A reagent-ready-on-chip microfluidic immunoassay system for rapid detection of influenza A H1N1 and H3N2 viruses

One-step immunoassay based on filtration for detection of food poisoning-related bacteria

A one-step immunoassay based on filtration was presented, which used microbeads for target analyte detection and filters with appropriate pore sizes to distinguish the complexity of target analyte and microbeads. For effective bacterial detection, the microbead size and the filter's pore size must be optimized. The optimal concentrations of the enzyme (urease) and antibody were determined at the maximum absorbance change, that is, the maximum pH change. The pH change was measured using a field-effect transistor (FET). The correlation between pH change and threshold voltage was estimated to be 21.7 mV/pH, and the correlation between pH change and the source-drain current was estimated to be -379 nA/pH. For the one-step immunoassay, antibodies against target bacteria were isolated from horse serum by filtration, and these antibodies were estimated to have a sufficiently high specificity to overcome cross-reactivity among five types of food poisoning-related bacteria: Escherichia coli O157, Salmonella typhimurium, Listeria monocytogenes, Bacillus cereus, and Staphylococcus aureus. Finally, the FET-based one-step immunoassay was demonstrated for five types of food poisoning-related bacteria in human serum.

Autonomous electrochemical biosensing of glial fibrillary acidic protein for point-of-care detection of central nervous system injuries

The integration of electrochemical biosensors into fluid handling units such as paper-based, centrifugal, and capillary microfluidic devices has been explored with the purpose of developing point-of-care platforms for quantitative detection of bodily fluid markers. However, the present fluidic device designs largely lack the capacity of full assay automation, needing manual loading of one or multiple reagents or requiring external devices for liquid manipulation. Such fluidic handing platforms also require universality for detecting various biomarkers. These platforms are also largely produced using materials unsuitable for scalable manufacturing and with a high production cost. The mechanism of fluid flow also often induces noise to the embedded biosensors which adversely impacts the accuracy of biosensing. This work addresses these challenges by presenting a reliable design of a fully automated and universal capillary-driven microfluidic platform that automates several steps of label-free electrochemical biosensing assays. These steps include sample aliquoting, controlled incubation, removal of non-specific bindings, reagent mixing and delivery to sensing electrodes, and electrochemical detection. The multilayer architecture of the microfluidic device is made of polymeric and adhesive materials commercially used for the fabrication of point-of-care devices. The design and geometry of different components of the device (e.g., sampling unit, mixer, resistances, delay valves, interconnecting components) were optimized using a combined experimental testing and numerical fluid flow modeling to reach high reproducibility and minimize the noise-induced to the biosensor. As a proof of concept, the performance of this on-chip immunosensing platform was demonstrated for rapid and autonomous detection of glial fibrillary acidic proteins (GFAP) in phosphate-buffered saline (PBS). The microfluidic immunosensing device exhibited a linear detection range of 10-1000 pg mL^-1 for the detection of GFAP within 30 min, with a limit of detection (LoD) and sensitivity of 3 pg mL^-1 and 39 mL pg^-1 mm^-2 in PBS, respectively. Owing to its simplicity, sample-to-result performance, universality for handing different biofluids, low cost, high reproducibility, compatibility with scalable production, and short analysis time, the proposed biosensing platform can be further adapted for the detection of other biomarkers in different clinical bodily fluids for rapid diagnostic and prognostic applications.

Biomarker barcodes: multiplexed microfluidic immunohistochemistry enables high-throughput analysis of tissue microarray

We present a multiplexed microfluidic immunohistochemistry (IHC) technology that enables high-throughput analysis of tissue microarrays (TMAs) using the patterns of biomarker barcodes, which consist of a series of expressed linear patterns of specific biomarkers. A multichannel poly(dimethylsiloxane) microfluidic device was reversibly assembled by the pressure of simple equipment for multiplexed IHC on each core of TMA or cell microarray (CMA) section slides. By injecting primary antibodies from different biomarkers independently into each channel, multiplexed immunostaining can be performed on each core of TMA. We confirmed the equal immunostaining quality regardless of the channel orders and core positions in the slide. Four different biomarkers (ER, PR, HER2, and Ki67) were used for the demonstration of distinctive expression patterns on CMAs which consist of six different breast cancer cell lines, and it was confirmed that these bar-like signals could be a biomarker barcode for the TMA core. A biomarker barcode of breast cancer patient-derived TMA was quickly scanned by a slide scanner and compared to the conventional method for breast cancer diagnosis. This "barcode-IHC" concept, which has been verified by performing multiplexed microfluidic IHC on CMA and TMA samples, provides high reproducibility and the potential of high-throughput screening with molecular diagnostic capability.

On-chip plasmonic immunoassay based on targeted assembly of gold nanoplasmonic particles

An on-chip, non-enzymatic immunoassay was developed via the targeted assemblies of gold nanoparticles with target proteins in degassing-driven microfluidic devices and simply quantified at the single particle level.

Microfluidic on-chip immunohistochemistry directly from a paraffin-embedded section

We present here a novel microfluidic platform that can perform microfluidic on-chip immunohistochemistry (IHC) processes on a formalin-fixed paraffin-embedded section slide. Unlike previous microfluidic IHC studies, our microfluidic chip made of organic solvent-resistant polyurethane acrylate (PUA) is capable of conducting on-chip IHC processes consecutively. A narrow channel wall structure of the PUA chip shows effective sealing by pressure-based reversible assembly with a section slide. We performed both on-chip IHC and conventional IHC processes and compared the IHC results based on the immunostaining intensity. The result showed that the effects of the on-chip deparaffinization, antigen retrieval, and immunoreaction processes on the IHC result were equivalent to conventional methods while reducing the total process time to less than 1/2. The experiment with breast cancer tissue shows that human epidermal growth factor receptor 2 (HER2) classification can be performed by obtaining a clearly distinguishable immunostaining intensity according to the HER2 expression level. We expect our on-chip microfluidic platform to provide a facile technique suitable for miniaturized, automated, and precise diagnostic devices, including a point-of-care device.