Dissolving Microneedle Systems for the Oral Mucosal Delivery of Triamcinolone Acetonide to Treat Aphthous Stomatitis

Evaluation of EMLA cream with microneedle patches in palatal anesthesia in children: a randomized controlled clinical trial

Palatal injections are considered to be one of the most painful dental procedures. As a result, it was important to find alternatives to this painful injection to improve children's cooperation. The dental literature mentioned using EMLA cream as a possible alternative to conventional injections, but its anesthetic effect was debated. Therefore, it was valuable to research the impact of microneedle patches to enhance the effectiveness of this cream. The purpose of this randomized controlled clinical trial was to compare the effectiveness of different methods of anesthesia and pain levels in children aged 7-11 years. The study compared the use of EMLA cream, EMLA with microneedles, and conventional palatal injections. A total of 90 children were randomly assigned to three groups: Group 1 received conventional palatal anesthesia (control), Group 2 received EMLA cream only, and Group 3 received EMLA with microneedles. Pain levels were assessed using the FLACC and Wong-Baker scales at three different time points: T1(during anesthesia), T2(on palatal probing), and T3(during extraction). The FLACC scale revealed a significant difference in pain between groups only at T1 (P value = 0.000). It was found that the conventional palatal injection group had a higher pain level than the EMLA cream-only group and the group using microneedle patches with EMLA cream (P value = 0.000). However, the other groups did not show significant differences in pain levels during the anesthesia (P value  = 1.00). Similarly, the Wong-Baker scale also demonstrated a statistically significant difference in pain between groups only at T1 (P value  = 0.000). It was found that the conventional palatal injection group had a higher pain level than the EMLA cream-only group and the group using microneedle patches with EMLA cream (P value  = 0.000). However, the other groups did not show significant differences in pain levels during the anesthesia (P value  = 0.091). The study concludes that both EMLA cream alone and EMLA with microneedles can be used as an alternative to conventional palatal anesthesia for children.

Emerging polymeric materials for treatment of oral diseases: design strategy towards a unique oral environment

Oral diseases are prevalent but challenging diseases owing to the highly movable and wet, microbial and inflammatory environment. Polymeric materials are regarded as one of the most promising biomaterials due to their good compatibility, facile preparation, and flexible design to obtain multifunctionality. Therefore, a variety of strategies have been employed to develop materials with improved therapeutic efficacy by overcoming physicobiological barriers in oral diseases. In this review, we summarize the design strategies of polymeric biomaterials for the treatment of oral diseases. First, we present the unique oral environment including highly movable and wet, microbial and inflammatory environment, which hinders the effective treatment of oral diseases. Second, a series of strategies for designing polymeric materials towards such a unique oral environment are highlighted. For example, multifunctional polymeric materials are armed with wet-adhesive, antimicrobial, and anti-inflammatory functions through advanced chemistry and nanotechnology to effectively treat oral diseases. These are achieved by designing wet-adhesive polymers modified with hydroxy, amine, quinone, and aldehyde groups to provide strong wet-adhesion through hydrogen and covalent bonding, and electrostatic and hydrophobic interactions, by developing antimicrobial polymers including cationic polymers, antimicrobial peptides, and antibiotic-conjugated polymers, and by synthesizing anti-inflammatory polymers with phenolic hydroxy and cysteine groups that function as immunomodulators and electron donors to reactive oxygen species to reduce inflammation. Third, various delivery systems with strong wet-adhesion and enhanced mucosa and biofilm penetration capabilities, such as nanoparticles, hydrogels, patches, and microneedles, are constructed for delivery of antibiotics, immunomodulators, and antioxidants to achieve therapeutic efficacy. Finally, we provide insights into challenges and future development of polymeric materials for oral diseases with promise for clinical translation.

Microneedle patches containing mesoporous polydopamine nanoparticles loaded with triamcinolone acetonide for the treatment of oral mucositis

Oral mucositis (OM) is the most common disease of the oral mucosa, which affects people's daily production and life. Triamcinolone ointment is the common clinical drug for OM treatment. However, the hydrophobic properties of triamcinolone acetonide (TA) and the complex microenvironment of the oral cavity led to its low bioavailability and unstable therapeutic effects on ulcer wounds. Herein, dissolving microneedle patches (MNs) composed of mesoporous polydopamine nanoparticles (MPDA) loaded with TA (TA@MPDA), sodium hyaluronic acid (HA), and Bletilla striata polysaccharide (BSP) are prepared as the transmucosal delivery system. The prepared TA@MPDA-HA/BSP MNs exhibit well-arranged microarrays, high mechanical strength and fast solubility (<3 min) properties. In addition, the hybrid structure improves the biocompatibility of TA@MPDA and expedites oral ulcer healing in the SD rat model through the synergistic anti-inflammatory and pro-healing effects of microneedle ingredients (hormones, MPDA and Chinese herbs extracts), with 90% less amount of TA compared with Ning Zhi Zhu^®. TA@MPDA-HA/BSP MNs are shown to be their great potential as novel ulcer dressings for OM management.

Composite dissolvable microneedle patch for therapy of oral mucosal diseases

A composite microneedle patch (MN patch) is developed for oral transmucosal administration. To improve the oral transmucosal drug delivery efficiency, the composite MN patch is designed to consist of an array of 100 dissolvable microneedles (MNs) with drug-loaded tips and a backing layer. The MNs are composed of two parts, the hyaluronic acid (HA) tip part and the polyvinylpyrrolidone (PVP) base part. Due to the small size and sufficient mechanical strength, the HA-PVP MNs can painlessly penetrate the oral mucosa barrier and deliver drugs directly to the basal layer or submucosa. Betamethasone sodium phosphate (BSP), as the model drug, is concentrated in the HA tip parts to avoid the drug waste caused by mucosa elasticity. Considering the special moist environment and saliva flow in the mouth, a double-layer backing layer composed of a poly(vinyl alcohol) (PVA) adhesive layer and an ethyl cellulose (EC) waterproof layer is designed and constructed, which could reduce the saliva flow effects. The in vitro and in vivo results demonstrate that the MN patch could achieve rapid and efficient BSP release in oral mucosa due to the rapid dissolution of HA. The proposed MN patch provides a novel strategy for the therapy of oral mucosal diseases.

Preparation of triamcinolone acetonide-loaded chitosan/fucoidan hydrogel and its potential application as an oral mucosa patch

Oral inflammatory diseases (OIDs) are among the most common lesions in the oral cavity, affecting the quality of human life and even causing oral cancer. However, most of the current oral mucosa patches still have some limitations, particularly instant, poor mechanical strength and conformability, low adhesion to tissue, and foreign body sensation. Herein, triamcinolone acetonide (TA)-loaded chitosan/fucoidan (CF) composite hydrogels were prepared via chemical crosslinking. The macro/microscopic morphologies and (bio)physicochemical properties of composite hydrogels were investigated. Incorporating fucoidan in chitosan hydrogels greatly enhanced their swelling behavior, mechanical strength, and adhesion properties. Further, the addition of TA in CF hydrogels improved their elastic feature, inhibited inflammatory response, and promoted the formation of mature and well-organized collagen fibers. The developed composite hydrogels displayed not only good antibacterial properties but also good cytocompatibility and histocompatibility. Thus, the designed hydrogels allow the development of oral mucosa patches as a potential treatment for OIDs.

High-Dose Steroid Dissolving Microneedle for Relieving Atopic Dermatitis

Dissolving microneedles (DMN) supplemented with therapeutic molecules have been developed to enhance transdermal delivery efficiency of topically applied drugs in a minimally invasive manner. However, the dose of the drugs in DMN system is limited owing to the low solubility of drug. In fact, although triamcinolone acetonide (TA) is one of the most widely prescribed drugs for relieving atopic dermatitis (AD), its poor dissolving nature makes it difficult to design and fabricate DMN containing therapeutic dosage of TA. In this study, TA suspension is introduced to encapsulate therapeutic dosage of TA. Sonication and composition optimization of polymers is key to fabricate high dose TA-DMN to induce particle size reduction and dispersion stability of suspension, respectively. After confirming the physical performance of TA-DMN using the selected formulation in vitro, the anti-inflammatory effects of TA-DMN are evaluated in vivo using a mouse model affected with skin inflammation to mimic AD in humans. Herein, high-dose TA-DMN is presented as a candidate agent for relieving AD and, furthermore, for wide application in the treatment of skin inflammatory diseases in which high-dose steroid drugs are required.

Ovalbumin and cholera toxin delivery to buccal mucus for immunization using microneedles and comparison of immunological response to transmucosal delivery

The oral mucosa is an effective site for vaccination. However, for oral mucosal vaccines, delivery of the right dose of vaccine is not possible due to the water-rich environment. In this study, the buccal mucosa, which is easy to access using a microneedle array in the oral cavity, was selected as the administration site. The immune responses to the use of microneedles to conventional transmucosal delivery were compared. In addition, the adjuvant effect of the addition of cholera toxin (CT) to the drug formulation was observed. Two kinds of patches were prepared: (1) Ovalbumin (OVA) was dip coated only on the tips of microneedles (C-OVA-MN) and (2) OVA was coated on the surface of a flat disk patch substrate without microneedles (C-OVA-D). The drug delivery properties of C-OVA-MN and C-OVA-D were investigated using fluorescent-labeled OVA (OVA/FITC). Each patch was administered to mice twice, 2 weeks apart, and then antibody titers were measured. A microneedle patch can deliver vaccine into the epithelium of the buccal mucosa in a short period of time compared to transmucosal delivery. A microneedle system of C-OVA-MN showed a high serum IgG titer. In addition, CT triggered CD8⁺ and CD4⁺ T cell-mediated immune responses. Through this study, we present the possibility of a new method of vaccination to the buccal mucosa using microneedles and CT adjuvant. Illustration of delivery of vaccine to the oral mucosal epithelium using a microneedle patch: Ovalbumin (OVA)-coated microneedle (C-OVA-MN) consists of tip, step, and coating formulation. Microneedle patch coated with OVA formulation is targeting buccal mucosa, which is easy to access in the oral cavity. OVA is delivered to the buccal epithelium precisely using a microneedle patch, and OVA is delivered by transmucosal route using a disk patch.

Supramolecular aggregates of cyclodextrins with co-solvent modulate drug dispersion and release behavior of poorly soluble corticosteroid from chitosan membranes

In this study, the ability of different beta-cyclodextrins to facilitate homogeneous dispersion of triamcinolone acetonide (TA) into chitosan membranes is assessed. Drug loading was assessed through atomic force microscopy (AFM), scanning electron microscopy (MEV-FEG), and X-ray diffraction analyses. Drug interactions with the co-polymer were investigated with Fourier transform infrared spectroscopy, thermal analyses. Swelling assay, and in vitro drug release experiment were used to assess TA release behavior. Undispersed particles of drug were observed to remain in the simple chitosan membranes. Hydroxypropyl-β-cyclodextrin enabled the dispersion of TA into chitosan membranes and subsequent sustained drug release. In addition, the membrane performance as a drug delivery device is improved by adding specified amounts of the co-solvent triethanolamine. The experimental data presented in this study confirm the utility of our novel and alternative approach for obtaining a promising device for slow and controlled release of glucocorticoids, such as triamcinolone acetonide, for topical ulcerations.

Microneedle-Based Delivery: An Overview of Current Applications and Trends

Microneedle arrays (MNA) are considered as one of the most promising resources to achieve systemic effects by transdermal delivery of drugs. They are designed as a minimally invasive, painless system which can bypass the stratum corneum, overcoming the potential drawbacks of subcutaneous injections and other transdermal delivery systems such as chemical enhancers, nano and microparticles, or physical treatments. As a trendy field in pharmaceutical and biomedical research, its applications are constantly evolving, even though they are based on very well-established techniques. The number of molecules administered by MNA are also increasing, with insulin and vaccines administration being the most investigated. Furthermore, MNA are being used to deliver cells and applied in other organs and tissues like the eyes and buccal mucosae. This review intends to offer a general overview of the current state of MNA research, focusing on the strategies, applications, and types of molecules delivered recently by these systems. In addition, some information about the materials and manufacturing processes is presented and safety data is discussed.