to semicontinuous N-starvation (N-) for an extended period in open ponds. The results indicated that the growth rates of E. gracilis under the N- condition (11 ± 3.3 g m^-2 d^-1) were higher by 23% compared to the N-sufficient (N+, 8.9 ± 2.8 g m^-2 d^-1) condition. Furthermore, the paramylon content of E.gracilis was above 40% (w/w) of dry biomass in N- condition compared to N+ (7%) condition. Interestingly, E. gracilis exhibited similar cell numbers regardless of nitrogen concentrations after a certain time point. Additionally, it demonstrated relatively smaller cell size over time, and unaffected photosynthetic apparatus under N- condition. These findings suggest that there is a tradeoff between cell growth and photosynthesis in E. gracilis, as it adapts to semi-continuous N- conditions without a decrease in its growth rate and paramylon productivity. Notably, to the author's knowledge, this is the only study reporting high biomass and product accumulation by a wild-type E. gracilis strain under N- conditions. This newly identified long-term adaptation ability of E. gracilis may offer a promising direction for the algal industry to achieve high productivity without relying on genetically modified organisms.

Microalga Coelastrella sp. Cultivation on Unhydrolyzed Molasses-Based Medium towards the Optimization of Conditions for Growth and Biomass Production under Mixotrophic Cultivation

Improving biomass production with the utilization of low-cost substrate is a crucial approach to overcome the hindrance of high cost in developing large-scale microalgae production. The microalga Coelastrella sp. KKU-P1 was mixotrophically cultivated using unhydrolyzed molasses as a carbon source, with the key environmental conditions being varied in order to maximize biomass production. The batch cultivation in flasks achieved the highest biomass production of 3.81 g/L, under an initial pH 5.0, a substrate to inoculum ratio of 100:3, an initial total sugar concentration of 10 g/L, and a sodium nitrate concentration of 1.5 g/L with continuous light illumination at 23.7 W/m². The photobioreactor cultivation results indicated that CO₂ supplementation did not improve biomass production. An ambient concentration of CO₂ was sufficient to promote the mixotrophic growth of the microalga as indicated by the highest biomass production of 4.28 g/L with 33.91% protein, 46.71% carbohydrate, and 15.10% lipid. The results of the biochemical composition analysis suggest that the microalgal biomass obtained is promising as a source of essential amino acids and pigments as well as saturated and monounsaturated fatty acids. This research highlights the potential for bioresource production via microalgal mixotrophic cultivation using untreated molasses as a low-cost raw material.

Optimization of the culture of Chlorella sorokiniana PA.91 by RSM: effect of temperature, light intensity, and MgAC-NPs

The unique physicochemical properties of magnesium amino clay nanoparticles (MgAC-NPs) tends to be beneficial in the application as a co-additive in treating microalgae. Also, MgAC-NPs can create oxidative stress in the environment, concurrently elective control bacteria in mixotrophic culture, and stimulate CO₂ biofixation. The condition of the cultivation of newly isolated strains, Chlorella sorokiniana PA.91, was optimized for the first time for MgAC-NPs at various temperatures and light intensities in the culture medium of municipal wastewater (MWW) by central composite design in the response surface methodology (RSM-CCD). This study examined synthesized MgAC-NP with their FE-SEM, EDX, XRD, and FT-IR characteristics. The synthesized MgAC-NPs were naturally stable, cubic shaped, and within the size range of 30-60 nm. The optimization results show that at culture conditions of 20 °C, 37 μmol m^-2 s^-1, and 0.05 g L^-1, microalga MgAC-NPs have the best growth productivity and biomass performance. Maximum dry biomass weight (55.41%), specific growth rate (30.26%), chlorophyll (81.26%), and carotenoids (35.71%) were achieved under the optimized condition. Experimental results displayed that C.S. PA.91 has a high capacity for lipid extraction (1.36 g L^-1) and significant lipid efficiency (45.1%). Also, in 0.2 and 0.05 g L^-1 of the MgAC-NPs, COD removal efficiency 91.1% and 81.34% from C.S. PA.91 showed, respectively. These results showed the potential of C.S. PA.91-MgAC-NPs for nutrient removal in wastewater treatment plants and their quality as sources of biodiesel.

Microalgae on distillery wastewater treatment for improved biodiesel production and cellulose nanofiber synthesis: A sustainable biorefinery approach

Sugarcane spent wash generates waste at a large scale that impacts the environment, hence the classic waste reuse technology needs to be implemented. An integrated approach of spent wash and microalgae cultivation to produce biodiesel has gained momentum in recent times. However, the microalgae technology lacks the functional utilization of de-oiled microalgae biomass (DOB). This study proposed the development of a microalgae-based advanced process for distillery spent wash treatment, biomass recovery for biodiesel and utilizing algal residue as a step towards waste management. A novel microalga Coelastrella sp KJ-04 grown in distillery spent wash represented with high biomass (4.61g/L) and lipid production (3.6 g/L). The significant reduction in Chemical Oxygen Demand (COD, 49.3%), Total Nitrogen (TN, 49.7%), Total Phosphorous (TP, 21.8%), Total Organic Carbon (TOC, 40.2%), Total Sulphur (S, 37.2%) and Potassium (K, 42.5%) were achieved in spent wash. The extracted lipids of Coelastrella sp KJ-04 were converted to Fatty acid methyl ester (FAME) and examined by Gas chromatography -mass spectrometry (GC-MS) to observe the suitability for biodiesel prospect. The de-oiled biomass (DOB) was utilized for the synthesis of Cellulose nanofibers (CNF), purified and estimated with a diameter ranging between 20 and 27 nm. The crystalline structure and functional group of CNF were analyzed by X-ray diffraction (XRD) and Fourier Transform infrared spectroscopy (FTIR). The unprecedented work demonstrated the microalgae biorefinery approach for spent wash remediation, biodiesel synthesis and simultaneous production of biodegradable CNF from algal residue to support waste-free technology. In future, CNF can be reinforced into material for concrete as it could be the smart alternative to replace synthetic cement plastics.

Microalgae as Raw Materials for Aquafeeds: Growth Kinetics and Improvement Strategies of Polyunsaturated Fatty Acids Production

Studies have shown that ancient cultures used microalgae as food for centuries. Currently, scientific reports highlight the value of nutritional composition of microalgae and their ability to accumulate polyunsaturated fatty acids at certain operational conditions. These characteristics are gaining increasing interest for the aquaculture industry which is searching for cost-effective replacements for fish meal and oil because these commodities are one of the most significant operational expenses and their dependency has become a bottleneck for their sustainable development of the aquaculture industry. This review is aimed at highlighting the use of microalgae as polyunsaturated fatty acid source in aquaculture feed formulations, despite their scarce production at industrial scale. Moreover, this document includes several approaches to improve microalgae production and to increase the content of polyunsaturated fatty acids with emphasis in the accumulation of DHA, EPA, and ARA. Furthermore, the document compiles several studies which prove microalgae-based aquafeeds for marine and freshwater species. Finally, the study explores the aspects that intervene in production kinetics and improvement strategies with possibilities for upscaling and facing main challenges of using microalgae in the commercial production of aquafeeds.

Enhancing microalgal lipid accumulation for biofuel production

Microalgae have high lipid accumulation capacity, high growth rate and high photosynthetic efficiency which are considered as one of the most promising alternative sustainable feedstocks for producing lipid-based biofuels. However, commercialization feasibility of microalgal biofuel production is still conditioned to the high production cost. Enhancement of lipid accumulation in microalgae play a significant role in boosting the economics of biofuel production based on microalgal lipid. The major challenge of enhancing microalgal lipid accumulation lies in overcoming the trade-off between microalgal cell growth and lipid accumulation. Substantial approaches including genetic modifications of microalgal strains by metabolic engineering and process regulations of microalgae cultivation by integrating multiple optimization strategies widely applied in industrial microbiology have been investigated. In the present review, we critically discuss recent trends in the application of multiple molecular strategies to construct high performance microalgal strains by metabolic engineering and synergistic strategies of process optimization and stress operation to enhance microalgal lipid accumulation for biofuel production. Additionally, this review aims to emphasize the opportunities and challenges regarding scaled application of the strategic integration and its viability to make microalgal biofuel production a commercial reality in the near future.

Algal biorefinery culminating multiple value-added products: recent advances, emerging trends, opportunities, and challenges

Algal biorefinery is rising as a prominent solution to economically fulfill the escalating global requirement for nutrition, feed, fuel, and medicines. In recent years, scientific productiveness associated with microalgae-based studies has elaborated in multiplied aspects, while translation to the commercial level continues to be missing. The present microalgal biorefinery has a challenge in long-term viability due to escalated market price of algal-mediated biofuels and bioproducts. Advancements are required in a few aspects like improvement in algae processing, energy investment, and cost analysis of microalgae biorefinery. Therefore, it is essential to recognize the modern work by understanding the knowledge gaps and hotspots driving business scale up. The microalgae biorefinery integrated with energy-based products, bioactive and green compounds, focusing on a circular bioeconomy, is urgently needed. A detailed investigation of techno-economic analysis (TEA) and life cycle assessment (LCA) is important to increase the market value of algal products. This review discusses the valorization of algal biomass for the value-added application that holds a sustainable approach and cost-competitive algal biorefinery. The current industries, policies, technology transfer trends, challenges, and future economic outlook are discussed. This study is an overview through scientometric investigation attempt to describe the research development contributing to this rising field.

Anaerobic digestion and agronomic applications of microalgae for its sustainable valorization

Microalgae are considered potential candidates in biorefinery processes, and due to their biochemical properties, they can be used in the production of biofuels such as biogas, as well as for bioremediation of liquid effluents. The objective of this review is to study the current status of microalgae anaerobic digestion and agricultural uses (as bio-stimulants and biofertilizers), starting from microalgae cultivation. Indeed, the efficiency of these processes necessarily depends on the evaluation of different biotic and abiotic factors that affect the growth of microalgae. However, the adaptation and the optimization of process parameters on a large scale is also limited by energy and economic constraints. Moreover, the integration of biogas production processes with microalgae cultivation allows a nutrients and CO2 virtuous loop, thus promoting the sustainability of the process. Finally, this paper provides a general overview of biogas and biofertilizers production combination, as well as the related challenges and recommended future research perspectives to complement the gap in the literature.

Valorization of microalgae biomass into bioproducts promoting circular bioeconomy: a holistic approach of bioremediation and biorefinery

The need for alternative source of fuel has demanded the cultivation of 3rd generation feedstock which includes microalgae, seaweed and cyanobacteria. These phototrophic organisms are unique in a sense that they utilise natural sources like sunlight, water and CO₂ for their growth and metabolism thereby producing diverse products that can be processed to produce biofuel, biochemical, nutraceuticals, feed, biofertilizer and other value added products. But due to low biomass productivity and high harvesting cost, microalgae-based production have not received much attention. Therefore, this review provides the state of the art of the microalgae based biorefinery approach to define an economical and sustainable process. The three major segments that need to be considered for economic microalgae biorefinery is low cost nutrient source, efficient harvesting methods and production of by-products with high market value. This review has outlined the use of various wastewater as nutrient source for simultaneous biomass production and bioremediation. Further, it has highlighted the common harvesting methods used for microalgae and also described various products from both raw biomass and delipidified microalgae residues in order to establish a sustainable, economical microalgae biorefinery with a touch of circular bioeconomy. This review has also discussed various challenges to be considered followed by a techno-economic analysis of the microalgae based biorefinery model.

Mixotrophic Growth of Chlorella sorokiniana on Acetate and Butyrate: Interplay Between Substrate, C:N Ratio and pH

Microalgae can be cultivated on waste dark fermentation effluents containing volatile fatty acids (VFA) such as acetate or butyrate. These VFA can however inhibit microalgae growth at concentrations above 0.5-1 g_C.L^-1. This study used the model strain Chlorella sorokiniana to investigate the effects of acetate or butyrate concentration on biomass growth rates and yields alongside C:N:P ratios and pH control. Decreasing undissociated acid levels by raising the initial pH to 8.0 allowed growth without inhibition up to 5 g_C.L^-1 VFAs. However, VFA concentration strongly affected biomass yields irrespective of pH control or C:N:P ratios. Biomass yields on 1.0 g_C.L^-1 acetate were around 1.3-1.5 g_C.g_C ^-1 but decreased by 26-48% when increasing initial acetate to 2.0 g_C.L^-1. This was also observed for butyrate with yields decreasing up to 25%. This decrease in yield in suggested to be due to the prevalence of heterotrophic metabolism at high organic acid concentration, which reduced the amount of carbon fixed by autotrophy. Finally, the effects of C:N:P on biomass, lipids and carbohydrates production dynamics were assessed using a mixture of both substrates. In nutrient replete conditions, C. sorokiniana accumulated up to 20.5% carbohydrates and 16.4% lipids while nutrient limitation triggered carbohydrates accumulation up to 45.3%.

Cultivation of microalgae on unhydrolysed waste molasses syrup using mass cultivation strategy for improved biodiesel

High cultivation cost and low lipid yield are framed as a major bottleneck for the production of microalgae biodiesel. Hence, we first and foremost highlight a trophic mode transition, coupled with a combinatorial effect of organic carbon, nitrogen and light (C/N/L) on an isolated microalga Chlorococcum sp. SVF in a one pot tri-phasic intermittent feeding system by developing a lab scale Raceway tank (40L). Hitherto, waste molasses syrup without hydrolysis is unexplored in algal bioenergy arena. The direct utilisation capability of sucrose, served by waste unhydrolysed molasses syrup (WUMS), effectively modulates the intrinsic biochemical and physiological characteristics towards microalgae biomass and lipid assimilation. Response surface methodology-central composite design (RSM-CCD) tool has been employed to observe the cumulative impact of light irradiation and nutrient sources (carbon and nitrogen) on cellular stoichiometric analysis. Experimental results exhibit a potentially achievable biomass (18.88 g L^-1) and lipid accumulation (80.34%) under the light intensity of 75.5 µmol m^-2 s^-1 with stepwise light attenuation strategy. Characterisation of fatty acid methyl esters (FAME) reveals the dominance of oleic acid (32.72%) and palmitic acid methyl esters (32.49%) in mixotrophic condition, which are considered as the upmost indicators of quality biodiesel. The biofuel properties were obtained in acquiescence with American and European standard. These findings are therefore a way forward towards the effective growth of Chlorococcum sp. SVF in sucrose rich inexpensive industrial waste stream that positively influences the lipid yield for large scale sustainable biodiesel production.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-02823-7.