SiO2/carbon fiber-reinforced polypropylene–thermoplastic polyurethane composites: electrical conductivity and mechanical and thermal properties

Microstructural Characterization and Property of Carbon Fiber Reinforced High-Density Polyethylene Composites Fabricated by Fused Deposition Modeling

As a promising industrial thermoplastic polymer material, high-density polyethylene (HDPE) possesses distinct properties of ease to process, good biocompatibility, high recyclability, etc. and has been widely used to make packaging, prostheses and implants, and liquid-permeable membranes. Traditional manufacturing processes for HDPE, including injection molding, thermoforming, and rotational molding, require molds or post processing. In addition, part shapes are highly restricted., Thus, fused deposition modeling (FDM) is introduced to process HDPE materials to take advantage of FDM's free of design, no mold requirement, ease and low cost of processing. To improve the mechanical properties (such as stiffness and strength) and thermal resistance of HDPE, carbon fiber (CF) was incorporated into HDPE, and CF-reinforced HDPE composites were successfully fabricated using FDM process. In addition, the effects of CF content on surface quality, microstructure characterizations, tensile properties, dynamic mechanical properties, and thermal properties have been investigated. Experimental results show that an appropriate CF content addition is beneficial for improving surface quality, and mechanical and thermal properties.

The preparation and evaluation mechanism of mesoporous spherical silica/porous carbon-filled polypropylene composites obtained from coal gasification fine slag

Coal gasification fine slag is a by-product of the entrained-flow gasifier, which has caused some environmental pollution. Through acid dissolution and calcination at different temperatures, mesoporous spherical silica/porous carbon composite filler was prepared using coal gasification fine slag. The particle size and specific surface area of the composite filler decreased with the decrease of unburned carbon content. The analysis of X-ray photoelectron spectroscopy (XPS) indicated the decrease of oxygen-containing functional groups and the increase of C-C groups with the decrease of the content of carbon. The effects of mesoporous spherical silica/porous carbon with different carbon content on the comprehensive properties of filled polypropylene (PP) were studied. The tensile strength and interface interaction increased at first and then decreased with the decrease of carbon content, due to the synergistic effect of mesoporous spherical silica and rough amorphous carbon. The scanning electron microscope showed that the composite filler with the carbon content of 14.47 wt.% at the calcination temperature of 450 °C had the best compatibility with the matrix. Thermodynamic analysis of the PP composites indicated that thermal insulation properties and thermal stability improved with the incorporation of the composite filler. Differential scanning calorimetry (DSC) testing indicated the highest crystallinity of the matrix corresponding to the best comprehensive performances of the composites. XRD patterns revealed that the cooperation of fillers brought characteristic peaks and did not change the primary crystal structure of PP. Simultaneously, heavy calcium powders (CC) were used as comparative fillers, and the overall properties of the PP composites filled with the composite filler were better compared to those of the CC-filled PP composite. The results illustrated that mesoporous spherical silica/porous carbon particles can completely replace CC used in the PP composites, which can be used in auto bumpers, plastic pipes, display cases, and car air deflectors. The CGFS can be processed into a plastic filler for substituting heavy calcium powder particles, which can solve the environmental pollution caused by the accumulation of solid waste.