Novel perovskite nanocatalyst (BiFeO3) for the photodegradation of rhodamine B/tartrazine and swift reduction of nitro compounds

Antibiotic photocatalysis and antimicrobial activity of low-cost multifunctional Fe3O4@HAp nanocomposites

Water contamination by multiple pollutants is a serious environmental issue originating from the many diverse sources of pollution. It has worsened with the appearance of new contaminants, named emerging micropollutants, such as drug residues which are considered a potential threat to human health and/or ecosystems. These require prior treatment before release into the environment. Simultaneous adsorption and photocatalysis as well as solid-liquid separation are promising technologies for water treatment. In order to obtain low cost photoactive nanocomposites, porous and magnetic Fe3O4-hydroxyapatite (wFeHAp) nanocomposites were prepared by soft chemistry from the dissociation of natural phosphate into Ca2+ and H3PO4 precursors, further neutralized by ammonia in the presence of preformed Fe3O4 particles. The magnetic nanocomposites were characterized and examined as effective antibacterial agents. Fe3O4 association with apatite modifies the surface properties of the wFeHAp nanocomposite materials, yielding efficient antimicrobial activity for S. aureus, B. subtilis, E. coli and K. pneumoniae strains. The photocatalytic removal of ciprofloxacin (CPF) and oxytetracyclin (OXT) antibiotics in water was also evaluated. The wFeHAp nanocomposites adsorbed and degraded the selected antibiotics successfully. Toxicity evaluation of the treated water after photodegradation using the four strains demonstrates the absence of toxic by-products at the end of the reaction. Therefore, Fe3O4@HAp nanoparticles are valuable for antimicrobial and photocatalysis applications.

Highly efficient LaMO3 (M = Co, Fe) perovskites catalyzed Fenton's reaction for degradation of direct blue 86

Perovskite-structured catalysts LaMO₃ (M = Co, Fe) were successfully synthesized and attempted to catalyze hydrogen peroxide (H₂O₂) for the degradation of Direct Blue 86 (DB86), a carcinogenic phthalocyanine dye. The heterogeneous Fenton-like reaction revealed that the oxidative power of the LaCoO₃-catalyzed H₂O₂ (LaCoO₃/H₂O₂) process was higher than that of LaFeO₃/H₂O₂. When LaCoO₃ was calcined at 750 °C for 5 h, 100 mg/L of DB86 could be completely degraded within 5 min via LaCoO₃/H₂O₂ system under H₂O₂ 0.0979 mol/L, initial pH 3.0, LaCoO₃ 0.4 g/L, and 25 °C. The oxidative LaCoO₃/H₂O₂ system has a low activation energy (14.68 kJ/mol) for DB86 degradation, indicating that it is a fast reaction process with highly favorable at high reaction temperatures. For the first time, a cyclic reaction mechanism of catalytic LaCoO₃/H₂O₂ system was proposed based on the evidence of coexisting Co^II and Co^III on the LaCoO₃ surface and the presence of HO^• radicals (major), O₂^•- radicals (minor), and ¹O₂ (minor). LaCoO₃ perovskite catalyst was reusable and still maintained reactive with a satisfactory degradation efficiency within 5 min even after five consecutive uses. This study shows that the as-prepared LaCoO₃ is a highly efficient catalyst for phthalocyanine dye degradation.

Ag NPs decorated on the magnetic rod-like hydroxyapatite/MIL-101(Fe) nanocomposite as an efficient catalyst for the reduction of some nitroaromatic compounds and as an effective antimicrobial agent

A rod-like magnetic nanocomposite was successfully synthesized in this work by loading Ag and Fe₃O₄ nanoparticles onto the surface of the hydroxyapatite/MIL-101(Fe) metal-organic framework. Various techniques were used to investigate the crystalline nature, size, morphology, and magnetic and structural properties of the HAP/MIL-101(Fe)/Ag/Fe₃O₄ nanocomposite, including X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy, field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), BET surface area measurements, and zeta potential analysis. The results indicate that the nanocomposite sample is composed of Ag and Fe₃O₄ nanoparticles adhered to rod-like hydroxyapatite/MIL-101(Fe). The catalytic and antibacterial abilities of the as-prepared HAP/MIL-101(Fe)/Ag/Fe₃O₄ were studied. This nanocomposite was utilized as a heterogeneous catalyst for the catalytic reduction of toxic pollutants, including 4-nitrophenol (4-NP), 2-nitrophenol (2-NP), 2,4-dinitrophenol (2,4-NP), 4-nitroaniline (4-NA), and 2-nitroaniline (2-NA) by NaBH₄ in water and at room temperature. These compounds were converted to their amine derivatives within 8-18 min with rate constant values equal to 0.2, 0.3, 0.33, and 0.47 min^-1, respectively. This quaternary magnetic catalyst can be easily separated from the reaction medium using an external magnetic field and reused. The synthesized nanocomposite maintained its efficiency in reducing nitroaromatic compounds after 5 runs, showing the high stability of the catalyst. Besides, the antibacterial activity of the nanocomposite against Gram-negative and Gram-positive bacteria was evaluated using the disk diffusion method. The inhibition zone diameter of the nanocomposite against Staphylococcus aureus, Staphylococcus saprophyticus, and Escherichia coli was measured to be 17, 14, and 12 mm, respectively.

Tailoring the Composition of BaxBO3 (B = Fe, Mn) Mixed Oxides as CO or Soot Oxidation Catalysts in Simulated GDI Engine Exhaust Conditions

Mixed oxides with perovskite-type structure (ABO₃) are promising catalysts for atmospheric pollution control due to their interesting and tunable physicochemical properties. In this work, two series of Ba_xMnO₃ and Ba_xFeO₃ (x = 1 and 0.7) catalysts were synthesized using the sol-gel method adapted to aqueous medium. The samples were characterized by μ-XRF, XRD, FT-IR, XPS, H₂-TPR, and O₂-TPD. The catalytic activity for CO and GDI soot oxidation was determined by temperature-programmed reaction experiments (CO-TPR and soot-TPR, respectively). The results reveal that a decrease in the Ba content improved the catalytic performance of both catalysts, as B0.7M-E is more active than BM-E for CO oxidation, and B0.7F-E presents higher activity than BF for soot conversion in simulated GDI engine exhaust conditions. Manganese-based perovskites (BM-E and B0.7M-E) achieve better catalytic performance than iron-based perovskite (BF) for CO oxidation reaction due to the higher generation of actives sites.

Mechanism and efficiency of photocatalytic triclosan degradation by TiO2/BiFeO3 nanomaterials

Hierarchical porous TiO₂ photocatalytic nanomaterials were fabricated by impregnation and calcination using a peanut shell biotemplate, and TiO₂/BiFeO₃ composite nanomaterials with different doping amounts were fabricated using hydrothermal synthesis. The micromorphology, structure, element composition and valence state of the photocatalyst were analyzed using a series of characterization methods, including X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), BET surface area (BET), X-ray photoelectron spectroscopy (XPS), UV-visible diffuse reflectance (UV-vis), fluorescence spectroscopy (PL) and other technological means. Finally, the degradation mechanism and efficiency of BiFeO₃ composite photocatalyst on the target pollutant triclosan were analyzed using a xenon lamp to simulate sunlight. The results showed that TiO₂/BiFeO₃ catalyst fabricated using a peanut shell biotemplate has a specific surface area of 153.64 m²/g, a band gap of 1.92 eV, and forms heterostructures. The optimum doping amount of TiO₂/BiFeO₃ catalyst was 1 mol/mol, and the degradation rate was 81.2%. The main active substances degraded were ·O₂^-and ·OH. The degradation process measured is consistent with the pseudo-first-order kinetic model.

Application of perovskite oxides and their composites for degrading organic pollutants from wastewater using advanced oxidation processes: Review of the recent progress

In the recent years, perovskite oxides are gaining an increasing amount of attention owing to their unique traits such as tunable electronic structures, flexible composition, and eco-friendly properties. In contrast, their catalytic performance is not satisfactory, which hinders real wastewater remediation. To overcome this shortcoming, various strategies are developed to design new perovskite oxide-based materials to enhance their catalytic activities in advanced oxidation process (AOPs). This review article is to provide overview of basic principle and different methods of AOPs, while the strategies to design novel perovskite oxide-based composites for enhancing the catalytic activities in AOPs have been highlighted. Moreover, the recent progress of their synthesis and applications in wastewater remediation (pertaining to the period 2016-2022) was described, and the related mechanisms were thoroughly discussed. This review article helps scientists to have a clear outlook on the selection and design of new effective perovskite oxide-based materials for the application of AOPs. At the end of the review, perspective on the challenges and future research directions are discussed.

New insight into the regulation mechanism of visible light in naproxen degradation via activation of peroxymonosulfate by MOF derived BiFeO3

BiFeO₃ (BFO) nanocage prepared by metal-organic-framework derivatization (MOF-d) was adopted as activator to first investigate the effect mechanism of visible-light on naproxen-degradation via peroxymonosulfate (PMS) activation. MOF-d BFO expressed more excellent PMS activation ability than hydrothermal-synthetic BFO, due to highly ordered mesopores. A 3.0 times higher pseudo-first-order degradation rate constant was achieved after visible-light introduced. The quenching experiments indicated that the contribution of ROS in naproxen degradation followed the order of SO₄^•->¹O₂ ≈ •OH in MOF-d BFO/PMS/dark system, while changed into h⁺>¹O₂ > >O₂^•-≈SO₄^•-> •OH after visible-light introduced^. EPR tests first revealed that visible-light promoted ¹O₂ yield (non-radical pathway) but suppressed •OH and SO₄^•- generation (free-radical pathways). N₂-purging experiments further proved that ¹O₂ primarily originates from the reaction between h⁺ and PMS, equivalently to that between O₂ and e^--h⁺ in MOF-d BFO/PMS/vis system. Under visible-light, PMS activation via Fe (III) might be hindered by e^- filling on Fe 3d orbital and anion PMS preferred to approach h⁺ rather than e^-, resulting in the decrease of •OH and SO₄^•- yields. Moreover, PMS faces competition from adsorbed-O₂ and oxygen-vacancies for e^- capture. The degradation-pathways for naproxen in dark and under visible light were both proposed in MOF-d BFO/PMS system.

High-yield synthesis of CsPbBr3nanoparticles: diphenylphosphine as a reducing agent and its effect in Pb-seeding nucleation and growth

Based on the reported nucleation mechanisms for CsPbX₃and II-VI/IV-VI quantum dots, CsPbBr₃nanoparticles with a higher reaction-yield (up to 393% mass-increment) were synthetized by the hot-injection method. The introduction of diphenylphosphine (DPP) as a reducing agent improved nanoparticle nucleation and growth, giving out evidence for Pb-seeding in CsPbBr₃nanoparticles formation. Additionally, a clear influence of the DPP in a CsPbBr₃-Cs₄PbBr₆incomplete phase transformation was observed, marked by the appearance of several PbBr₂nanoparticles. This indicated the need for an improved ratio between the stabilizing agents and the precursors, due to the increased number of nucleation sites produced by DPP. The resulting CsPbBr₃nanoparticles showed high quality, as they displayed 70%-90% photoluminescence quantum yield; narrow size distribution with an average nanoparticle size of∼10 nm; and the characteristic cubic morphology reported in previous works. This increment in CsPbBr₃nanoparticles' reaction yield will contribute to making them a more attractive option for different optoelectronic applications.

Graphitic carbon nitride nanosheets (g-C3N4 NS) as dual responsive template for fluorescent sensing as well as degradation of food colorants

In this work, fluorescent g-C₃N₄ NS with laminar morphology and ultrathin thickness were fabricated. The as synthesized NS were well characterized by UV-Visible and Fluorescence spectroscopy, FT-IR, XRD and HR-TEM. The bright blue fluorescent suspension of g-C₃N₄ NS was utilized for efficient detection of food colorant; tartrazine (Tz) and sunset yellow (SY). Both food colorant were able to quench fluorescence of NS efficiently were able to detect them selectively over other interfering analytes. The chemosensor showed linear range response for low concentration of Tz and SY with limit of detection for Tz and SY as 0.0325 μM (32.5 nM) and 0.221 μM (221 nM), respectively. They served as non-toxic and low cost photocatalyst. The catalytic degradation process was confirmed by mass and UV-Visible spectra analysis. The g-C₃N₄ NS served dual role of detection as well as photocatalytic degradation of food colorant.