Simple, rapid, and sensitive electrochemical determination of antithyroid drug methimazole using a boron-doped diamond electrode

From challenge to opportunity: Revolutionizing the monitoring of emerging contaminants in water with advanced sensors

Emerging contaminants in water represent long-term and unpredictable threats to both environmental and human health due to their persistence and bioaccumulation. Current research predominantly focuses on their removal rather than sustained monitoring. This review comprehensively investigates advanced sensor technologies for detecting these contaminants in water, critically evaluating biosensors, optical sensors, electrochemical sensors, and nanomaterial sensors. Elucidating the operational principles, performance metrics such as detection thresholds, and the pros and cons of their practical applications, the review addresses a significant research gap in environmental monitoring. Moreover, it enhances understanding of sensor effectiveness, which in turn guides researchers in selecting the right sensor types for various environmental scenarios. Furthermore, by emphasizing the integration of nanotechnology and the standardization of evaluation protocols, it promotes the development of robust, deployable sensing solutions. Ultimately, this leads to the proposal of a strategic framework aimed at significantly improving the detection capabilities of emerging contaminants and supporting the preservation of environmental health.

The Comparison of Catalytic Activity of Carbimazole and Methimazole on Electroreduction of Zinc (II) in Chlorates (VII): Experimental and Molecular Modelling Study

With the help of electrochemical methods, including CV and EIS, the influence of methimazole, carbimazole, and the concentration of the supporting electrolyte on the kinetics and mechanism of zinc electroreduction on a mercury electrode was compared and analyzed. Moreover, molecular dynamics simulations of zinc/carbimazole and zinc/methimazole solutions were carried out to determine the effect of drugs on the hydration sphere of Zn2+ ions. It was shown that the electroreduction of Zn2+ in the presence of methimazole and carbimazole occurs in two steps and the first one determines the kinetics of the entire process. The presence of both drugs in the solution and the increase in the concentration of the supporting electrolyte reduce the degree of hydration of the depolarizer ions and the hydration of the electrode surface, what is a factor favoring the rate of electroreduction. Based on theoretical studies, the formation of stable complexes between Zn2+ and the molecules of both drugs in a solution was considered unlikely. However, active complexes can be formed between depolarizer ions and molecules adsorbed at the electrode surface. They constitute a bridge facilitating charge exchange during the electrode reaction, revealing the catalytic abilities of methimazole and carbimazole. In the range of cdrug ≤ 1 × 10-3 mol dm-3, carbimazole is a better catalyst, whereas in the range of cdrug ≥ 5 × 10-3 mol dm-3, it is methimazole. The effectiveness of both compounds in catalyzing the first stage of the electrode reaction increases with the increase in the NaClO4 concentration.

A Novel Enhanced-Fluorescent Probe Based on DHLA-Stabilized Red-Emitting Copper Nanoclusters for Methimazole Detection Via Aggregation-Induced Emission Effect

Herein, an aqueous phase synthesis approach was presented for the fabrication of copper nanoclusters (Cu NCs) with aggregation-induced emission (AIE) property, utilizing lipoic acid and NaBH4 as ligands and reducing agent, respectively. The as-synthesized Cu NCs exhibit an average size of 3.0 ± 0.2 nm and demonstrate strong solid-state fluorescence upon excitation with UV light. However, when dissolved in water, no observable fluorescent emission is detected in the aqueous solution of Cu NCs. Remarkably, the addition of Methimazole induced a significant red fluorescence from the aqueous solution of Cu NCs. This unexpected phenomenon can be ascribed to the aggregation of negatively charged Cu NCs caused by electrostatic interaction with positively charged imidazole groups in Methimazole, resulting in enhanced fluorescence through AIE mechanism. Therefore, there exists an excellent linear correlation between the fluorescent intensities of Cu NCs aqueous solution and the concentration of Methimazole within a range of 0.1-1.5 mM with a low limit of detection of 82.2 µM. Importantly, the designed enhanced-fluorescent nanoprobe based on Cu NCs exhibits satisfactory performance in assaying commercially available Methimazole tablets, demonstrating its exceptional sensitivity, reliability, and accuracy.

A simple and fast flow injection amperometry for the determination of methimazole in pharmaceutical preparations using an unmodified boron-doped diamond electrode

In this work, an automated flow injection analysis (FIA) connected to a boron-doped diamond electrode (BDDE) was originally developed for the analysis of methimazole in pharmaceutical preparations. At a modification-free BDDE, methimazole was easilly oxidized. For the analysis of the mechanisms occurring at the electrode surface, cyclic voltammetry was employed to evaluate the impact of fundamental experimental parameters, such as pH and scan rate, on the BDDE response. For the quantitative detection, the FIA amperometric approach was constructed and used as a fast and sensitive method. The suggested approach provided a broad linear range of 0.5-50 μmol/L and a low detection limit of 10 nmol/L (signal-to-noise ratio = 3). Furthermore, the BDDE was successfully utilized to quantify methimazole in genuine samples from a variety of medicines, and its performance remained steady after more than 50 tests. The findings of amperometric measurements exhibit excellent repeatability, with relative standard deviations of less than 3.9 and 4.7 % for intra-day and inter-day, respectively. The findings indicated that, compared with traditional approaches, the suggested method has the following advantages: quick analysis time, simplicity, highly sensitive output, and no need for complicated operational processes.

A review on analytical methods with special reference to electroanalytical methods for the determination of some anticancer drugs in pharmaceutical and biological samples

It is widely accepted that cancer, the second leading cause of death, is a morbidity with big impacts on the global health. In the last few years, chemo-therapeutic treatment continually induces alone most lengthy consequents, which is extremely harmful for the physiological and psychological health of the patients. In the present research, we discuss the recent techniques for employed for extraction, and quantitative determination of such compounds in pharmaceutical, and biological specimens. In the frame of this information, this review aims to provide basic principles of chromatography, spectroscopy, and electroanalytical methods for the analysis of anticancer drugs published in the last three years. The review also describes the recent developments regarding enhancing the limit of detection (LOD), the linear dynamic range, and so forth. The results show that the LOD for the chromatographic techniques with the UV detector was obtained equaled over the range 2.0 ng mL^-1-0.2 μg mL^-1, whereas the LOD values for analysis by chromatographic technique with the mass spectrometry (MS) detector was found between 10.0 pg mL^-1-0.002 μg mL^-1. The biological fluids could be directly injected to capillary electrophoresis (CE) in cases where the medicine concentration is at the contents greater than mg L^-1 or g L^-1. Additionally, electrochemical detection of the anticancer drugs has been mainly conducted by the voltammetry techniques with diverse modified electrodes, and lower LODs were estimated between 3.0 ng mL^-1-0.3 μg mL^-1. It is safe to say that the analyses of anticancer drugs can be achieved by employing a plethora of techniques such as electroanalytical, spectroscopy, and chromatography techniques.

Boron-Doped Diamond Electrodes: Recent Developments and Advances in View of Electrochemical Drug Sensors

Conductive boron-doped diamond (BDD), in addition to its superior material properties, offers many important advantages that make it an interesting material for electroanalytical studies. It has been considered as an excellent electrode material for electrooxidation of drug active compounds in their dosage forms or in biological materials due to its good physical and chemical properties. It contains not only the largest solvent working potential window compared to other electrode materials, but also it has low background and capacitive currents; lower problems with passivation and it has the ability to withstand extreme potentials, corrosive, and high temperature/pressure environments. The aim of this review is not only to provide a state-of-the-art of diamond electrochemistry but also to serve as a reference point for any researcher wishing to commence work with diamond electrodes and understand electrochemical data. Therefore, it is focused on the carbon-based materials, electrochemical properties of the BDD film electrode, its fundamental research, and its electrochemical pretreatment process are discussed in detail. In this case, there are important studies to show the effective BDD drug sensors for the detection and determination of drugs and the present review critically summarizes the available data in this field between 2015 and 2020.

Current Perspective and Developments in Electrochemical Sensors Modified with Nanomaterials for Environmental and Pharmaceutical Analysis

Background:

Over the past few decades, environmental pollution has appeared to be one of the most crucial global problems. The widespread intensification of numerous hazardous pollutants in the environment need the modern researchers to develop viable, reproducible and cost-effective determination tools for the reliable environmental analysis. The beneficial, as well as perilous, biological compounds are receiving growing interest due to their variable composition which produces advantageous and toxic impacts on human and the environment. Several conventional analytical methods have been established for the pharmaceutical and environmental analysis. However, certain drawbacks limited their practices in the modern rapidly growing era of science and technology. The development of electrochemical sensors has emerged as more beneficial and promising tool as against other traditional analytical approaches, in terms of simplicity, cost-effectiveness, sensitivity, stability and reliability. Nonetheless, the over potential and low anodic/cathodic current response are both considered as bottlenecks for the determination of electroactive entities exploiting electrochemical sensors. Interestingly, these problems can be easily resolved by modifying the electrodes with a variety of conductive materials, especially nanostructures.

Objective:

This review covers different electrochemical methods, reported in the literature, for the environmental and pharmaceutical analysis through simple and cost-effective nanostructures-based sensors. The electrochemical techniques with different modes and the modification of electrodes with highly conductive and prolific polymeric and nanostructured materials used for the determination of different environmental and pharmaceutical samples are the main prominence of this review. Various kinds of nanomaterials, e.g. metal, metal oxide and their composites, have been synthesized for the fabrication of sensitive electrodes.

Conclusion:

Nanostructures played a pivotal role in the modification of electrodes, which substantially enhanced the capability and sensitivity of electrochemical sensors. The proper modification of electrodes has materialized the swift detection of electroactive compounds at very low limits and offered the feasible determination procedure without any kind of signal fluctuation and over potential. In crux, due to their enhanced surface area and excellent catalytic properties, nanomaterials recently appeared as the most promising candidates in the field of electrode modification and significantly impacted the detection protocols for various environmental pollutants, viz. pesticides, metal ions and drugs.