A Brief Review of Self-Healing Polyurethane Based on Dynamic Chemistry

Biodegradable poly(lactic acid) blocked polyurethane/carbon nanotubes coated cotton fabric prepared by ultrasonic-assisted inkjet printing for high performance strain sensors

In order to fulfill the demands for degradability, a broad working range, and heightened sensitivity in flexible sensors, biodegradable polyurethane (BTPU) was synthesized and combined with CNTs to produce BTPU/CNTs coated cotton fabric using an ultrasonic-assisted inkjet printing process. The synthesized BTPU displayed a capacity for degradation in a phosphate buffered saline solution, resulting in a weight loss of 25 % after 12 weeks of degradation. The BTPU/CNTs coated cotton fabric sensor achieved an extensive strain sensing range of 0-137.5 %, characterized by high linearity and a notable sensitivity (gauge factor (GF) of 126.8). Notably, it demonstrated a low strain detection limit (1 %), rapid response (within 280 ms), and robust durability, enabling precise monitoring of both large and subtle human body movements such as finger, wrist, neck, and knee bending, as well as swallowing. Moreover, the BTPU/CNTs coated cotton fabric exhibited favorable biocompatibility with human epidermis, enabling potential applications as wearable skin-contact sensors. This work provides insight into the development of degradable and high sensing performance sensors suitable for applications in electronic skins and health monitoring devices.

Viscoelasticity‐Controlled Relaxation in Wrinkling Surface for Multistage Time‐Resolved Optical Information Encryption

As counterfeit techniques continue to evolve, ensuring the security of conventional "static" encryption methods becomes increasingly challenging. Here, the viscoelasticity-controlled relaxation is introduced for the first time in a bilayer wrinkling system by regulating the density of hydrogen bond networks in polymer to construct a "dynamic" encryption material. The wrinkling surface can manipulate light during the dynamic relaxation process, exhibiting three stages with frosted glass, structural color, and mirror reflection. By regulating the viscoelasticity of skin layer through UV irradiation, the wavelength and the relaxation rate of the wrinkles can be controlled. As a result, dynamic wrinkling anti-counterfeiting patterns and time-resolved multistage information encryption are achieved. Crucially, the encryption material is developed as an anti-counterfeiting label for packing boxes in daily applications, allowing the encrypted information to be activated manually and identified by naked eyes, surpassing the existing time-resolved encryption materials in utilization potential. Besides, the dynamic hydrogen bond networks are extended to various dynamic interaction networks, demonstrating the versatility of the dynamic encryption strategy. This work not only provides an additional dimension for dynamic information encryption in daily practical use, but also offers theoretical guidance for the development of advanced optical anti-counterfeiting and smart display materials in the future.

Highly Self-Healable Polymeric Coating Materials Based on Charge Transfer Complex Interactions with Outstanding Weatherability

In this study, we prepare highly self-healable polymeric coating materials using charge transfer complex (CTC) interactions. The resulting coating materials demonstrate outstanding thermal stability (1 wt% loss thermal decomposition temperature at 420 °C), rapid self-healing kinetics (in 5 min), and high self-healing efficiency (over 99%), which is facilitated by CTC-induced multiple interactions between the polymeric chains. In addition, these materials exhibit excellent optical properties, including transmittance over 91% and yellow index (YI) below 2, and show enhanced weatherability with a ΔYI value below 0.5 after exposure to UV light for 72 h. Furthermore, the self-healable coating materials developed in this study show outstanding mechanical properties by overcoming the limitations of conventional self-healing materials.

Properties and Applications of Self-Healing Polymeric Materials: A Review

Self-healing polymeric materials, engineered to autonomously self-restore damages from external stimuli, are at the forefront of sustainable materials research. Their ability to maintain product quality and functionality and prolong product life plays a crucial role in mitigating the environmental burden of plastic waste. Historically, initial research on the development of self-healing materials has focused on extrinsic self-healing systems characterized by the integration of embedded healing agents. These studies have primarily focused on optimizing the release of healing agents and ensuring rapid self-healing capabilities. In contrast, recent advancements have shifted the focus towards intrinsic self-healing systems that utilize their inherent reactivity and interactions within the matrix. These systems offer the advantage of repeated self-healing over the same damaged zone, which is attributed to reversible chemical reactions and supramolecular interactions. This review offers a comprehensive perspective on extrinsic and intrinsic self-healing approaches and elucidates their unique properties and characteristics. Furthermore, various self-healing mechanisms are surveyed, and insights from cutting-edge studies are integrated.

Construction and mechanism study of lignin-based polyurethane with high strength and high self-healing properties

Lignin is a natural polymer with abundant functional groups with great application prospects in lignin-based polyurethane elastomers with self-healing abilities. In this study, a lignin self-healing polyurethane (PUDA-L) was specially designed using lignin as the raw material of polyurethane, combining lignin with Diels-Alder (DA) bond and hydrogen bonds. The experimental results showed that PUDA-L was prepared with good thermal stability, fatigue resistance, shape memory effect, excellent mechanical strength, and self-healing ability by partially replacing the crosslinking agents with bio-based lignin and hydroxylated modified lignin to increase the hydroxyl content. Polyurethane has a tensile strength of up to 29 MPa and an elongation at break of up to 500 %. The excellent self-healing ability of PUDA-L originates from the internal DA bonds and cross-linked hydrogen bonds. After the dumbbell sample was fused and heated at 130 °C for 4 h, the elastomer could be completely healed, the tensile strength was restored to 29 MPa, and the self-healing efficiency was up to 100 %. The developed PUDA-L elastomer has promising applications in sensors and smart skins.

Development of Polyurethane/Peptide-Based Carriers with Self-Healing Properties

In situ-forming gels with self-assembling and self-healing properties are materials of high interest for various biomedical applications, especially for drug delivery systems and tissue regeneration. The main goal of this research was the development of an innovative gel carrier based on dynamic inter- and intramolecular interactions between amphiphilic polyurethane and peptide structures. The polyurethane architecture was adapted to achieve the desired amphiphilicity for self-assembly into an aqueous solution and to facilitate an array of connections with peptides through physical interactions, such as hydrophobic interactions, dipole-dipole, electrostatic, π–π stacking, or hydrogen bonds. The mechanism of the gelation process and the macromolecular conformation in water were evaluated with DLS, ATR-FTIR, and rheological measurements at room and body temperatures. The DLS measurements revealed a bimodal distribution of small (~30–40 nm) and large (~300–400 nm) hydrodynamic diameters of micelles/aggregates at 25 °C for all samples. The increase in the peptide content led to a monomodal distribution of the peaks at 37 °C (~25 nm for the sample with the highest content of peptide). The sol–gel transition occurs very quickly for all samples (within 20–30 s), but the equilibrium state of the gel structure is reached after 1 h in absence of peptide and required more time as the content of peptide increases. Moreover, this system presented self-healing properties, as was revealed by rheological measurements. In the presence of peptide, the structure recovery after each cycle of deformation is a time-dependent process, the recovery is complete after about 300 s. Thus, the addition of the peptide enhanced the polymer chain entanglement through intermolecular interactions, leading to the preparation of a well-defined gel carrier. Undoubtedly, this type of polyurethane/peptide-based carrier, displaying a sol–gel transition at a biologically relevant temperature and enhanced viscoelastic properties, is of great interest in the development of medical devices for minimally invasive procedures or precision medicine.

Self-Healing Superwetting Surfaces, Their Fabrications, and Properties

The research on superwetting surfaces with a self-healing function against various damages has progressed rapidly in the recent decade. They are expected to be an effective approach to increasing the durability and application robustness of superwetting materials. Various methods and material systems have been developed to prepare self-healing superwetting surfaces, some of which mimic natural superwetting surfaces. However, they still face challenges, such as being workable only for specific damages, external stimulation to trigger the healing process, and poor self-healing ability in the water, marine, or biological systems. There is a lack of fundamental understanding as well. This article comprehensively reviews self-healing superwetting surfaces, including their fabrication strategies, essential rules for materials design, and self-healing properties. Self-healing triggered by different external stimuli is summarized. The potential applications of self-healing superwetting surfaces are highlighted. This article consists of four main sections: (1) the functional surfaces with various superwetting properties, (2) natural self-healing superwetting surfaces (i.e., plants, insects, and creatures) and their healing mechanism, (3) recent research development in various self-healing superwetting surfaces, their preparation, wetting properties in the air or liquid media, and healing mechanism, and (4) the prospects including existing challenges, our views and potential solutions to the challenges, and future research directions.

Supramolecular Crystal Networks Constructed from Cucurbit[8]uril with Two Naphthyl Groups

Naphthyl groups are widely used as building blocks for the self-assembly of supramolecular crystal networks. Host-guest complexation of cucurbit[8]uril (Q[8]) with two guests NapA and Nap1 in both aqueous solution and solid state has been fully investigated. Experimental data indicated that double guests resided within the cavity of Q[8], generating highly stable homoternary complexes NapA₂@Q[8] and Nap1₂@Q[8]. Meanwhile, the strong hydrogen-bonding and π···π interaction play critical roles in the formation of 1D supramolecular chain, as well as 2D and 3D networks in solid state.

Highly Self-Healable Polymeric Coating Materials with Enhanced Mechanical Properties Based on the Charge Transfer Complex

Polymeric coating materials (PCMs) are promising candidates for developing next-generation flexible displays. However, PCMs are frequently subjected to external stimuli, making them highly susceptible to repeated damage. Therefore, in this study, a highly self-healing PCM based on a charge transfer complex (CTC) was developed, and its thermal, self-healing, and mechanical properties were examined. The self-healing material demonstrated improved thermal stability, fast self-healing kinetics (1 min), and a high self-healing efficiency (98.1%) via CTC-induced multiple interactions between the polymeric chains. In addition, it eliminated the trade-off between the mechanical strength and self-healing capability that is experienced by typical self-healing materials. The developed PCM achieved excellent self-healing and superior bulk (in-plane) and surface (out-of-plane) mechanical strengths compared to those of conventional engineering plastics such as polyether ether ketone (PEEK), polysulfone (PSU), and polyethersulfone (PES). These remarkable properties are attributed to the unique intermolecular structure resulting from strong CTC interactions. A mechanism for the improved self-healing and mechanical properties was also proposed by comparing the CTC-based self-healing PCMs with a non-CTC-based PCM.

Bio-Based Healable 2K PU Textile Coating for Durable Applications

A biobased healable 2K polyurethane (PU) coating incorporating a Schiff base was synthesized and applied as a thin coating on textiles. The Schiff base, made out of cystine and vanillin, contained reversible imine and disulfide bonds and was used as a chain extender in PU synthesis. The FT-IR analysis indicated the successful incorporation of the Schiff base in the PU backbone. Compared with control PU coatings, the healable bio-based PU coating with the Schiff base showed very good healing properties using heat as external stimuli: a healing recovery of 75% was obtained after applying a 2 N scratch and complete recovery of the resistance to hydrostatic pressure. SEM analysis revealed complete closure of the scratch after healing for 30 min at 90 °C. The healing properties are attributed to the synergy of the dual-dynamic metatheses of the imine and disulfide bonds.

Recent advances in dynamic covalent bond-based shape memory polymers

Dynamic covalent bond-based shape memory polymers (DCB-SMPs) are one of most important SMPs which have a wide potential application prospect. Different from common strong covalent bonds, DCBs own relatively weak bonding energy, similarly to the supramolecular interactions of noncovalent bonds, and can dynamically combine and dissociate these bonds. DCB-SMP solids, which can be designed to respond for different stimuli, can provide excellent self-healing, good reprocessability, and high mechanical performance, because DCBs can obtain dynamic cross-linking without sacrificing ultrahigh fixing rates. Furthermore, besides DCB-SMP solids, DCB-SMP hydrogels with responsiveness to various stimuli also have been developed recently, which have special biocompatible soft/wet states. Particularly, DCB-SMPs can be combined with emerging 3D-printing techniques to design various original shapes and subsequently complex shape recovery. This review has summarized recent research studies about SMPs based on various DCBs including DCB-SMP solids, DCB-SMP hydrogels, and the introduction of new 3D-printing techniques using them. Last but not least, the advantages/disadvantages of different DCB-SMPs have been analyzed via polymeric structures and the future development trends in this field have been predicted.