Supercritical Carbon Dioxide Extraction of Sinensetin, Isosinensetin, and Rosmarinic Acid from Orthosiphon stamineus Leaves: Optimization and Modeling

Influence of particle size in supercritical carbon dioxide extraction of roselle (Hibiscus sabdariffa) on bioactive compound recovery, extraction rate, diffusivity, and solubility

The purpose of this work was to establish the best particle size for recovering high yields of total phenolic compounds (TPC), total anthocyanin compounds(TAC) and total flavonoid compounds (TFC) from roselle (Hibiscus sabdariffa) by applying supercritical carbon dioxide (ScCO₂). The extraction rate, diffusivity and solubility of yield in ScCO₂ were also studied and calculated utilizing models. Pressure (10 and 30 MPa), temperature (40 and 60 °C), and particle size (250 µm < dp < 355 µm, 355 µm < dp < 425 µm and 425 µm < dp < 500 µm) were employed as variables in this experiment. The greatest recovery was 11.96% yield, 7.16 mg/100 g TAC, 42.93 mg/100 g TPC and 239.36 mg/100 g TFC under the conditions of 30 MPA, 40 °C and 250 µm < dp < 355 µm, respectively. The extraction rate of supercritical carbon dioxide in roselle extraction ranged from 5.19 E-03 to 1.35 E-03 mg/s fitted using the Esquivel model. The diffusivity coefficient of ScCO₂ ranged from 2.17E-12 to 3.72E-11 mg/s², as fitted by a single sphere model. The greatest solubility of global yield, TAC, TPC and TFC in ScCO₂ was 1.50 g/L, 0.3 mg/L, 1.69 mg/L and 9.97 mg/L, respectively, with a particle size of 250 µm < dp < 355 µm. The smaller particle size of roselle provides the maximum bioactive compound recovery and solubility. Furthermore, the diffusivity and extraction of ScCO₂ are increased by decreasing the particle size. Therefore, a smaller particle size is appropriate for roselle extraction by ScCO₂ based on the experimental and modelling data.

Valorization of Peanut Skin as Agricultural Waste Using Various Extraction Methods: A Review

Peanuts (Arachis hypogea) can be made into various products, from oil to butter to roasted snack peanuts and candies, all from the kernels. However, the skin is usually thrown away, used as cheap animal feed, or as one of the ingredients in plant fertilizer due to its little value on the market. For the past ten years, studies have been conducted to determine the full extent of the skin's bioactive substance repertoire and its powerful antioxidant potential. Alternatively, researchers reported that peanut skin could be used and be profitable in a less-intensive extraction technique. Therefore, this review explores the conventional and green extraction of peanut oil, peanut production, peanut physicochemical characteristics, antioxidant activity, and the prospects of valorization of peanut skin. The significance of the valorization of peanut skin is that it contains high antioxidant capacity, catechin, epicatechin resveratrol, and procyanidins, which are also advantageous. It could be exploited in sustainable extraction, notably in the pharmaceutical industries.

Recovery of Anthocyanins from Hibiscus sabdariffa L. Using a Combination of Supercritical Carbon Dioxide Extraction and Subcritical Water Extraction

Anthocyanins are one of the bioactive compounds in roselle that has many medicinal proposes. Anthocyanins are placed in the inner part of the roselle; therefore, combinations of two methods were applied to extract the anthocyanins. The first stage is employing supercritical carbon dioxide (ScCO2) to break the particle surface or outer layer of the roselle based on the total phenolic compounds (TPC) recovery, and the second step was to apply subcritical water extraction (SWE) for the extraction of anthocyanins. The objective is to determine the best conditions to obtain high yields of total anthocyanins compounds (TAC) from the roselle (Hibiscus sabdariffa) by employing a combination of ScCO2 and SWE. The optimal conditions of ScCO2 (first stage) were 19.13 MPa, 60 °C, and 4.31 mL/min, yielding 18.20%, and 80.34 mg/100 g TPC, respectively. The optimum conditions of SWE (second stage) were 9.48 MPa, 137 °C, and 6.14 mL/min, yielding 86.11% and 1224.61 mg/100 g TAC, respectively. The application of integrated ScCO2 and SWE proved successful in achieving high anthocyanins production and yield as compared to previous extraction methods. This approach may be used to extract the roselle with a greater anthocyanin’s concentration than the prior method.

Optimization of Red Pigment Anthocyanin Recovery from Hibiscus sabdariffa by Subcritical Water Extraction

The optimization of red pigment anthocyanin from roselle (Hibiscus sabdariffa) by subcritical water extraction (SWE) has not been the topic of a scientific investigation. Therefore, the objective of this paper was to establish the optimal parameters for obtaining the maximum yield, total anthocyanin compounds (TAC), total phenolic compounds (TPC), and total flavonoid compounds (TFC) by SWE utilizing a response surface methodology. The optimal conditions were 8.75 MPa, 393.54 K, and 4.89 mL/min, with a yield of 0.69 g/g, TAC of 927.74 mg/100 g, TPC of 39.54 mg/100 g, and TFC of 614.57 mg/100 g. High temperatures and flow rates are favorable for achieving a maximum yield. In contrast, a high temperature is suitable for obtaining high concentrations of anthocyanin, flavonoid, and phenolic compounds. This technique (SWE) recovers anthocyanin at a greater extraction rate than traditional methods; hence, SWE may be substituted for conventional methods for extracting anthocyanin.

Comparison of Alliin Recovery from Allium sativum L. Using Soxhlet Extraction and Subcritical Water Extraction

Garlic (Allium sativum L.) is an herbaceous plant and is recognised for its numerous medicinal and culinary properties, and it is used in diverse food preparations for its characteristic flavour and aroma. High alliin content increases the formation of allicin, a bioactive compound of garlic. Therefore, this research aimed to compare different extraction methods for garlic (Allium sativum L.) between subcritical water extraction (SWE) and Soxhlet extraction to obtain a high extraction yield and alliin content. The SWE conditions were 120 °C and 180 °C temperatures and 2 mL/min and 6 mL/min flow rates at a constant pressure of 15 MPa for a 10 min extraction time, respectively. In the meanwhile, the extraction time for Soxhlet extraction with various solvents, namely, distilled water, ethanol–water (1:1), and 100% ethanol, was two hours. High-performance liquid chromatography (HPLC) was used to analyse alliin. Soxhlet extraction had the best yield (1.96 g) using ethanol–water (1:1) as the solvent in comparison to SWE extraction (1.28 g) at 180 °C and 6 mL/min. In contrast, SWE yielded a greater concentration of alliin (136.82 mg/g) at 120 °C and 2 mL/min than the Soxhlet method when using distilled water as the solvent (65.18 mg/g). Therefore, SWE may replace Soxhlet extraction as the conventional method for extracting alliin from garlic at a high concentration, and SWE has advantages that favour garlic extracts.

Solubility of Rosmarinic Acid in Supercritical Carbon Dioxide Extraction from Orthosiphon stamineus Leaves

Rosmarinic acid (RA) is present in a broad variety of plants, including those in the Lamiaceae family, and has a wide range of pharmacological effects, particularly antioxidant activity. To extract RA from Orthosiphon stamineus (OS) leaves, a Lamiaceae plant, a suitable extraction process is necessary. The present study used a green extraction method of supercritical carbon dioxide (SCCO2) extraction with the addition of ethanol as a modifier to objectively measure and correlate the solubility of RA from OS leaves. The solubility of RA in SCCO2 was determined using a dynamic extraction approach, and the solubility data were correlated using three density-based semi-empirical models developed by Chrastil, del Valle-Aguilera, and Gonzalez. Temperatures of 40, 60, and 80 °C and pressures of 10, 20, and 30 MPa were used in the experiments. The maximum RA solubility was found at 80 °C and 10 MPa with 2.004 mg of rosmarinic acid/L solvent. The RA solubility data correlated strongly with the three semi-empirical models with less than 10% AARD. Furthermore, the fastest RA extraction rate of 0.0061 mg/g min−1 was recorded at 80 °C and 10 MPa, and the correlation using the Patricelli model was in strong agreement with experimental results with less than 15% AARD.

Penicillins' Solubility in Supercritical Carbon Dioxide: Modeling by Cubic Equations of States Revisited

Development of processes using green solvents as supercritical fluids (SCFs) depends on the accuracy of modeling and predicting phase equilibrium which is of considerable importance to exploit the use of SCF process at the level of pharmaceutical industries. Solid-Fluid equilibrium modeling is associated to many drawbacks when compressed gas-based models as cubic equations of states (cEoSs) are used. The unavailability of experimental values of solute's sublimation pressure presents one of the major obstacles to the solubility modeling with this type of models, and thus, its estimation is essential and inevitable. This work is an attempt to address a question regarding "accurate estimated value" of sublimation pressure of two antibiotics Penicillin G (benzyl penicillin) and Penicillin V (phenoxymethyl penicillin). Toward that, first, cEoSs are provided as the thermodynamics modeling framework and fundamental approach. Second, a discussion and a review of some literature results are given. Third, results are invoked to present a criticism analysis that comes from the use of modified form of Peng-Robinson (PR) equation of states. Finally, considerable improvement of modeling results by using a new sublimation pressure is shown.