Selective, sensitive and reliable colorimetric sensor for catechol detection based on anti-aggregation of unmodified gold nanoparticles utilizing boronic acid–diol reaction: optimization by experimental design methodology

Plasmonic nanoparticle's anti-aggregation application in sensor development for water and wastewater analysis

Colorimetric sensors have emerged as a powerful tool in the detection of water pollutants. Plasmonic nanoparticles use localized surface plasmon resonance (LSPR)-based colorimetric sensing. LSPR-based sensing can be accomplished through different strategies such as etching, growth, aggregation, and anti-aggregation. Based on these strategies, various sensors have been developed. This review focuses on the newly developed anti-aggregation-based strategy of plasmonic nanoparticles. Sensors based on this strategy have attracted increasing interest because of their exciting properties of high sensitivity, selectivity, and applicability. This review highlights LSPR-based anti-aggregation sensors, their classification, and role of plasmonic nanoparticles in these sensors for the detection of water pollutants. The anti-aggregation based sensing of major water pollutants such as heavy metal ions, anions, and small organic molecules has been summarized herein. This review also provides some personal insights into current challenges associated with anti-aggregation strategy of LSPR-based colorimetric sensors and proposes future research directions.

N,S co-doped Co3O4 core-shell nanospheres with high peroxidase activity for the fast colorimetric detection of catechol

It is necessary to develop nanoperoxidases with high activity to construct a fast and cheap sensing platform for real-time detection of some pollutants. In this study, the as-prepared N and S co-doped core-shell cobaltosic oxide nanospheres (N,S-Co₃O₄) exhibit excellent peroxidase-like activity. The oxidation reaction of the colorless chromogenic substrate TMB by H₂O₂ is used to evaluate the peroxidase-like behaviors of N,S-Co₃O₄. As expected, the N,S-Co₃O₄ nanospheres accelerated the oxidation of TMB accompanied by a blue shift only in 1 min. Thus, the N,S-Co₃O₄ nanoperoxidase exhibits high affinity towards TMB (K_m = 0.072 mM) and H₂O₂ (K_m = 3.78 mM). Moreover, as the catalytic process of N,S-Co₃O₄ can be inhibited in the presence of catechol, a fast inexpensive colorimetric sensor of catechol with high sensitivity and good selectivity was constructed. The enhanced catalytic activity of N,S-Co₃O₄ is attributed to some active species, including h⁺ and ˙O₂^-, owing to the more active sites on N,S-Co₃O₄. The colorimetric method has been validated by detecting catechol in real water samples for practical application.

Colorimetric determination of phenolic compounds using peroxidase mimics based on biomolecule-free hybrid nanoflowers consisting of graphitic carbon nitride and copper

Hybrid nanoflowers consisting of graphitic carbon nitride (GCN) and copper were successfully constructed without the involvement of any biomolecule, by simply mixing them at room temperature to induce proper self-assembly to achieve a flower-like morphology. The resulting biomolecule-free GCN-copper hybrid nanoflowers (GCN-Cu NFs) exhibited an apparent peroxidase-mimicking activity, possibly owing to the synergistic effect from the coordination of GCN and copper, as well as their large surface area, which increased the number of catalytic reaction sites. The peroxidase-mimicking GCN-Cu NFs were then employed in the colorimetric determination of selected phenolic compounds hydroquinone (HQ), methylhydroquinone (MHQ), and catechol (CC). For samples without phenolic compounds, GCN-Cu NFs catalyzed the oxidation of the peroxidase substrate 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂, producing an intense blue color signal. Conversely, in the presence of phenolic compounds, the oxidation of TMB was inhibited, resulting in a significant reduction of the color signal. Using this strategy, HQ, MHQ, and CC were selectively and sensitively determined in a linear range up to 100 μM with detection limits down to 0.82, 0.27, and 0.36 μM, respectively. The practical utility of this assay system was also validated by using it to detect phenolic compounds spiked in tap water, yielding a good recovery of 97.1-108.9% and coefficient of variation below 3.0%, demonstrating the excellent reliability and reproducibility of this strategy. Colorimetric determination of phenolic compounds using peroxidase mimics based on biomolecule-free hybrid nanoflowers consisting of graphitic carbon nitride and copper.

Voltammetric Sensor Based on Molecularly Imprinted Chitosan-Carbon Nanotubes Decorated with Gold Nanoparticles Nanocomposite Deposited on Boron-Doped Diamond Electrodes for Catechol Detection

Phenolic compounds such as catechol are present in a wide variety of foods and beverages; they are of great importance due to their antioxidant properties. This research presents the development of a sensitive and biocompatible molecular imprinted sensor for the electrochemical detection of catechol, based on natural biopolymer-electroactive nanocomposites. Gold nanoparticle (AuNP)-decorated multiwalled carbon nanotubes (MWCNT) have been encapsulated in a polymeric chitosan (CS) matrix. This chitosan nanocomposite has been used to develop a molecular imprinted polymers (MIP) in the presence of catechol on a boron-doped diamond (BDD) electrode. The structure of the decorated MWCNT has been studied by TEM, whereas the characterization of the sensor surface has been imaged by AFM, demonstrating the satisfactory adsorption of the film and the adequate coverage of the decorated carbon nanotubes on the electrode surface. The electrochemical response of the sensor has been analyzed by cyclic voltammetry (CV) where excellent reproducibility and repeatability to catechol detection in the range of 0 to 1 mM has been found, with a detection limit of 3.7 × 10-5 M. Finally, the developed sensor was used to detect catechol in a real wine sample.

Aggregation of Gold Nanoparticles Caused in Two Different Ways Involved in 4-Mercaptophenylboronic Acidand Hydrogen Peroxide

The difference in gold nanoparticle (AuNPs) aggregation caused by different mixing orders of AuNPs, 4-mercaptophenylboronic acid (4-MPBA), and hydrogen peroxide (H₂O₂) has been scarcely reported. We have found that the color change of a ((4-MPBA + AuNPs) + H₂O₂) mixture caused by H₂O₂ is more sensitive than that of a ((4-MPBA + H₂O₂) + AuNPs) mixture. For the former mixture, the color changes obviously with H₂O₂ concentrations in the range of 0~0.025%. However, for the latter mixture, the corresponding H₂O₂ concentration is in the range of 0~1.93%. The mechanisms on the color change originating from the aggregation of AuNPs occurring in the two mixtures were investigated in detail. For the ((4-MPBA + H₂O₂) + AuNPs) mixture, free 4-MPBA is oxidized by H₂O₂ to form bis(4-hydroxyphenyl) disulfide (BHPD) and peroxoboric acid. However, for the ((4-MPBA+AuNPs) + H₂O₂) mixture, immobilized 4-MPBA is oxidized by H₂O₂ to form 4-hydroxythiophenol (4-HTP) and boric acid. The decrease in charge on the surface of AuNPs caused by BHPD, which has alarger steric hindrance, is poorer than that caused by -4-HTP, and this is mainly responsible for the difference in the aggregation of AuNPs in the two mixtures. The formation of boric acid and peroxoboric acid in the reaction between 4-MPBA and H₂O₂ can alter the pH of the medium, and the effect of the pH change on the aggregation of AuNPs should not be ignored. These findings not only offer a new strategy in colorimetric assays to expand the detection range of hydrogen peroxide concentrations but also assist in deepening the understanding of the aggregation of citrate-capped AuNPs involved in 4-MPBA and H₂O₂, as well as in developing other probes.