Photocatalytic degradation of malachite green using hydrothermally synthesized cobalt-doped TiO2 nanoparticles

Green Synthesis, Characterization, and Evaluation of Photocatalytic and Antibacterial Activities of Co3O4-ZnO Nanocomposites Using Calpurnia aurea Leaf Extract

The green synthesis of transition metal oxide nanocomposites using plant extracts is a new and effective method that avoids the involvement of hazardous chemicals. Nondegradable organic pollutants and antibiotic drug resistance have become serious public health issues worldwide. Hence, the main objective of this study is to synthesize Co3O4-ZnO nanocomposites using Calpurnia aurea leaf extract and evaluate its photocatalytic and antibacterial activities. The green synthesized particles were characterized using UV-vis spectra, Fourier transform infrared spectroscopy, X-ray diffraction techniques, and scanning electron microscopy combined with energy-dispersive X-ray studies. The synthesized particles were found to be crystalline in nature with average crystallite sizes of 23.82, 14.79, 15.99, 16.46, and 21.73 nm. Scanning electron microscopy shows the spherical morphology of Co3O4-ZnO NCs, and energy-dispersive X-ray analysis confirms the formation of highly pure ZnO NPs and Co3O4-ZnO NCs. The photocatalytic activity was performed under natural sunlight using malachite green as an organic dye pollutant. The green synthesized ZnO NPs, Co3O4 NPs, 1:4, 1:3, and 1:2 Co3O4-ZnO NCs showed high degradation efficiency after 60 min of irradiation. The synthetic material showed good potential against Staphylococcus aureus and Escherichia coli, with the highest growth inhibition recorded by 1:2 Co3O4-ZnO NCs. The kinetics study of the photocatalytic degradation was confirmed as pseudo first order, and the possible mechanisms for both photocatalytic and antibacterial activities were clearly determined.

Self-doping synthesis of nano-TiO2 with outstanding antibacterial properties under visible light

Nano-TiO2 photocatalysis technology has attracted wide attention because of its safety, nontoxicity and long-lasting performance. However, traditional nano-TiO2 has been greatly limited in its application because its wide band gap can only be activated by ultraviolet light (λ < 387 nm). In this paper, nano-TiO2 was prepared by self-doping method. The synthesized nano-TiO2 was a single anatase crystal type with a particle size of 10 nm and uniform size. In addition, nano-TiO2 has high stability and good dispersion. More importantly, nano-TiO2 exhibits excellent visible light (400-780 nm) activity due to the decrease of bandgap from 3.20 eV to 1.80 eV (less than 2.0 eV) and the presence of a large number of hydroxyl groups on the surface of the nanoparticles. In the antibacterial test, the antibacterial rate of both E.coli and S.aureus was close to 100 % under the irradiation of household low-power LED lamps, showing excellent antibacterial performance, indicating that the prepared nano-TiO2 has broad application prospects in the field of bactericidal and bacteriostatic.

Highly Stable Self-Cleaning Paints Based on Waste-Valorized PNC-Doped TiO2 Nanoparticles

Adding photocatalytically active TiO2 nanoparticles (NPs) to polymeric paints is a feasible route toward self-cleaning coatings. While paint modification by TiO2-NPs may improve photoactivity, it may also cause polymer degradation and release of toxic volatile organic compounds. To counterbalance adverse effects, a synthesis method for nonmetal (P, N, and C)-doped TiO2-NPs is introduced, based purely on waste valorization. PNC-doped TiO2-NP characterization by vibrational and photoelectron spectroscopy, electron microscopy, diffraction, and thermal analysis suggests that TiO2-NPs were modified with phosphate (P=O), imine species (R=N-R), and carbon, which also hindered the anatase/rutile phase transformation, even upon 700 °C calcination. When added to water-based paints, PNC-doped TiO2-NPs achieved 96% removal of surface-adsorbed pollutants under natural sunlight or UV, paralleled by stability of the paint formulation, as confirmed by micro-Fourier transform infrared (FTIR) surface analysis. The origin of the photoinduced self-cleaning properties was rationalized by three-dimensional (3D) and synchronous photoluminescence spectroscopy, indicating that the dopants led to 7.3 times stronger inhibition of photoinduced e-/h+ recombination when compared to a benchmark P25 photocatalyst.

A State-of-Art Review of the Metal Oxide-Based Nanomaterials Effect on Photocatalytic Degradation of Malachite Green Dyes and a Bibliometric Analysis

A wide range of hard contaminants in wastewater is generated from different industries as byproducts of the organic compound. In this review, various metal oxide-based nanomaterials are employed for the photocatalytic removal of malachite green (MG) dye from wastewater. Some cost-effective and appropriate testing conditions are used for degrading these hard dyes to get higher removal efficiency. The effects of specific parameters are considered such as how the catalyst is made, how much dye is in the solution at first, how much nanocatalyst is needed to break down the dye, the initial pH of the dye solution, the type of light source used, the year of publications, and how long the dye has to be exposed to light to be removed. This study suggests that Scopus-based core collected data employ bibliometric methods to provide an objective analysis of global MG dye from 2011 to 2022 (12 years). The Scopus database collects all the information (articles, authors, keywords, and publications). For bibliometric analysis, 658 publications are retrieved corresponding to MG dye photodegradation, and the number of publications increases annually. A bibliometric study reveals a state-of-art review of metal oxide-based nanomaterials' effects on photocatalytic degradation of MG dyes (12 years).

Recent Advancements in TiO2 Nanostructures: Sustainable Synthesis and Gas Sensing

The search for sustainable technology-driven advancements in material synthesis is a new norm, which ensures a low impact on the environment, production cost, and workers' health. In this context, non-toxic, non-hazardous, and low-cost materials and their synthesis methods are integrated to compete with existing physical and chemical methods. From this perspective, titanium oxide (TiO₂) is one of the fascinating materials because of its non-toxicity, biocompatibility, and potential of growing by sustainable methods. Accordingly, TiO₂ is extensively used in gas-sensing devices. Yet, many TiO₂ nanostructures are still synthesized with a lack of mindfulness of environmental impact and sustainable methods, which results in a serious burden on practical commercialization. This review provides a general outline of the advantages and disadvantages of conventional and sustainable methods of TiO₂ preparation. Additionally, a detailed discussion on sustainable growth methods for green synthesis is included. Furthermore, gas-sensing applications and approaches to improve the key functionality of sensors, including response time, recovery time, repeatability, and stability, are discussed in detail in the latter parts of the review. At the end, a concluding discussion is included to provide guidelines for the selection of sustainable synthesis methods and techniques to improve the gas-sensing properties of TiO₂.

Surface functionalized silver-doped ZnO nanocatalyst: a sustainable cooperative catalytic, photocatalytic and antibacterial platform for waste treatment

The different dyes used and discharged in industrial settings and microbial pathogenic issues have raised serious concerns about the content of bodies of water and the impact that dyes and microbes have on the environment and human health. Efficient treatment of contaminated water is thus a major challenge that is of great interest to researchers around the world. In the present work, we have fabricated functionalized silver-doped ZnO nanoparticles (Ag-doped ZnO NPs) via a hydrothermal method for wastewater treatment. X-ray photoelectron spectroscopy analysis confirmed the doping of Ag with ZnO NPs, and X-ray diffractometry analysis showed a decreasing trend in the crystallite size of the synthesized ZnO NPs with increased Ag concentration. Field emission scanning electron microscopy study of pure ZnO NPs and Ag-doped ZnO NPs revealed nanocrystal aggregates with mixed morphologies, such as hexagonal and rod-shaped structures. Distribution of Ag on the ZnO lattice is confirmed by high-resolution transmission electron microscopy analysis. ZnO NPs with 4 wt% Ag doping showed a maximum degradation of ∼95% in 1.5 h of malachite green dye (80 mg L-1) under visible light and ∼85% in 4 h under dark conditions. Up to five successive treatment cycles using the 4 wt% Ag-doped ZnO NP nanocatalyst confirmed its reusability, as it was still capable of degrading ∼86% and 82% of the dye under visible light and dark conditions, respectively. This limits the risk of nanotoxicity and aids the cost-effectiveness of the overall treatment process. The synthesized NPs showed antibacterial activity in a dose-dependent manner. The zone of inhibition of the Ag-doped ZnO NPs was higher than that of the pure ZnO NPs for all doping content. The studied Ag-doped ZnO NPs thus offer a significant eco-friendly route for the effective treatment of water contaminated with synthetic dyes and fecal bacterial load.