Modeling of Congo Red Adsorption onto Multi-walled Carbon Nanotubes Using Response Surface Methodology: Kinetic, Isotherm and Thermodynamic Studies

Separation of dye from aqueous solution by a new gravity compression and aeration system

Filtration is one of the important technologies for separating suspended particles. Under the condition of gravity compression, the filtration density can be increased and the separation effect of suspended particles can be improved. Considering the complex composition and the difficulty in degrading dye in industrial wastewater, a gravity compression aeration system with a modified polyester fibre ball (denoted as MPFB) was evaluated for the separation of dye from water. Congo red azo dye solution (0-40 mg/L) was selected as the model treatment compound. The MPFB was prepared by adjusting the concentrations of alkali (Quality score 0-25%), β-cyclodextrin (0∼80 g/L), reaction temperature (40-90°C), and silane coupler concentration (Concentration fractions 0-0.8%). We used Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) to characterise the MPFB. The separation was affected significantly by adsorption conditions such as MPFB dose and pH. The lower the MPFB dose, the higher the expected adsorption capacity. For the treatment of a dye solution at 500 mg/L, 100% removal was achieved with 48 g/L MPFB, at pH 8 during adsorption under non-circulation aeration. For 24 h of reaction, the system could reach the maximum adsorption capacity of 11.2 mg/g, which followed the pseudo-first order kinetics model and the intraparticle diffusion model. We discovered that circulation aeration provided the best adsorption and electrostatic and hydrogen bonding were the dominant components of adsorption. Overall, the system is a promising technology and has the potential to treat large volumes of dye wastewater.

In-Situ SERS Detection of Hg2+/Cd2+ and Congo Red Adsorption Using Spiral CNTs/Brass Nails

Brass spiral nails were functionalized with CoFe2O4 nanoparticles and utilized as a substrate for the growth of extremely long CNTs with helical structures and diameters smaller than 20 nm. Different methods were used to characterize the grown CNTs' structures and morphologies. The characteristic Raman peaks of CNTs were amplified four times after being uploaded on the spiral nail, making the substrates for surface-enhanced Raman spectroscopy (SERS) more sensitive. To detect Hg2+ and Cd2+ at concentrations ranging from 1 to 1000 ppb, a CNT/spiral brass nail was used as a SERS substrate. The proposed sensor demonstrated high sensitivity and selectivity between these heavy metal ions. As a result, the proposed CNTs/spiral brass sensor can be an effective tool for identifying heavy metal ions in aqueous solutions. In addition, Congo red (CR) adsorption as a function of initial dye concentration and contact time was investigated. For CR dye solutions with concentrations of 5, 10, and 20 mg/L, respectively, the highest removal percentage was determined to be ~99.9%, 85%, and 77%. According to the kinetics investigation, the pseudo-first-order and pseudo-second-order models effectively handle CR adsorption onto CNTs/spiral nails. The increase in the dye concentration from 5 ppm to 20 ppm causes the rate constant to drop from 0.053 to 0.040 min-1. Therefore, our sample can be employed for both the effective degradation of CR dye from wastewater and the detection of heavy metals.