Dosimetric validation of the Theragenics AgX-100® I-125 seed for ROPES eye plaque brachytherapy

Heterogeneous physical phantom for I-125 dose measurements and dose-to-medium determination

PURPOSE

In this paper we present a further step in the implementation of a physical phantom designed to generate sets of "true" independent reference data as requested by TG-186, intending to address and mitigate the scarcity of experimental studies on brachytherapy (BT) validation in heterogeneous media. To achieve this, we incorporated well-known heterogeneous materials into the phantom in order to perform measurements of 125I dose distribution. The work aims to experimentally validate Monte Carlo (MC) calculations based on MBDCA and determine the conversion factors from LiF response to absorbed dose in different media, using cavity theory.

METHODS AND MATERIALS

The physical phantom was adjusted to incorporate tissue equivalent materials, such as: adipose tissue, bone, breast and lung with varying thickness. MC calculations were performed using MCNP6.2 code to calculate the absorbed dose in the LiF and the dose conversion factors (DCF).

RESULTS

The proposed heterogeneous phantom associated with the experimental procedure carried out in this work yielded accurate dose data that enabled the conversion of the LiF responses into absorbed dose to medium. The results showed a maximum uncertainty of 6.92 % (k = 1), which may be considered excellent for dosimetry with low-energy BT sources.

CONCLUSIONS

The presented heterogeneous phantom achieves the required precision in dose evaluations due to its easy reproducibility in the experimental setup. The obtained results support the dose conversion methodology for all evaluated media. The experimental validation of the DCF in different media holds great significance for clinical procedures, as it can be applied to other tissues, including water, which remains a widely utilized reference medium in clinical practice.

Radio-luminescent imaging for rapid, high-resolution eye plaque loading verification

BACKGROUND

Eye plaque brachytherapy is currently an optimal therapy for intraocular cancers. Due to the lack of an effective and practical technique to measure the seed radioactivity distribution, current quality assurance (QA) practice according to the American Association of Physicists in Medicine TG129 only stipulates that the plaque assembly be visually inspected. Consequently, uniform seed activity is routinely adopted to avoid possible loading mistakes of differential seed loading. However, modulated dose delivery, which represents a general trend in radiotherapy to provide more personalized treatment for a given tumor and patient, requires differential activities in the loaded seeds.

PURPOSE

In this study, a fast and low-cost radio-luminescent imaging and dose calculating system to verify the seed activity distribution for differential loading was developed.

METHODS

A proof-of-concept system consisting of a thin scintillator sheet coupled to a camera/lens system was constructed. A seed-loaded plaque can be placed directly on the scintillator surface with the radioactive seeds facing the scintillator. The camera system collects the radioluminescent signal generated by the scintillator on its opposite side. The predicted dose distribution in the scintillator's sensitive layer was calculated using a Monte Carlo simulation with the planned plaque loading pattern of I-125 seeds. Quantitative comparisons of the distribution of relative measured signal intensity and that of the relative predicted dose in the sensitive layer were performed by gamma analysis, similar to intensity-modulated radiation therapy QA.

RESULTS

Data analyses showed high gamma (3%/0.3 mm, global, 20% threshold) passing rates for correct seed loadings and low passing rates with distinguished high gamma value area for incorrect loadings, indicating that possible errors may be detected. The measurement and analysis only required a few extra minutes, significantly shorter than the time to assay the extra verification seeds the physicist already must perform as recommended by TG129.

CONCLUSIONS

Radio-luminescent QA can be used to facilitate and assure the implementation of intensity-modulated, customized plaque loading.

THERMOLUMINESCENCE DOSIMETRY (TLD) IN MEDICINE: FIVE 'W'S AND ONE HOW

Thermoluminescence dosimetry (TLD) has a long history of applications in medicine. However, despite its versatility and sensitivity its use is anecdotally diminishing, at least in part due to the complexity and work intensity of a quality TLD service. The present paper explores the role of TLD in medicine using a common inquiry methodology (5W1H) which systematically asks 'Who, What, When, Where, Why and How' to identify what role TLD could and should play in medical applications.

A novel quality assurance system for eye plaque brachytherapy

Eye Plaque brachytherapy pre-treatment quality assurance (QA) conducted clinically involves an activity verification of individual seeds via well chamber and does not include a physical measurement of dose-rate of the final assembly. A novel spectroscopic, dose-rate detection system, was evaluated for pre-treatment QA of eye plaque brachytherapy. The system includes a water phantom with sterility management. The system was calibrated using a known-activity I-125 seed, measured at 1 cm in water along the radial axis, compared to TG-43 U1 calculations and verified over a number of distances. A depth dose curve was acquired for a clinical, mixed activity eye plaque and two 'error' plaques. The probe was stepped from a water equivalent source to a detector distance (SDD) of 2.5 to 12 mm along the plaque central axis. The latter measurements aimed to characterise the sensitivity of the system. The calculated and measured single-seed dose-rates agreed to within 0.5 cGy/h from a SDD of 3 mm and above. The clinical plaque showed agreement between measured and treatment planning system (TPS) calculated dose-rates within 2%. Sensitivity testing resulted in a maximum deviation from TPS data of 18%, therefore was able to detect the presence of packing errors. The dose-rate detection system was successfully evaluated for verification of I-125 based eye plaques without compromising sterility, allowing for quick pre-treatment, dose-rate verification of patient-ready plaques. Its agreement with TPS data for the unmodified plaque and its deviation when introducing errors confirms the approach suggested is a viable QA tool.