Combinatorial effect of stem cells derived from mandible and recombinant human bone morphogenetic protein-2

Strategies to Control or Mimic Growth Factor Activity for Bone, Cartilage, and Osteochondral Tissue Engineering

Growth factors play a critical role in tissue repair and regeneration. However, their clinical success is limited by their low stability, short half-life, and rapid diffusion from the delivery site. Supraphysiological growth factor concentrations are often required to demonstrate efficacy but can lead to adverse reactions, such as inflammatory complications and increased cancer risk. These issues have motivated the development of delivery systems that enable sustained release and controlled presentation of growth factors. This review specifically focuses on bioconjugation strategies to enhance growth factor activity for bone, cartilage, and osteochondral applications. We describe approaches to localize growth factors using noncovalent and covalent methods, bind growth factors via peptides, and mimic growth factor function with mimetic peptide sequences. We also discuss emerging and future directions to control spatiotemporal growth factor delivery to improve functional tissue repair and regeneration.

The Use of Electrospun Organic and Carbon Nanofibers in Bone Regeneration

There has been an increasing amount of research on regenerative medicine for the treatment of bone defects. Scaffolds are needed for the formation of new bone, and various scaffolding materials have been evaluated for bone regeneration. Materials with pores that allow cells to differentiate into osteocytes are preferred in scaffolds for bone regeneration, and porous materials and fibers are well suited for this application. Electrospinning is an effective method for producing a nanosized fiber by applying a high voltage to the needle tip containing a polymer solution. The use of electrospun nanofibers is being studied in the medical field, and its use as a scaffold for bone regeneration therapy has become a topic of growing interest. In this review, we will introduce the potential use of electrospun nanofiber as a scaffold for bone regenerative medicine with a focus on carbon nanofibers produced by the electrospinning method.

Biodegradable Polymers as Drug Delivery Systems for Bone Regeneration

Regenerative medicine has been widely researched for the treatment of bone defects. In the field of bone regenerative medicine, signaling molecules and the use of scaffolds are of particular importance as drug delivery systems (DDS) or carriers for cell differentiation, and various materials have been explored for their potential use. Although calcium phosphates such as hydroxyapatite and tricalcium phosphate are clinically used as synthetic scaffold material for bone regeneration, biodegradable materials have attracted much attention in recent years for their clinical application as scaffolds due their ability to facilitate rapid localized absorption and replacement with autologous bone. In this review, we introduce the types, features, and performance characteristics of biodegradable polymer scaffolds in their role as DDS for bone regeneration therapy.

Optimizing bone wound healing using BMP2 with absorbable collagen sponge and Talymed nanofiber scaffold

BACKGROUND

Bone is a highly vascularized and resilient organ with innate healing abilities, however some bone injuries overwhelm these attributes and require intervention, such as bone tissue engineering strategies. Combining biomaterials and growth factors, such as bone morphogenetic protein 2 (BMP2), is one of the most commonly used tissue engineering strategies. However, use of BMP2 has been correlated with negative clinical outcomes including aberrant inflammatory response, poor quality bone, and ectopic bone.

METHODS

In the present study, a novel poly-n-acetyl glucosamine (pGlcNAc, trade name Talymed) scaffold was utilized in addition to the commonly used acellular collagen sponge (ACS) BMP2 delivery system in a murine calvarial defect model to investigate whether the innate properties of Talymed can reduce the noted negative bone phenotypes associated with BMP2 treatment.

RESULTS

Comparison of murine calvarial defect healing between ACS with and without Talymed revealed that there was no measurable healing benefit for the combined treatment. Healing was most effective utilizing the traditional acellular collagen sponge with a reduced dose of BMP2.

CONCLUSIONS

The results of this investigation lead to the conclusion that excessive dosing of BMP2 may be responsible for the negative clinical side effects observed with this bone tissue engineering strategy. Rather than augmenting the currently used ACS BMP2 bone wound healing strategy with an additional anti-inflammatory scaffold, reducing the dose of BMP2 used in the traditional delivery system results in optimal healing without the published negative side effects of BMP2 treatment.

Testing a novel nanofibre scaffold for utility in bone tissue regeneration

Many variables serve to alter the process of bone remodelling and diminish regeneration including the size and nature of the wound bed and health status of the individual. To overcome these inhibitory factors, tissue-engineered osteoconductive scaffolds paired with various growth factors have been utilized clinically. However, many limitations still remain, for example, bone morphogenetic protein 2 (BMP2) can lead to rampant inflammation, ectopic bone formation, and graft failure. Here, we studied the ability for a nanofiber scaffold (Talymed) to accelerate BMP2 growth factor-induced bone healing compared with the traditional absorbable collagen sponge (ACS) delivery system. One hundred fifty-five adult wild type mice were arranged in 16 groups by time, 4 and 8 weeks, and treatment, ACS or Talymed, loaded with control, low, medium, or high dosages of BMP2. Skulls were subjected to microCT, biomechanical, and histological analysis to assess bone regeneration. The use of Talymed within the defect site was found to decrease the bone volume, bone formation rate, and alkaline phosphatase activity compared with ACS/BMP2 combinations. Interestingly, though Talymed regenerated less bone, the regenerate was found to have a greater hardness value than that of bone within the ACS groups. However, the difference in bone hardness between scaffolds was not detectable by 8 weeks. Based on these results, we found that the nanofiber scaffold generated a better quality of bone regenerate at 4 weeks but, due to the lack of overall bone formation and the inhibition of normal remodelling processes, was not as efficacious as the current clinical standard ACS/BMP2 therapy.

Evaluation of the bisphosphonate effect on stem cells derived from jaw bone and long bone rabbit models: A pilot study

BACKGROUND AND OBJECTIVE

Bisphosphonates have been widely used and the number of patients experiencing medication-related osteonecrosis of the jaw (MRONJ) has been increasing. This study was designed to evaluate the effect of zoledronate on stem cells derived from different tissues.

DESIGN

Stem cells derived from four different tissues were compared using rabbit models (JPO: periosteum from the jaw bone (mandible), JBM: bone marrow from the jaw bone, LPO: periosteum from long bone (tibia), and LBM: bone marrow from long bone). Stem cells were grown in the presence of zoledronate at final concentrations ranging from 10-6M to 10-10M. Morphology was viewed under an inverted microscope, and the analysis of cell proliferation was performed using a Cell Counting Kit-8 (CCK-8) on days 1, 2, 4, and 7.

RESULTS

The CCK-8 results for LBM showed that the increase of CCK-8 values was correlated with a longer incubation time. Compared to the untreated control, growth in the presence of zoledronate at 10-10M and 10-8M resulted in decreased CCK-8 values for LBM on day 7 (P<0.05). The CCK-8 results for JBM, LPO, and JPO on days 1, 2, 4, and 7 showed that the presence of zoledronate did not produce statistically significant changes compared with the untreated control.

CONCLUSION

Zoledronate in the tested concentrations from JBM, LPO, and JPO did not produce noticeable alterations in the viability of mesenchymal stem cells. This in vitro experiment suggests that the occurrence of MRONJ solely in the oral cavity is not due to differences in the cellular proliferation of stem cells in the response to zoledronate.

BMP2-modified injectable hydrogel for osteogenic differentiation of human periodontal ligament stem cells

This is the first report on the development of a covalently bone morphogenetic protein-2 (BMP2)-immobilized hydrogel that is suitable for osteogenic differentiation of human periodontal ligament stem cells (hPLSCs). O-propargyl-tyrosine (OpgY) was site-specifically incorporated into BMP2 to prepare BMP2-OpgY with an alkyne group. The engineered BMP2-OpgY exhibited osteogenic characteristics after in vitro osteogenic differentiation of hPLSCs, indicating the osteogenic ability of BMP2-OpgY. A methoxy polyethylene glycol-(polycaprolactone-(N₃)) block copolymer (MC-N₃) was prepared as an injectable in situ-forming hydrogel. BMP2 covalently immobilized on an MC hydrogel (MC-BMP2) was prepared quantitatively by a simple biorthogonal reaction between alkyne groups on BMP2-OpgY and azide groups on MC-N₃ via a Cu(I)-catalyzed click reaction. The hPLSCs-loaded MC-BMP2 formed a hydrogel almost immediately upon injection into animals. In vivo osteogenic differentiation of hPLSCs in the MC-BMP2 formulation was confirmed by histological staining and gene expression analyses. Histological staining of hPLSC-loaded MC-BMP2 implants showed evidence of mineralized calcium deposits, whereas hPLSC-loaded MC-Cl or BMP2-OpgY mixed with MC-Cl, implants showed no mineral deposits. Additionally, MC-BMP2 induced higher levels of osteogenic gene expression in hPLSCs than in other groups. In conclusion, BMP2-OpgY covalently immobilized on MC-BMP2 induced osteogenic differentiation of hPLSCs as a noninvasive method for bone tissue engineering.