In Vivo Red Blood Cells/Plasma Partition Coefficient of Treosulfan and Its Active Monoepoxide in Rats

The discovery of berberine erythrocyte-hemoglobin self-assembly delivery system: a neglected carrier underlying its pharmacokinetics

Berberine (BBR) has extremely low concentration and high tissue distribution. However, current pharmacokinetic studies predominantly focus on its concentration in plasma, which could hardly make a comprehensive understanding of its pharmacokinetic process. This study made a pioneering endeavor to explore the erythrocyte-hemoglobin (Hb) self-assembly system of BBR by exploring the interaction of BBR with erythrocyte and the combination of BBR with Hb. Results showed that BBR had a low bioavailability (C₀ = 2.833 μg/mL via intravenous administration of 2.5 mg/kg BBR and C_max = 0.260 μg/mL via oral administration of 400 mg/kg BBR). Besides, BBR achieved higher concentrations in erythrocytes than plasma, and the erythrocytes count and Hb content were significantly decreased after intravenous administration. Hemolysis rate indicated the BBR-erythrocyte system (with 2% erythrocytes) was relatively stable without hemolysis at the concentration of 1.00 mg/mL. And the maximum percentage of drug loading was 100% when the BBR-erythrocyte concentration was 0.185 μg/mL. Furthermore, incubation of BBR and erythrocytes resulted in internalization of the erythrocyte membrane and the formation of intracellular vacuoles. The thermodynamic parameters indicated that the binding process of bovine hemoglobin (BHB) and BBR was spontaneous. UV-vis absorption spectra, synchronous fluorescence, circular dichroism and Raman spectra collectively indicated that BBR showed strong binding affinity toward BHB and affected the molecular environment of residues like tryptophan and tyrosine in BHB, resulting in the conformational changes of its secondary and tertiary structure. Molecular docking indicated BBR interacted with Arg-141 residue of BHB via hydrogen bond with the bond length of 2.55 Å. The ΔG value of the BHB-BBR system was −31.79 kJ/mol. Molecular dynamics simulation indicated the root mean square derivation of BBR-BHB was <0.025 nm, suggestive of stable conformation. Cumulatively, there was an erythrocyte-Hb self-assembled drug delivery system after oral or intravenous administration of BBR, which conceivably gained novel insight into the discrepancy between the extremely low plasma concentration and relatively high tissue concentration of BBR.

A new dried blood spot LC-MS/MS method for therapeutic drug monitoring of palbociclib, ribociclib, and letrozole in patients with cancer

Therapeutic drug monitoring (TDM) is strongly suggested to define the proper drug dosage to overcome inter- and intra-patient variability in drug exposure, which is typically observed with oral anticancer agents, such as palbociclib (PALBO), ribociclib (RIBO) and letrozole (LETRO), all approved for the treatment of HR+, HER2- locally advanced or metastatic breast cancer (BC). Optimal TDM implementation requires a blood sampling organization that can be hampered by limited availability of health and laboratory personnel. Dried Blood Spot (DBS) sampling is proposed to overcome such limitations. The aim of this work was the development of a new LC-MS/MS method to analyze DBS samples containing PALBO, RIBO, and LETRO. Analytes extraction from DBS was performed by adding a methanolic solution containing the corresponding internal standards. LC-MS/MS analysis was performed using a LC Nexera (Shimadzu) system coupled with an API 4000 QTrap (SCIEX) mass spectrometer. The chromatographic separation was performed on a Luna Omega Polar C18 column (Phenomenex). The method was applied to 38 clinical samples collected by finger prick. The influence of hematocrit and spot size, sample homogeneity, stability, and correlation between finger prick and venous DBS measurement were assessed. The analytical validation was performed according to EMA and FDA guidelines. The analytical range of the method was 1 to 250 ng/mL for PALBO, 40 to 10000 ng/mL for RIBO, and 2 to 500 ng/mL for LETRO, where linearity was assessed, obtaining mean coefficients of determination (R²) of 0.9979 for PALBO, 0.9980 for RIBO, and 0.9987 for LETRO). The LC-MS/MS method runtime was 6.6 min. Incurred sample reanalysis demonstrated reproducibility, as the percentage difference between the two quantifications was lower than 20% for 100% of PALBO, 81.8% of RIBO, and 90.9% of LETRO paired samples. Intra- and inter-day precision (CV (%)) was lower than 11.4% and intra- and inter-day accuracy was between 90.0 and 106.5%. DBS sample stability at room temperature was confirmed for 2.5 months. A positive correlation was observed between DBS and plasma concentrations for the 3 drugs, Lin's concordance correlation coefficients obtained by DBS normalization applying a selected strategy were 0.958 for PALBO, 0.957 for RIBO, and 0.963 for LETRO. In conclusion, a fast, easy, and reproducible DBS LC-MS/MS method for the simultaneous quantification of palbociclib; ribociclib and letrozole was developed to be used in clinical practice.

Evaluation of the drug-drug interaction potential of treosulfan using a physiologically-based pharmacokinetic modelling approach

AIMS

The aim of this work is the development of a mechanistic physiologically-based pharmacokinetic (PBPK) model using in vitro to in vivo extrapolation to conduct a drug-drug interaction (DDI) assessment of treosulfan against two cytochrome p450 (CYP) isoenzymes and P-glycoprotein (P-gp) substrates.

METHODS

A PBPK model for treosulfan was developed de novo based on literature and unpublished clinical data. The PBPK DDI analysis was conducted using the U.S. Food and Drug Administration (FDA) DDI index drugs (probe substrates) midazolam, omeprazole and digoxin for CYP3A4, CYP2C19 and P-gp, respectively. Qualified and documented PBPK models of the probe substrates have been adopted from an open-source online model database.

RESULTS

The PBPK model for treosulfan, based on both in vitro and in vivo data, was able to predict the plasma concentration-time profiles and exposure levels of treosulfan applied for a standard conditioning treatment. Medium and low potentials for DDI on CYP3A4 (maximum area under the concentration-time curve ratio (AUCR_max  = 2.23) and CYP2C19 (AUCR_max  = 1.6) were predicted, respectively, using probe substrates midazolam and omeprazole. Treosulfan was not predicted to cause a DDI on P-gp.

CONCLUSION

Medicinal products with a narrow therapeutic index (eg, digoxin) that are substrates for CYP3A4, CYP2C19 or P-gp should not be given during treatment with treosulfan. However, considering the comprehensive treosulfan-based conditioning treatment schedule and the respective pharmacokinetic properties of the concomitantly used drugs (eg, half-life), the potential for interaction on all evaluated mechanisms would be low (AUCR < 1.25), if concomitantly administered drugs are dosed either 2 hours before or 8 hours after the 2-hour intravenous infusion of treosulfan.

Pharmacokinetics-On-a-Chip: In Vitro Microphysiological Models for Emulating of Drugs ADME

Despite many ongoing efforts across the full spectrum of pharmaceutical and biotech industries, drug development is still a costly undertaking that involves a high risk of failure during clinical trials. Animal models played vital roles in understanding the mechanism of human diseases. However, the use of these models has been a subject of heated debate, particularly due to ethical matters and the inevitable pathophysiological differences between animals and humans. Current in vitro models lack the sufficient functionality and predictivity of human pharmacokinetics and toxicity, therefore, are not capable to fully replace animal models. The recent development of micro-physiological systems has shown great potential as indispensable tools for recapitulating key physiological parameters of humans and providing in vitro methods for predicting the pharmacokinetics and pharmacodynamics in humans. Integration of Absorption, Distribution, Metabolism, and Excretion (ADME) processes within one close in vitro system is a paramount development that would meet important unmet pharmaceutical industry needs. In this review paper, synthesis of the ADME-centered organ-on-a-chip technology is systemically presented from what is achieved to what needs to be done, emphasizing the requirements of in vitro models that meet industrial needs in terms of the structure and functions.

Kinetics of in Vitro Guanine- N7-Alkylation in Calf Thymus DNA by (2 S,3 S)-1,2-Epoxybutane-3,4-diol 4-methanesulfonate and (2 S,3 S)-1,2:3,4-Diepoxybutane: Revision of the Mechanism of DNA Cross-Linking by the Prodrug Treosulfan

Prodrug treosulfan, originally registered for treatment of ovarian cancer, has gained a use in conditioning prior to hematopoietic stem cell transplantation. Treosulfan converts nonenzymatically to the monoepoxide intermediate (EBDM), and then to (2 S,3 S)-1,2:3,4-diepoxybutane (DEB). The latter alkylates DNA forming mainly (2' S,3' S)- N-7-(2',3',4'-trihydroxybut-1'-yl)guanine (THBG) and (2 S,3 S)-1,4-bis(guan-7'-yl)butane-2,3-diol cross-link (bis-N7G-BD) via the intermediate epoxide adduct (EHBG). It is believed that DNA cross-linking by DEB is a primary mechanism for the anticancer and myeloablative properties of treosulfan, but clear evidence is lacking. Recently, we have proved that EBDM alkylates DNA producing (2' S,3' S)- N-7-(2',3'-dihydroxy-4'-methylsulfonyloxybut-1'-yl)-guanine (HMSBG) and that free HMSBG converts to EHBG. In this paper, we investigated the kinetics of HMSBG, bis-N7G-BD, and THBG in DNA in vitro to elucidate the contribution of EBDM and DEB to treosulfan-dependent DNA-DNA cross-linking. Calf thymus DNA was exposed to ( A) 100 μM treosulfan, ( B) 200 μM treosulfan, and ( C) DEB at a concentration 100 μM, exceeding that produced by 200 μM treosulfan. Following mild acid thermal hydrolysis of DNA, ultrafiltration, and off-line HPLC purification, the guanine adducts were quantified by LC-MS/MS. Both bis-N7G-BD and THBG reached highest concentrations in the DNA in experiment B. Ratios of the maximal concentration of bis-N7G-BD and THBG to DEB (adduct C_max/DEB C_max) in experiments A and B were 1.7-3.0-times greater than in experiment C. EHBG converted to the bis-N7G-BD cross-link at a much higher rate constant (0.20 h^-1) than EBDM and DEB initially alkylated the DNA (1.8-3.4 × 10^-5 h^-1), giving rise to HMSBG and EHBG, respectively. HMSBG decayed unexpectedly slowly (0.022 h^-1) compared with the previously reported behavior of the free adduct (0.14 h^-1), which revealed the inhibitory effect of the DNA environment on the adduct epoxidation to EHBG. A kinetic simulation based on the obtained results and the literature pharmacokinetic parameters of treosulfan, EBDM, and DEB suggested that in patients treated with the prodrug, EBDM could produce the vast majority of EHBG and bis-N7G-BD via HMSBG. In conclusion, EBDM can produce DNA-DNA lesions independently of DEB, and likely plays a greater role in DNA cross-linking after in vivo administration of treosulfan than DEB. These findings compel revision of the previously proposed mechanism of the pharmacological action of treosulfan and contribute to better understanding of the importance of EBDM for biological effects.