Killing bacteria within biofilms by sustained release of tetracycline from triple-layered electrospun micro/nanofibre matrices of polycaprolactone and poly(ethylene-co-vinyl acetate)

Development of super nanoantimicrobials combining AgCl, tetracycline and benzalkonium chloride

In this work, we demonstrate that a simple argentometric titration is a scalable, fast, green and robust approach for producing AgCl/antibiotic hybrid antimicrobial materials. We titrated AgNO3 into tetracycline hydrochloride (TCH) aqueous solution, thus forming AgCl/TCH in a one-step procedure. Furthermore, we investigated the one-pot synthesis of triply synergistic super-nanoantimicrobials, combining an inorganic source of Ag+ ions (AgCl), a disinfecting agent (benzyl-dimethyl-hexadecyl-ammonium chloride, BAC) and a molecular antibiotic (tetracycline hydrochloride, TCH). Conventional antimicrobial tests, industrial biofilm detection protocols, and in situ IR-ATR microbial biofilm monitoring, have been adapted to understand the performance of the synthesized super-nanoantimicrobial. The resulting hybrid AgCl/BAC/TCH nanoantimicrobials are found to be synergistically active in eradicating Salmonella enterica and Lentilactobacillus parabuchneri bacteria and biofilms. This study paves the way for the development of a new class of super-efficient nanoantimicrobials that combine relatively low amounts of multiple active species into a single (nano)formulation, thus preventing the development of antimicrobial resistance towards a single active principle.

An in vitro and ex vivo wound infection model to test topical and systemic treatment with antibiotics

AIMS

This study aimed to develop a wound infection model that could be used to test antibiotic-loaded electrospun matrices for the topical treatment of infected skin and compare the effectiveness of this treatment to systemically applied antibiotics.

METHODS AND RESULTS

3D-printed flow chambers were made in which Staphylococcus aureus biofilms were grown either on a polycarbonate membrane or explanted porcine skin. The biofilms were then treated either topically, by placing antibiotic-loaded electrospun matrices on top of the biofilms, or systemically by the addition of antibiotics in the growth medium that flowed underneath the membrane or skin. The medium that was used was either a rich medium or an artificial wound fluid. The results showed that microbial viability in the biofilms was reduced to a greater extent with the topical electrospun matrices when compared to systemic treatment.

CONCLUSIONS

An ex vivo infection model was developed that is flexible and can be used to test both topical and systemic treatment of wound infections. It represents a significant improvement over previous in vitro models that we have used to test electrospun membranes.

SIGNIFICANCE AND IMPACT OF THE STUDY

The availability of a relatively simple wound infection model in which different delivery methods and dosage regimes can be tested is beneficial for the development of improved treatments for wound infections.

Investigation of Molecular Weight, Polymer Concentration and Process Parameters Factors on the Sustained Release of the Anti-Multiple-Sclerosis Agent Teriflunomide from Poly(ε-caprolactone) Electrospun Nanofibrous Matrices

In the current work, a series of PCL polyesters with different molecular weights was synthesized and used for the fabrication of nanofibrous patches via electrospinning, as sustained release matrices for leflunomide’s active metabolite, teriflunomide (TFL). The electrospinning conditions for each sample were optimized and it was found that only one material with high Mn (71,000) was able to produce structures with distinct fibers devoid of the presence of beads. The successful preparation of the fibers was determined by scanning electron microscopy (SEM).TFL (10, 20 and 30 wt%) in three different concentrations was incorporated into the prepared nanofibers, which were used in in vitro drug release experiments. The drug-loaded nanofibrous formulations were further characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and powder X-ray diffractometry (XRD).It was found that TFL was incorporated in an amorphous form inside the polymeric nanofibers and that significant molecular interactions were formed between the drug and the polyester. Additionally, in vitro dissolution studies showed that the PCL/TFL-loaded nanofibers exhibit a biphasic release profile, having an initial burst release phase, followed by a sustained release until 250 h. Finally, a kinetic analysis of the obtained profiles revealed that the drug release was directly dependent on the amount TFL incorporated into the nanofibers.

Application of Electrospun Nanofiber Membrane in the Treatment of Diabetic Wounds

Diabetic wounds are complications of diabetes which are caused by skin dystrophy because of local ischemia and hypoxia. Diabetes causes wounds in a pathological state of inflammation, resulting in delayed wound healing. The structure of electrospun nanofibers is similar to that of the extracellular matrix (ECM), which is conducive to the attachment, growth, and migration of fibroblasts, thus favoring the formation of new skin tissue at the wound. The composition and size of electrospun nanofiber membranes can be easily adjusted, and the controlled release of loaded drugs can be realized by regulating the fiber structure. The porous structure of the fiber membrane is beneficial to gas exchange and exudate absorption at the wound, and the fiber surface can be easily modified to give it function. Electrospun fibers can be used as wound dressing and have great application potential in the treatment of diabetic wounds. In this study, the applications of polymer electrospun fibers, nanoparticle-loaded electrospun fibers, drug-loaded electrospun fibers, and cell-loaded electrospun fibers, in the treatment of diabetic wounds were reviewed, and provide new ideas for the effective treatment of diabetic wounds.

Polymer-Based Carriers in Dental Local Healing-Review and Future Challenges

Polymers in drug formulation technology and the engineering of biomaterials for the treatment of oral diseases constitute a group of excipients that often possess additional properties in addition to their primary function, i.e., biological activity, sensitivity to stimuli, mucoadhesive properties, improved penetration of the active pharmaceutical ingredient (API) across biological barriers, and effects on wound healing or gingival and bone tissue regeneration. Through the use of multifunctional polymers, it has become possible to design carriers and materials tailored to the specific conditions and site of application, to deliver the active substance directly to the affected tissue, including intra-periodontal pocket delivery, and to release the active substance in a timed manner, allowing for the improvement of the form of application and further development of therapeutic strategies. The scope of this review is polymeric drug carriers and materials developed from selected multifunctional groups of natural, semi-synthetic, and synthetic polymers for topical therapeutic applications. Moreover, the characteristics of the topical application and the needs for the properties of carriers for topical administration of an active substance in the treatment of oral diseases are presented to more understand the difficulties associated with the design of optimal active substance carriers and materials for the treatment of lesions located in the oral cavity.

Inhibition of biofilm formation by alpha-mangostin loaded nanoparticles against Staphylococcus aureus

This study aimed to investigate the antibiofilm activity of alpha-mangostin (AMG) loaded nanoparticles (nanoAMG) against Staphylococcus aureus, including the methicillin-resistant strain MRSA252. The results indicated that treatment with 24 μmol/L nanoAMG inhibited the formation of biofilm biomass by 53-62%, compared to 40-44% for free AMG (p < 0.05). At 48 μmol/L, biofilms in all nanoAMG treated samples were nearly fully disrupted for the two tested strains, MRSA252 and the methicillin-sensitive strain NCTC6571. That concentration resulted in killing of biofilm cells. A lower concentration of 12 µmol/L nanoAMG inhibited initial adherence of the two bacterial strains by > 50%. In contrast, activity of nanoAMG was limited on preformed mature biofilms, which at a concentration of 48 µmol/L were reduced only by 27% and 22% for NCTC6571 and MRSA252, respectively. The effects of AMG or nanoAMG on the expression of biofilm-related genes showed some noticeable differences between the two strains. For instance, the expression level of ebpS was downregulated in MRSA252 and upregulated in NCTC6571 when those strains were treated with either AMG or nanoAMG. In contrast, the expression of fnbB was down regulated in NCTC6571, while it was up-regulated in the MRSA252. The expression of other biofilm-related genes (icaC, clfB and fnbA) was down regulated in both strains. In conclusion, our results suggest that AMG coated nanoparticles had enhanced biological activity as compared to free AMG, indicating that nanoAMG could be a new and promising inhibitor of biofilm formation to tackle S. aureus, including strains that are resistant to multiple antibiotics.

Nanotheranostics: A Possible Solution for Drug-Resistant Staphylococcus aureus and their Biofilms?

Staphylococcus aureus is a notorious pathogen that colonizes implants (orthopedic and breast implants) and wounds with a vicious resistance to antibiotic therapy. Methicillin-resistant S. aureus (MRSA) is a catastrophe mainly restricted to hospitals and emerged to community reservoirs, acquiring resistance and forming biofilms. Treating biofilms is problematic except via implant removal or wound debridement. Nanoparticles (NPs) and nanofibers could combat superbugs and biofilms and rapidly diagnose MRSA. Nanotheranostics combine diagnostics and therapeutics into a single agent. This comprehensive review is interpretative, utilizing mainly recent literature (since 2016) besides the older remarkable studies sourced via Google Scholar and PubMed. We unravel the molecular S. aureus resistance and complex biofilm. The diagnostic properties and detailed antibacterial and antibiofilm NP mechanisms are elucidated in exciting stories. We highlight the challenges of bacterial infections nanotheranostics. Finally, we discuss the literature and provide "three action appraisals". (i) The first appraisal consists of preventive actions (two wings), avoiding unnecessary hospital visits, hand hygiene, and legislations against over-the-counter antibiotics as the general preventive wing. Our second recommended preventive wing includes preventing the adverse side effects of the NPs from resistance and toxicity by establishing standard testing procedures. These standard procedures should provide breakpoints of bacteria's susceptibility to NPs and a thorough toxicological examination of every single batch of synthesized NPs. (ii) The second appraisal includes theranostic actions, using nanotheranostics to diagnose and treat MRSA, such as what we call "multifunctional theranostic nanofibers. (iii) The third action appraisal consists of collaborative actions.

Spun Biotextiles in Tissue Engineering and Biomolecules Delivery Systems

Nowadays, tissue engineering is described as an interdisciplinary field that combines engineering principles and life sciences to generate implantable devices to repair, restore and/or improve functions of injured tissues. Such devices are designed to induce the interaction and integration of tissue and cells within the implantable matrices and are manufactured to meet the appropriate physical, mechanical and physiological local demands. Biodegradable constructs based on polymeric fibers are desirable for tissue engineering due to their large surface area, interconnectivity, open pore structure, and controlled mechanical strength. Additionally, biodegradable constructs are also very sought-out for biomolecule delivery systems with a target-directed action. In the present review, we explore the properties of some of the most common biodegradable polymers used in tissue engineering applications and biomolecule delivery systems and highlight their most important uses.

Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications

Polymeric wound dressings with advanced properties are highly preferred formulations to promote the tissue healing process in wound care. In this study, a combinational technique was investigated for the fabrication of bi-layered carriers from a blend of polyvinyl alcohol (PVA) and sodium alginate (SA). The bi-layered carriers were prepared by solvent casting in combination with two surface modification approaches: electrospinning or three-dimensional (3D) printing. The bi-layered carriers were characterized and evaluated in terms of physical, physicochemical, adhesive properties and for the safety and biological cell behavior. In addition, an initial inkjet printing trial for the incorporation of bioactive substances for drug delivery purposes was performed. The solvent cast (SC) film served as a robust base layer. The bi-layered carriers with electrospun nanofibers (NFs) as the surface layer showed improved physical durability and decreased adhesiveness compared to the SC film and bi-layered carriers with patterned 3D printed layer. Thus, these bi-layered carriers presented favorable properties for dermal use with minimal tissue damage. In addition, electrospun NFs on SC films (bi-layered SC/NF carrier) provided the best physical structure for the cell adhesion and proliferation as the highest cell viability was measured compared to the SC film and the carrier with patterned 3D printed layer (bi-layered SC/3D carrier). The surface properties of the bi-layered carriers with electrospun NFs showed great potential to be utilized in advanced technical approach with inkjet printing for the fabrication of bioactive wound dressings.

Antimicrobial Electrospun Polycaprolactone-Based Wound Dressings: An In Vitro Study About the Importance of the Direct Contact to Elicit Bactericidal Activity

Objective: To prepare efficient antibacterial carvacrol (CAR) and thymol (THY)-loaded electrospun polycaprolactone (PCL)-based wound dressings. Approach: Using electrospinning we were able to prepare wound dressings with antimicrobial action thanks to their large surface per volume ratio, which allows their loading with therapeutic amounts of active principles. By nuclear magnetic resonance we demonstrated that the antimicrobial compounds are donors of hydrogen bonds to the ester functional group in PCL, which acts as acceptor and that intermolecular interaction is responsible for the high drug loading achieved. Results: Those mats loaded with CAR and THY without the use of solubilizing agents were able to completely eradicate both Gram-positive (Staphylococcus aureus ATCC 25923) and Gram-negative (Escherichia coli S17 strain) bacteria at doses inferior to the ones needed when using the free nonsupported compounds. A superior antimicrobial action was observed for THY and CAR against Gram-negative bacteria than against Gram-positive bacteria, despite the higher hydrophilicity of the outer layer of Gram-negative bacteria. Innovation: We demonstrate that a direct contact between the bacteria and the dressing is required to elicit antimicrobial action. We also evaluated drug loadings by gas chromatography coupled with mass spectrometry and nuclear magnetic resonance validating a new analytical approach. Finally we were able to visualize the pathogenic bacteria on the dressings by confocal microscopy. Conclusion: The interaction between the PCL-based mat and the pathogenic bacteria is a key issue to achieve complete pathogen eradication. Under no-contact conditions, released CAR or THY from the electrospun mats did not exert any antimicrobial action at the doses tested.

Electrospun Nanofibers for Tissue Engineering with Drug Loading and Release

Electrospinning technologies have been applied in the field of tissue engineering as materials, with nanoscale-structures and high porosity, can be easily prepared via this method to bio-mimic the natural extracellular matrix (ECM). Tissue engineering aims to fabricate functional biomaterials for the repairment and regeneration of defective tissue. In addition to the structural simulation for accelerating the repair process and achieving a high-quality regeneration, the combination of biomaterials and bioactive molecules is required for an ideal tissue-engineering scaffold. Due to the diversity in materials and method selection for electrospinning, a great flexibility in drug delivery systems can be achieved. Various drugs including antibiotic agents, vitamins, peptides, and proteins can be incorporated into electrospun scaffolds using different electrospinning techniques and drug-loading methods. This is a review of recent research on electrospun nanofibrous scaffolds for tissue-engineering applications, the development of preparation methods, and the delivery of various bioactive molecules. These studies are based on the fabrication of electrospun biomaterials for the repair of blood vessels, nerve tissues, cartilage, bone defects, and the treatment of aneurysms and skin wounds, as well as their applications related to oral mucosa and dental fields. In these studies, due to the optimal selection of drugs and loading methods based on electrospinning, in vitro and in vivo experiments demonstrated that these scaffolds exhibited desirable effects for the repair and treatment of damaged tissue and, thus, have excellent potential for clinical application.

Biomedical Applications of Electrospun Nanofibers: Drug and Nanoparticle Delivery

The electrospinning process has gained popularity due to its ease of use, simplicity and diverse applications. The properties of electrospun fibers can be controlled by modifying either process variables (e.g., applied voltage, solution flow rate, and distance between charged capillary and collector) or polymeric solution properties (e.g., concentration, molecular weight, viscosity, surface tension, solvent volatility, conductivity, and surface charge density). However, many variables affecting electrospinning are interdependent. An optimized electrospinning process is one in which these parameters remain constant and continuously produce nanofibers consistent in physicochemical properties. In addition, nozzle configurations, such as single nozzle, coaxial, multi-jet electrospinning, have an impact on the fiber characteristics. The polymeric solution could be aqueous, a polymeric melt or an emulsion, which in turn leads to different types of nanofiber formation. Nanofiber properties can also be modified by polarity inversion and by varying the collector design. The active moiety is incorporated into polymeric fibers by blending, surface modification or emulsion formation. The nanofibers can be further modified to deliver multiple drugs, and multilayer polymer coating allows sustained release of the incorporated active moiety. Electrospun nanofibers prepared from polymers are used to deliver antibiotic and anticancer agents, DNA, RNA, proteins and growth factors. This review provides a compilation of studies involving the use of electrospun fibers in biomedical applications with emphasis on nanoparticle-impregnated nanofibers.

Engineering of Nanofibrous Amorphous and Crystalline Solid Dispersions for Oral Drug Delivery

Poor aqueous solubility (<0.1 mg/mL) affects a significant number of drugs currently on the market or under development. Several formulation strategies including salt formation, particle size reduction, and solid dispersion approaches have been employed with varied success. In this review, we focus primarily on the emerging trends in the generation of amorphous and micro/nano-crystalline solid dispersions using electrospinning to improve the dissolution rate and in turn the bioavailability of poorly water-soluble drugs. Electrospinning is a simple but versatile process that utilizes electrostatic forces to generate polymeric fibers and has been used for over 100 years to generate synthetic fibers. We discuss the various electrospinning studies and spinneret types that have been used to generate amorphous and crystalline solid dispersions.

Electrospinning of Cyclodextrin Functional Nanofibers for Drug Delivery Applications

Electrospun nanofibers have sparked tremendous attention in drug delivery since they can offer high specific surface area, tailored release of drugs, controlled surface chemistry for preferred protein adsorption, and tunable porosity. Several functional motifs were incorporated into electrospun nanofibers to greatly expand their drug loading capacity or to provide the sustained release of the embedded drug molecules. In this regard, cyclodextrins (CyD) are considered as ideal drug carrier molecules as they are natural, edible, and biocompatible compounds with a truncated cone-shape with a relatively hydrophobic cavity interior for complexation with hydrophobic drugs and a hydrophilic exterior to increase the water-solubility of drugs. Further, the formation of CyD-drug inclusion complexes can protect drug molecules from physiological degradation, or elimination and thus increases the stability and bioavailability of drugs, of which the release takes place with time, accompanied by fiber degradation. In this review, we summarize studies related to CyD-functional electrospun nanofibers for drug delivery applications. The review begins with an introductory description of electrospinning; the structure, properties, and toxicology of CyD; and CyD-drug complexation. Thereafter, the release of various drug molecules from CyD-functional electrospun nanofibers is provided in subsequent sections. The review concludes with a summary and outlook on material strategies.

Electrospinning of Ethylene Vinyl Acetate/Poly(Lactic Acid) Blends on a Water Surface

The electrospinning of an ethylene vinyl acetate (EVA) copolymer with a vinyl acetate content of 28 wt.% is limited due to the solubility of the copolymer in standard laboratory conditions. Poly(lactic acid) (PLA) is a biodegradable polymer that can be electrospun easily. However, PLA has limited applicability because it is brittle. Blends of these polymers are of interest in order to obtain new types of materials with counterbalanced properties originating from both polymeric compounds. The fibers were electrospun on a water surface from a solution mixture containing various weight ratios of both polymers using a dichloromethane and acetone (70:30 v/v) mixture as solvent. The morphologies of the prepared non-woven mats were examined by scanning electron microscopy (SEM), and the chemical composition was investigated by X-ray photoelectron spectroscopy (XPS) and by Fourier Transform Infrared Spectroscopy (FTIR). The fibers' thermal properties and stability were examined, and the mechanical properties were tested. The results showed that the strength and flexibility of the blend samples were enhanced by the presence of PLA.

Antibiofilm activity of α-mangostin extracted from Garcinia mangostana L. against Staphylococcus aureus

OBJECTIVE

To isolate α-mangostin (AMG) from the peels of mangosteen (Garcinia mangostana L.), grown in Vietnam, and to investigate antibiofilm activity of this compound against three Staphylococcus aureus (S. aureus) strains, one of which was methicillin-resistant S. aureus (MRSA) and the other two strains were methicillin-sensitive S. aureus (MSSA).

METHODS

AMG in n-hexane fraction was isolated on a silica gel column and chemically analyzed by HPLC and NMR. The antibiofilm activity of this compound was investigated by using a 96-well plate model for the formation of biofilms. Biofilm biomass was quantified using crystal violet. The viability of cells was observed under confocal microscopy using LIVE/DEAD BacLight stains. Biofilm composition was determined using specific chemical and enzyme tests for polysaccharide, protein and DNA. Membrane-damaging activity was assayed by measuring the hemolysis of human red blood cells in presence of AMG.

RESULTS

The results indicated that the isolated AMG, with a purity that exceeded 98%, had minimal inhibitory concentrations in the range of 4.6-9.2 μmol/L for the three strains tested. Interestingly, the MSSA strains were more sensitive to AMG than the MRSA strain. Minimal bactericidal concentrations were 2-fold higher than the minimal inhibitory concentration values for the three strains, indicating that AMG was a bactericidal compound. AMG also prevented biofilm formation effectively, albeit that again the MRSA strain was the most resistant. Interestingly, biofilms of the MRSA strain contained protein as a main component of the extracellular matrix, whereas this was polysaccharide in the MSSA strains. This might relate to the resistance of the MRSA 252 strain to AMG. Assays using human red blood cells indicated that AMG caused significant membrane damage with 50% of cell lysis occurred at concentration of about 36 μmol/L.

CONCLUSIONS

Our results provide evidence that the isolated AMG has inhibitory activity against biofilm formation by S. aureus, including MRSA. Thus, isolated AMG proposes a high potential to develop a novel phytopharmaceutical for the treatment of MRSA.

Functional electrospun fibers for the treatment of human skin wounds

Wounds are trauma induced defects of the human skin involving a multitude of endogenous biochemical events and cellular reactions of the immune system. The healing process is extremely complex and affected by the patient's physiological conditions, potential implications like infectious pathogens and inflammation as well as external factors. Due to increasing incidence of chronic wounds and proceeding resistance of infection pathogens, there is a strong need for effective therapeutic wound care. In this context, electrospun fibers with diameters in the nano- to micrometer range gain increasing interest. While resembling the structure of the native human extracellular matrix, such fiber mats provide physical and mechanical protection (including protection against bacterial invasion). At the same time, the fibers allow for gas exchange and prevent occlusion of the wound bed, thus facilitating wound healing. In addition, drugs can be incorporated within such fiber mats and their release can be adjusted by the material and dimensions of the individual fibers. The review gives a comprehensive overview about the current state of electrospun fibers for therapeutic application on skin wounds. Different materials as well as fabrication techniques are introduced including approaches for incorporation of drugs into or drug attachment onto the fiber surface. Against the background of wound pathophysiology and established therapy approaches, the therapeutic potential of electrospun fiber systems is discussed. A specific focus is set on interactions of fibers with skin cells/tissues as well as wound pathogens and strategies to modify and control them as key aspects for developing effective wound therapeutics. Further, advantages and limitations of controlled drug delivery from fiber mats to skin wounds are discussed and a future perspective is provided.

Nanoparticles and nanofibers for topical drug delivery

This review provides the first comprehensive overview of the use of both nanoparticles and nanofibers for topical drug delivery. Researchers have explored the use of nanotechnology, specifically nanoparticles and nanofibers, as drug delivery systems for topical and transdermal applications. This approach employs increased drug concentration in the carrier, in order to increase drug flux into and through the skin. Both nanoparticles and nanofibers can be used to deliver hydrophobic and hydrophilic drugs and are capable of controlled release for a prolonged period of time. The examples presented provide significant evidence that this area of research has - and will continue to have - a profound impact on both clinical outcomes and the development of new products.

Electrospun Zein/PCL Fibrous Matrices Release Tetracycline in a Controlled Manner, Killing Staphylococcus aureus Both in Biofilms and Ex Vivo on Pig Skin, and are Compatible with Human Skin Cells

Purpose

To investigate the destruction of clinically-relevant bacteria within biofilms via the sustained release of the antibiotic tetracycline from zein-based electrospun polymeric fibrous matrices and to demonstrate the compatibility of such wound dressing matrices with human skin cells.

Methods

Zein/PCL triple layered fibrous dressings with entrapped tetracycline were electrospun. The successful entrapment of tetracycline in these dressings was validated. The successful release of bioactive tetracycline, the destruction of preformed biofilms, and the viability of fibroblast (FEK4) cells were investigated.

Results

The sustained release of tetracycline from these matrices led to the efficient destruction of preformed biofilms from Staphylococcus aureus MRSA252 in vitro, and of MRSA252 and ATCC 25923 bacteria in an ex vivo pig skin model using 1 × 1 cm square matrices containing tetracycline (30 μg). Human FEK4 cells grew normally in the presence of these matrices.

Conclusions

The ability of the zein-based matrices to destroy bacteria within increasingly complex in vitro biofilm models was clearly established. An ex vivo pig skin assay showed that these matrices, with entrapped tetracycline, efficiently kill bacteria and this, combined with their compatibility with a human skin cell line suggest these matrices are well suited for applications in wound healing and infection control.

Advances in skin regeneration: application of electrospun scaffolds

The paucity of cellular and molecular signals essential for normal wound healing makes severe dermatological ulcers stubborn to heal. The novel strategies of skin regenerative treatments are focused on the development of biologically responsive scaffolds accompanied by cells and multiple biomolecules resembling structural and biochemical cues of the natural extracellular matrix (ECM). Electrospun nanofibrous scaffolds provide similar architecture to the ECM leading to enhancement of cell adhesion, proliferation, migration and neo tissue formation. This Review surveys the application of biocompatible natural, synthetic and composite polymers to fabricate electrospun scaffolds as skin substitutes and wound dressings. Furthermore, the application of biomolecules and therapeutic agents in the nanofibrous scaffolds viz growth factors, genes, antibiotics, silver nanoparticles, and natural medicines with the aim of ameliorating cellular behavior, wound healing, and skin regeneration are discussed.

Zein/polycaprolactone electrospun matrices for localised controlled delivery of tetracycline

We report the controlled release of the antibiotic tetracycline (Tet) from triple-layered (3L) electrospun matrices consisting of zein or a zein/PCL blend, where the drug was loaded into the central layer with the two outer layers acting as diffusion barriers. These fibrous matrices successfully encapsulated Tet and efficiently inhibited the growth of a clinical isolate, the methicillin-resistant Staphylococcus aureus strain MRSA252, as demonstrated in a modified Kirby-Bauer disc assay over 5 days. Whilst untreated zein fibres are unstable in an aqueous environment, rapidly shrinking due to plasticisation and film formation, blending zein with PCL stabilised the electrospun matrices and prevented them from shrinking. These 3L formulations display sustained antibiotic release and provide a proof of concept for zein-based polymeric matrices as wound dressings to treat or prevent bacterial infection. This is the first demonstration of the controlled release of a clinically used antibiotic from electrospun zein-based matrices.

Delivery of antibiotics with polymeric particles

Despite the wide use of antibiotics, bacterial infection is still one of the leading causes of hospitalization and mortality. The clinical failure of antibiotic therapy is linked with low bioavailability, poor penetration to bacterial infection sites, and the side effects of antibiotics, as well as the antibiotic resistance properties of bacteria. Antibiotics encapsulated in nanoparticles or microparticles made up of a biodegradable polymer have shown great potential in replacing the administration of antibiotics in their "free" form. Polymeric particles provide protection to antibiotics against environmental deactivation and alter antibiotic pharmacokinetics and biodistribution. Polymeric particles can overcome tissue and cellular barriers and deliver antibiotics into very dense tissues and inaccessible target cells. Polymeric particles can be modified to target or respond to particular tissues, cells, and even bacteria, and thereby facilitate the selective concentration or release of the antibiotic at infection sites, respectively. Thus, the delivery of antibiotics with polymeric particles augments the level of the bioactive drug at the site of infection while reducing the dosage and the dosing frequency. The end results are improved therapeutic effects as well as decreased "pill burden" and drug side effects in patients. The main objective of this review is to analyze recent advances and current perspectives in the use of polymeric antibiotic delivery systems in the treatment of bacterial infection.

Amorphous formulations of indomethacin and griseofulvin prepared by electrospinning

Following an array of optimization experiments, two series of electrospun polyvinylpyrrolidone (PVP) fibers were prepared. One set of fibers contained various loadings of indomethacin, known to form stable glasses, and the other griseofulvin (a poor glass former). Drug loadings of up to 33% w/w were achieved. Electron microscopy data showed the fibers largely to comprise smooth and uniform cylinders, with evidence for solvent droplets in some samples. In all cases, the drug was found to exist in the amorphous physical state in the fibers on the basis of X-ray diffraction and differential scanning calorimetry (DSC) measurements. Modulated temperature DSC showed that the relationship between a formulation's glass transition temperature (Tg) and the drug loading follows the Gordon-Taylor equation, but not the Fox equation. The results of Gordon-Taylor analysis indicated that the drug/polymer interactions were stronger with indomethacin. The interactions between drug and polymer were explored in more detail using molecular modeling simulations and again found to be stronger with indomethacin; the presence of significant intermolecular forces was further confirmed using IR spectroscopy. The amorphous form of both drugs was found to be stable after storage of the fibers for 8 months in a desiccator (relative humidity <25%). Finally, the functional performance of the fibers was studied; in all cases, the drug-loaded fibers released their drug cargo very rapidly, offering accelerated dissolution over the pure drug.

The antimicrobial and antibiofilm activities of copper(II) complexes

Biofilm-related bacterial infections pose a significant problem, as they are generally more tolerant to antibiotics and the immune system. Development of novel compounds with antibiofilm activity is therefore paramount. In this study we have analysed metal complexes of the general structure [M(IL)(AL)](2+) (where IL represents functionalised 1,10-phenanthrolines and AL represents 1S,2S- or 1R,2R-diaminocyclohexane) and [Cu(IL)3](2+). Antimicrobial activity was tested on a number of bacterial strains, showing that copper(II) compounds were active against both Gram-positive and Gram-negative bacteria, albeit that activity was generally higher for the former. The antibiofilm activity was then determined against a clinical isolate of meticillin-resistant Staphylococcus aureus (MRSA). Strikingly, the copper complexes tested showed significant activity against biofilms, and were better in the removal of biofilms than vancomycin, an antibiotic that is currently used in the treatment of MRSA infections.