A modified single-walled carbon nanotubes/carbon-ceramic electrode for simultaneous voltammetric determination of paracetamol and caffeine

Studying the preparation, electrochemical performance testing, comparison and application of a cost-effective flexible graphene working electrode

-A cost-effective flexible graphene working electrode (FGWE) was fabricated using overhead projector transparent film (OPTF) and a screen-printing technique. The surface morphology and electrochemical behavior of the electrode were characterized by scanning electron microscopy and cyclic voltammetry. The electrode presented a very thin layer of conductive ink (16.0 ± 0.7 µm) on a large effective surface area (0.301 ± 0.001 cm^-2). The anodic peak current density (j_pa) of acetaminophen (ACT) in FGWE was 5.2, 3.7, 3.5 and 6.0 times greater than the j_pa of glassy carbon electrode (GCE), flexible carbon working electrode (FCWE), SPE1, and SPE2, respectively. The electrochemical performance of FGWE toward ACT was evaluated by differential pulse voltammetry. Under optimized condition, ACT was quantified in a range of  4-100 µM, with good sensitivity, good accuracy (recovery = 82.3 ± 0.4 to 106 ± 3%), and excellent precision. FGWE was applied to determine ACT in commercial pharmaceutical formulations. The results of the study are in good agreement with those obtained by the standard spectrophotometric method. These results indicate that disposable FGWE is particularly useful for the detection of ACT, and its performance may serve as a platform for cost-effective flexible electrochemical sensors.

Facile Fabrication of Graphene-Supported Pt Electrochemical Sensor for Determination of Caffeine

Because elevated levels of caffeine intake can cause many health complications, it is necessary to develop an accurate, simple, rapid, and cost-effective methodology to quantify caffeine in commonly consumed products. This article discusses electrochemical methods to synthesize platinum-graphene hybrid nanosheets (Pt-GR), and how these methods can be utilized to create a new modified electrode, the platinum-graphene nanohybrid glass carbon electrode (Pt-GR/GCE). The electrochemical behavior of caffeine on Pt-GR/GCE was studied by differential pulse voltammetry (DPV). The results showed that a sensitive oxidation peak was observed at 1.336 V in 0.01 mol L^-1 H₂SO₄ buffer solution, indicating that the Pt-GR/GCE exhibited a good electrooxidation activity towards caffeine. The detection limit is 1.129 × 10^-7 mol L^-1. The modified electrode was applied to the determination of caffeine in real samples with satisfactory electrocatalytic results.

A novel electrochemical analysis of the legal psychoactive drug caffeine using a zeolite/MWCNT modified carbon paste sensor

Caffeine (Caf) is a natural central nervous system stimulant categorized by the US Food and Drug Administration as a safe drug and its maximal amount in soft drinks has been approximately determined to be lower than 200 mg L⁻¹.

A hybrid nanocomposite of CeO2–ZnO–chitosan as an enhanced sensing platform for highly sensitive voltammetric determination of paracetamol and its degradation product p-aminophenol

A highly selective electrochemical sensor was fabricated based on CeO₂–ZnO–chitosan hybrid nanocomposite modified electrode and was successfully applied for the determination of PAR in pharmaceutical formulations.

Tailoring MWCNTs and β-Cyclodextrin for Sensitive Detection of Acetaminophen and Estrogen

Monitoring of trace amount of acetaminophen and estrogen in drinking water is of great importance because of their potential links to gastrointestinal diseases and breast and prostate cancers. The sensitive and accurate detection of acetaminophen and estrogen requires the development of advanced sensing materials that possess appropriate number of analyte-capturing sites and suitable signal conduction path. This can be achieved by implementing appropriate chemical attachment of multiwalled carbon nanotubes (MWCNTs) and β-cyclodextrin (βCD). Here, we report a systematic investigation of four types of modified MWCNT-βCD: (1) physical mixing, (2) "click reaction", (3) thionyl chloride esterification, and (4) Steglich esterification. The Steglich esterification is a one-step approach with shorter reaction time, lower reaction temperature, and eliminates handling of air/moisture-sensitive reagents. MWCNT-βCD prepared by Steglich esterification possessed moderate βCD loading (5-10 wt %), large effective surface area, and fast electron transfer. The host-guest interaction of βCD and redox properties of MWCNT enabled sensitive detection of acetaminophen and 17β-estradiol (E2 is a primary female sex hormone) in the range of 0.005-20 and 0.01-15 μM, with low detection limits of 3.3 and 2.5 nM, respectively. We demonstrated accurate detection results of pharmaceutical compositions in water and urine samples. These results indicate that Steglich esterification method may be applied in fabricating pharmaceutical contaminants sensors for health and environmental applications.

An ultra-sensitive electrochemical sensor for the detection of acetaminophen in the presence of etilefrine using bimetallic Pd–Ag/reduced graphene oxide nanocomposites

In this study we report a one-step procedure for the fabrication of Pd–Ag bimetallic nanoparticles on the surface of a graphene oxide (rGO) support.

Understanding the behavior of caffeine on a boron-doped diamond surface: voltammetric, DFT, QTAIM and ELF studies

A cyclic and differential pulse voltammetry analysis by using a boron doped diamond electrode to understand the behavior of caffeine on its surface was carried out.

Simultaneous electrochemical determination of acetaminophen, caffeine and ascorbic acid using a new electrochemical sensor based on CuO–graphene nanocomposite

A sensor using CuO nanoparticles and graphene was constructed. It is a useful tool for determining of acetaminophen, caffeine and ascorbic acid.