Surface coating of hydroxyapatite on silk nanofiber through biomineralization using ten times concentrated simulated body fluid and the evaluation for bone regeneration

Hydroxyapatite-Coated Small Intestinal Submucosa Membranes Enhanced Periodontal Tissue Regeneration through Immunomodulation and Osteogenesis via BMP-2/Smad Signaling Pathway

Periodontitis, a chronic infection causing periodontal tissue loss, may be effectively addressed with in situ tissue engineering. Small intestinal submucosa (SIS) offers exceptional biocompatibility and biodegradability but lacks sufficient osteoconductive and osteoinductive properties. This study develops and characterizes SIS coated with hydroxyapatite (SIS-HA) and gelatin methacrylate hydroxyapatite (SIS-Gel-HA) using biomineralization and chemical crosslinking. The impact on periodontal tissue regeneration is assessed by evaluating macrophage immune response and osteogenic differentiation potential of periodontal ligament stem cells (PDLSCs) in vitro and rat periodontal defects in vivo. The jejunum segment, with the highest collagen type I content, is optimal for SIS preparation. SIS retains collagen fiber structure and bioactive factors. Calcium content is 2.21% in SIS-HA and 2.45% in SIS-Gel-HA, with no significant differences in hydrophilicity, physicochemical properties, protein composition, or biocompatibility among SIS, SIS-HA, SIS-Gel, and SIS-Gel-HA. SIS is found to upregulate M2 marker expression, both SIS-HA and SIS-Gel-HA enhance the osteogenic differentiation of PDLSCs through the BMP-2/Smad signaling pathway, and SIS-HA demonstrates superior in vitro osteogenic activity. In vivo, SIS-HA and SIS-Gel-HA yield denser, more mature bones with the highest BMP-2 and Smad expression. SIS-HA and SIS-Gel-HA demonstrate enhanced immunity-osteogenesis coupling, representing a promising periodontal tissue regeneration approach.

Biomineralization of bone-like hydroxyapatite to upgrade the mechanical and osteoblastic performances of poly(lactic acid) scaffolds

Biomimetic mineralization of high-strength apatite structure essentially relies on mimicking the inorganic building blocks of naturally occurring bones. However, conventional routes still have substantial function gaps in providing precision control over the geometrical dimensions and crystalline morphology of biomineralized apatite. Herein, we conceived the concept of microwave-assisted biomineralization (MAB) to customize 1D hydroxyapatite nanowhiskers (HANWs) at graphene templates, rendering the formation of graphene-hydroxyapatite (Gr-HA) nanohybrids. The HANWs essentially resembled bone apatite in elemental composition (Ca/P = 1.74), diameter (~20 nm), crystallinity (63 %), and rodlike geometry (aspect ratio of ~6). The Gr-HA nanohybrids were uniformly incorporated into poly(lactic acid) (PLA) microfibers (~1 μm) by electrospinning, engendering fibrous membranes with a set of Gr-HA loadings (10, 20 and 30 wt%). Intimate interactions were generated between Gr-HA and PLA matrix, contributing to significant promotion of the mechanical properties for PLA composite membranes. For example, the yield strength and elastic modulus of the PLA composite membranes loaded with 30 wt% Gr-HA achieved 5.4 and 66.4 MPa, increasing nearly 182 % and over 94 % compared to those of pure PLA, respectively. Moreover, the bone-like HANWs endowed PLA membranes with excellent cytocompatibility and good bioactivity, as demonstrated by over 38 % increase in cell viability and rapid apatite formation in mineral solution. The impressive combination of mechanical properties and biological characteristics make the PLA/Gr-HA scaffolds promising for guided tissue/bone regeneration therapy.

Preparation and Characterization of Porous Poly(Lactic Acid)/Poly(Butylene Adipate-Co-Terephthalate) (PLA/PBAT) Scaffold with Polydopamine-Assisted Biomineralization for Bone Regeneration

The development of scaffolds that simultaneously provide porous architectures and osteogenic properties is the major challenge in tissue engineering. Herein, a scaffold with high porosity and well interconnected networks, namely poly(lactic acid)/poly(butylene adipate-co-terephthalate) (PLA/PBAT), was fabricated using the gas foaming/ammonium bicarbonate particulate leaching technique. Mussel-inspired polydopamine (PDA)-assisted biomineralization generated by two-step simple soaking in dopamine solution and 10× SBF-like solution was performed to improve the material's osteogenicity. Highly porous scaffolds available in less organized opened cell structures with diameters ranging from 10 µm to 100 µm and 200 µm to 500 µm were successfully prepared. The well interconnected porous architectures were observed through the whole thickness of the scaffold. The even deposition of the organic-inorganic bioactive mineralized layer composed of PDA and nano-scale hydroxyapatite (HA) crystals on the scaffold surface was evidenced by scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDX), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The developed scaffold exhibited high total porosity (84.17 ± 1.29%), a lower surface contact angle (θ = 45.7 ± 5.9°), lower material degradation rate (7.63 ± 2.56%), and a high level of material biocompatibility. The MTT assay and Alizarin Red S staining (ARS) confirmed its osteogenic enhancement property toward human osteoblast-like cells (MG-63). These results clarified that the developed porous PLA/PBAT scaffold with PDA-assisted biomineralization exhibited good potential for application as a biomaterial for bone tissue regeneration and hard tissue engineering.

Enhanced formation of bioactive and strong silk-bioglass hybrid materials through organic-inorganic mutual molecular nucleation induction and templating

Materials based on silk fibroin (SF) are important for many biomedical applications due to their excellent biocompatibility and tunable biodegradability. However, the insufficient mechanical strength and low bioactivity of these materials have limited their applications. For silk hydrogels, slow gelation is also a crucial problem. In this work, a simple approach is developed to address these challenging problems all at once. By mixing SF solution with bioglass (BG) sol, instant gelation of silk is induced, the storage modulus of the hydrogel and the compressive modulus of the aerogel are significantly enhanced. The formation of a complex of SF and tetraethyl orthosilicate (TEOS), either through hydrogen bonding or TEOS condensation on SF, facilitated the aggregation of SF and, on the other hand, created active sites for the condensation of TEOS and BG formation on the surface of silk nanofibrils. The resultant hybrid gels have much higher capacity for biomineralization, indicating their higher bioactivity, compared with the pristine silk gels. This organic (SF)-inorganic (BG) mutual nucleation induction and templating can be used for a general approach to produce bioactive silk materials of various formats not limited to gels and may also inspire the formation of other functional protein-BG hybrid materials.

A polydopamine-assisted strontium-substituted apatite coating for titanium promotes osteogenesis and angiogenesis via FAK/MAPK and PI3K/AKT signaling pathways

Early osteointegration is essential for biomedical implants. Surface modifications can significantly compensate for an implant's lack of biocompatibility and osteo-differentiation. They can also be designed to promote angiogenesis in order to assist osteogenesis and ultimately facilitate bone regeneration. In this study, a polydopamine-assisted strontium-substituted apatite coating (Ti@PDA + SrHA) was fabricated on a multifunctional titanium implant to induce both angiogenic and osteogenic abilities for rapid osseointegration. Polydopamine and Sr-substituted hydroxyapatite were coated on the implant through biomineralization. The in vitro results showed that Ti@PDA + SrHA improved cell adhesion and increased the proliferation of rat bone marrow-derived mesenchymal stem cells (rBMSCs) and human umbilical vein endothelial cells (HUVECs). Ti@PDA + SrHA upregulated the expression of ALP activity and osteogenic genes in rBMSCs and elevated angiogenic genes in both rBMSCs and HUVECs. Mechanically, the FAK/MAPK signaling pathway was activated in rBMSCs, and the PI3K/AKT signaling pathway was activated in both rBMSCs and HUVECs. Consistent with these findings, Ti@PDA + SrHA accelerated new bone formation and rapid osseointegration in the femoral condyle implantation study with good stability. Overall, we fabricated a multifunctional biocompatible implant with better angiogenic and osteogenic performance compared to the non-coated implant.

Silk fibroin nanocomposites as tissue engineering scaffolds - A systematic review

Silk fibroin is a protein with intrinsic characteristics that make it a good candidate as a scaffold for tissue engineering. Recent works have enhanced its benefits by adding inorganic phases that interact with silk fibroin in different ways. A systematic review was performed in four databases to study the physicochemical and biological performance of silk fibroin nanocomposites. In the last decade, only 51 articles contained either in vitro cell culture models or in vivo tests. The analysis of such works resulted in their classification into the following scaffold types: particles, mats and textiles, films, hydrogels, sponge-like structures, and mixed conformations. From the physicochemical perspective, the inorganic phase imbued in silk fibroin nanocomposites resulted in better stability and mechanical performance. This review revealed that the inorganic phase may be associated with specific biological responses, such as neovascularisation, cell differentiation, cell proliferation, and antimicrobial and immunomodulatory activity. The study of nanocomposites as tissue engineering scaffolds is a highly active area mostly focused on bone and cartilage regeneration with promising results. Nonetheless, there are still many challenges related to their application in other tissues, a better understanding of the interaction between the inorganic and organic phases, and the associated biological response.

Mineralization of calcium phosphate induced by a silk fibroin film under different biological conditions

Silk fibroin films can have an important effect on the mineralization process of calcium phosphate in different biological environments. There was improvement of MSF with good biocompatibility that are promising in bone tissue engineering.

Biomimetic mineralization of novel hydroxyethyl cellulose/soy protein isolate scaffolds promote bone regeneration in vitro and in vivo

Although various strategies have been utilized to accelerate bone regeneration in bone tissue engineering (BTE), the treatment and repair of large bone defects remains a clinical challenge worldwide. Inspired by the natural extracellular matrix of bone tissue, organic-inorganic composite scaffolds with three-dimensional (3D) porous structures, sufficient mechanical properties, excellent cytocompatibility, osteoconductivity, and osteogenic potential have received considerable attention within the field of bone engineering. In this work, a novel epichlorohydrin (ECH)-crosslinked hydroxyethyl cellulose (HEC)/soy protein isolate (SPI) porous bi-component scaffold (EHSS) with hydroxyapatite (HAp) functionalization (EHSS/HAp) was constructed for bone defect repair via the combination of lyophilization and in situ biomimetic mineralization. Systematic characterization experiments were performed to assess the morphology, HAp-forming properties, mechanical properties and degradation rate of the scaffold. The results indicated that the prepared scaffolds exhibited an interconnected porous structure, a biomimetic HAp coating on their surfaces, improved mechanical properties in compression and a controllable degradation rate. In particular, semiquantitative analysis showed that the calcium/phosphorus (Ca/P) ratio of EHSS/HAp with 70% SPI content (1.65) was similar to that of natural bone tissue (1.67) according to energy dispersive X-ray spectroscopy analysis. In vitro cell culture experiments indicated that the EHSS/HAp with 70% SPI content showed improved cytocompatibility and was suitable for MC3T3-E1 cell attachment, proliferation and growth. Consistently, in vitro osteogenic differentiation studies showed that EHSS/HAp with 70% SPI content can significantly accelerate the expression of osteogenesis-related genes (Col-1, Runx2, OPN, and OCN) during osteogenic differentiation of MC3T3-E1 cells. Furthermore, when applied to the repair of critical-sized cranial defects in a rat model, EHSS/HAp with 70% SPI was capable of significantly promoting tissue regeneration and integration with native bone tissue. Microscopic computed tomography (micro-CT) results demonstrated that the bone defect site was nearly occupied with newly formed bone at 12 weeks after implantation of EHSS/HAp with 70% SPI content into the defect. Hematoxylin and eosin (H&E) staining and Masson's trichrome staining of histological sections further confirmed that EHSS/HAp with 70% SPI markedly promoted new bone formation and maturation. Collectively, our results demonstrate the potential of EHSS/HAp scaffolds with 70% SPI for successful bone defect repair and regeneration.

The Significance and Utilisation of Biomimetic and Bioinspired Strategies in the Field of Biomedical Material Engineering: The Case of Calcium Phosphat-Protein Template Constructs

This review provides a summary of recent research on biomimetic and bioinspired strategies applied in the field of biomedical material engineering and focusing particularly on calcium phosphate-protein template constructs inspired by biomineralisation. A description of and discussion on the biomineralisation process is followed by a general summary of the application of the biomimetic and bioinspired strategies in the fields of biomedical material engineering and regenerative medicine. Particular attention is devoted to the description of individual peptides and proteins that serve as templates for the biomimetic mineralisation of calcium phosphate. Moreover, the review also presents a description of smart devices including delivery systems and constructs with specific functions. The paper concludes with a summary of and discussion on potential future developments in this field.

The effect of biomimetic coating and cuttlebone microparticle reinforcement on the osteoconductive properties of cellulose-based scaffolds

Polymer-based scaffolds have already gained popularity in many biomedical applications due to convenient routes for fabrication and favourable structural, physicochemical and functional characteristics. However, polymeric scaffolds lack osteoconductivity and some synthetic polymers carry the risk of inflammatory response caused by degradation by-products. Those facts limit their practical use in bone tissue engineering. In this study, three-dimensional (3D) porous scaffolds from naturally derived polymer, namely regenerated cellulose, were prepared using a non-hydrolytic sol-gel and lyophilization techniques. To induce osteoconductive properties of the polymeric scaffolds, cuttlebone microparticles were immobilized and the surface coating was achieved via in vitro mineralization using 10-fold concentrated simulated body fluid (10x SBF). Biogenic activity of cuttlebone is explained by its chemical composition, which includes polysaccharide β-chitin and macro-, micro- and trace elements favourable for mineralization. Parallel the scaffolds were examined during long-term (24 weeks) in vitro mineralization in 1x SBF for the purpose to investigate apatite-forming ability of the scaffolds. A nice cauliflower-like structures and needle-like dents of the spherical aggregates, which are characteristic to hydroxyapatite precursors, were observed on the surface of cellulose/cuttlebone scaffolds by SEM. 10x SBF coating enhanced cell attachment to the scaffolds because SBF elements are known to increase bioactivity by inducing re-deposition of carbonate apatite crystallites on scaffold surface. Additionally, calcium and phosphate depositions were clearly observed on the developed scaffolds using von Kossa and Alizarin Red S staining. Proliferative and osteoconductive effects on the osteoblast-like MG-63 cells demonstrate the cellulose/cuttlebone scaffolds soaked in 10x SBF as a favourable material for bone tissue engineering.

Design, Fabrication, and Function of Silk-Based Nanomaterials

Animal silks are built from pure protein components and their mechanical performance, such as strength and toughness, often exceed most engineered materials. The secret to this success is their unique nanoarchitectures that are formed through the hierarchical self-assembly of silk proteins. This natural material fabrication process in sharp contrast to the production of artificial silk materials, which usually are directly constructed as bulk structures from silk fibroin (SF) molecular. In recent years, with the aim of understanding and building better silk materials, a variety of fabrication strategies have been designed to control nanostructures of silks or to create functional materials from silk nanoscale building blocks. These emerging fabrication strategies offer an opportunity to tailor the structure of SF at the nanoscale and provide a promising route to produce structurally and functionally optimized silk nanomaterials. Here, we review the critical roles of silk nanoarchitectures on property and function of natural silk fibers, outline the strategies of utilization of these silk nanobuilding blocks, and we provide a critical summary of state of the art in the field to create silk nanoarchitectures and to generate silk-based nanocomponents. Further, such insights suggest templates to consider for other materials systems.

Fabrication of hybrid scaffold based on hydroxyapatite-biodegradable nanofibers incorporated with liposomal formulation of BMP-2 peptide for bone tissue engineering

In the present study, we fabricated an efficient, simple biomimetic scaffold to stimulate osteogenic differentiation of mesenchymal stem cells (MSCs). Electrospun poly L-lactic acid nanofibers were employed to mimic the nanofibrillar structure of bone proteins and coated with hydroxyapatite nanoparticles to simulate bone minerals. Thereafter, we regulated the release pattern of BMP-2 peptide through covalent attachment of an optimized liposomal formulation to the scaffold. The fabricated platform provided a sustained release profile of BMP-2 peptide up to 21 days while supporting cellular attachment and proliferation without cytotoxicity. In-vitro results confirmed the superiority of the scaffold containing liposomes through enhancement of growth and differentiation of MSCs. Ectopic bone formation model exhibited significant localized initiation of bone formation of liposome incorporated scaffold. Consequently, these findings demonstrated that our designed platform with modified release properties of BMP-2 peptide considerably promoted osteogenic differentiation of MSCs making it a unique candidate for bone regeneration therapeutics.

Biomineralization of Fucoidan-Peptide Blends and Their Potential Applications in Bone Tissue Regeneration

Fucoidan (Fuc), a natural polysaccharide derived from brown seaweed algae, and gelatin (Gel) were conjugated to form a template for preparation of biomimetic scaffolds for potential applications in bone tissue regeneration. To the Fuc-Gel we then incorporated the peptide sequence MTNYDEAAMAIASLN (MTN) derived from the E-F hand domain, known for its calcium binding properties. To mimic the components of the extracellular matrix of bone tissue, the Fuc-Gel-MTN assemblies were incubated in simulated body fluid (SBF) to induce biomineralization, resulting in the formation of β-tricalcium phosphate, and hydroxyapatite (HAp). The formed Fuc-Gel-MTN-beta-TCP/HAP scaffolds were found to display an average Young's Modulus value of 0.32 GPa (n = 5) with an average surface roughness of 91 nm. Rheological studies show that the biomineralized scaffold exhibited higher storage and loss modulus compared to the composites formed before biomineralization. Thermal phase changes were studied through DSC and TGA analysis. XRD and EDS analyses indicated a biphasic mixture of β-tricalcium phosphate and hydroxyapatite and the composition of the scaffold. The scaffold promoted cell proliferation, differentiation and displayed actin stress fibers indicating the formation of cell-scaffold matrices in the presence of MT3C3-E1 mouse preosteoblasts. Osteogenesis and mineralization were found to increase with Fuc-Gel-MTN-beta-TCP/HAP scaffolds. Thus, we have developed a novel scaffold for possible applications in bone tissue engineering.

Biomimetic Mineralization of Biomaterials Using Simulated Body Fluids for Bone Tissue Engineering and Regenerative Medicine<sup/>

Development of synthetic biomaterials imbued with inorganic and organic characteristics of natural bone that are capable of promoting effective bone tissue regeneration is an ongoing goal of regenerative medicine. Calcium phosphate (CaP) has been predominantly utilized to mimic the inorganic components of bone, such as calcium hydroxyapatite, due to its intrinsic bioactivity and osteoconductivity. CaP-based materials can be further engineered to promote osteoinductivity through the incorporation of osteogenic biomolecules. In this study, we briefly describe the microstructure and the process of natural bone mineralization and introduce various methods for coating CaP onto biomaterial surfaces. In particular, we summarize the advantages and current progress of biomimetic surface-mineralizing processes using simulated body fluids for coating bone-like carbonated apatite onto various material surfaces such as metals, ceramics, and polymers. The osteoinductive effects of integrating biomolecules such as proteins, growth factors, and genes into the mineral coatings are also discussed.

Silk Fibroin-Alginate-Hydroxyapatite Composite Particles in Bone Tissue Engineering Applications In Vivo

The aim of this study was to evaluate the in vivo bone regeneration capability of alginate (AL), AL/hydroxyapatite (HA), and AL/HA/silk fibroin (SF) composites. Forty Sprague Dawley rats were used for the animal experiments. Central calvarial bone (diameter: 8.0 mm) defects were grafted with AL, AL/HA, or AL/HA/SF. New bone formation was evaluated by histomorphometric analysis. To demonstrate the immunocompatibility of each group, the level of tumor necrosis factor (TNF)-α expression was studied by immunohistochemistry (IHC) and quantitative reverse transcription polymerase chain reaction (qRT-PCR) at eight weeks post implantation. Additionally, osteogenic markers, such as fibroblast growth factor (FGF)-23, osteoprotegerin (OPG), and Runt-related transcription factor (Runx2) were evaluated by qPCR or IHC at eight weeks post implantation. The AL/HA/SF group showed significantly higher new bone formation than did the control group (p = 0.044) and the AL group (p = 0.035) at four weeks post implantation. Additionally, the AL/HA/SF group showed lower relative TNF-α mRNA levels and higher FGF-23 mRNA levels than the other groups did at eight weeks post implantation. IHC results demonstrated that the AL/HA/SF group had lower TNF-α expression and higher OPG and Runx2 expression at eight weeks post implantation. Additionally, no evidence of the inflammatory reaction or giant cell formation was observed around the residual graft material. We concluded that the AL/HA/SF composite could be effective as a scaffold for bone tissue engineering.