Development of cataplasmic transdermal drug delivery system containing eutectic mixture of lidocaine and prilocaine

Therapeutic Deep Eutectic Solvents: A Comprehensive Review of Their Thermodynamics, Microstructure and Drug Delivery Applications

Deep eutectic solvents (DES) are multicomponent liquids that are usually formed by coupling a hydrogen bond donor and acceptor leading to strong non-covalent (NC) intermolecular networking and profound depression in the melting point of the system. Pharmaceutically, this phenomenon has been exploited to improve drugs' physicochemical properties, with an established DES therapeutic subcategory, therapeutic deep eutectic solvents (THEDES). THEDES preparation is usually via straightforward synthetic processes with little involvement of sophisticated techniques, which, in addition to its thermodynamic stability, make these multi-component molecular adducts a very attractive alternative for drug enabling purposes. Other NC bonded binary systems (e.g., co-crystals and ionic liquids) are utilized in the pharmaceutical field for enhancing drug's behaviours. However, a clear distinction between these systems and THEDES is scarcely discussed in the current literature. Accordingly, this review provides a structure-based categorization for DES formers, a discussion of its thermodynamic properties and phase behaviour, and it clarifies the physicochemical and microstructure boundaries between DES and other NC systems. Additionally, a summary of its preparation techniques and their experimental conditions preparation is supplied. Instrumental analysis techniques can be used to characterize and differentiate DES from other NC mixtures, hence this review draws a road map to for this purpose. Since this work mainly focuses on pharmaceutical applications of DES, all types of THEDES including the highly discussed types (conventional, drugs dissolved in DES and polymer based) in addition to the less discussed categories are covered. Finally, the regulatory status of THEDES was investigated despite the current unclear situation.

Improving Anti-listeria Activity of Thymol Emulsions by Adding Lauric Acid

In this study, a novel emulsion, thymol (Thy) and lauric acid (LA) emulsion (Thy/LA-Emulsion) was prepared by homogenizing eutectic solvent (Thy/LA mixture) and caseinate solution. The effects of different thymol and lauric acid mass ratio on the formation, stability, and antibacterial activity of emulsions were studied. Compared with thymol alone, adding lauric acid (25, 50, and 75%) could enhance the antibacterial efficacy of the emulsions. Among them, Thy/LA_25%-Emulsion could be stored at room temperature for a month without the increase of particle size, indicating that the addition of LA had not impacted the stability of emulsions. Meanwhile, Thy/LA_25%-Emulsion exhibited a greater inhibition zone (3.06 ± 0.12 cm) and required a lower concentration (0.125 mg/mL) to completely inhibit the growth of Listeria monocytogenes. Consequently, Thy/LA_25%-Emulsion demonstrated the best antibacterial activity and physicochemical stability due to its long-term storage stability. Our results suggest that Thy/LA_25%-Emulsion may become a more functional natural antibacterial agent with greater commercial potential owing to its cheaper raw materials, simpler production processes, and better antibacterial effect in the food industry.

Promising Technological and Industrial Applications of Deep Eutectic Systems

Deep Eutectic Systems (DESs) are obtained by combining Hydrogen Bond Acceptors (HBAs) and Hydrogen Bond Donors (HBDs) in specific molar ratios. Since their first appearance in the literature in 2003, they have shown a wide range of applications, ranging from the selective extraction of biomass or metals to medicine, as well as from pollution control systems to catalytic active solvents and co-solvents. The very peculiar physical properties of DESs, such as the elevated density and viscosity, reduced conductivity, improved solvent ability and a peculiar optical behavior, can be exploited for engineering modular systems which cannot be obtained with other non-eutectic mixtures. In the present review, selected DESs research fields, as their use in materials synthesis, as solvents for volatile organic compounds, as ingredients in pharmaceutical formulations and as active solvents and cosolvents in organic synthesis, are reported and discussed in terms of application and future perspectives.

Microneedle Systems for Vaccine Delivery: the story so far

INTRODUCTION

Vaccine delivery via a microneedle (MN) system has been identified as a potential alternative to conventional vaccine delivery. MN can be self-administered, is pain-free and is capable of producing superior immunogenicity. Over the last few decades, significant research has been carried out in this area, and this review aims to provide a comprehensive picture on the progress of this delivery platform.

AREAS COVERED

This review highlights the potential role of skin as a vaccine delivery route using a microneedle system, examines recent advancements in microneedle fabrication techniques, and provides an update on potential preclinical and clinical studies on vaccine delivery through microneedle systems against various infectious diseases. Articles for the review study were searched electronically in PubMed, Google, Google Scholar, and Science Direct using specific keywords to cover the scope of the article. The advanced search strategy was employed to identify the most relevant articles.

EXPERT OPINION

A significant number of MN mediated vaccine candidates have shown promising results in preclinical and clinical trials. The recent emergence of cleanroom free, 3D or additive manufacturing of MN systems and stability, together with the dose-sparing capacity of the Nanopatch® system, have made this platform, commercially, highly lucrative.

QbD-Based Investigation of Dermal Semisolid in situ Film-Forming Systems for Local Anaesthesia

PURPOSE

The aim of our research work was to develop dermally applicable, lidocaine hydrochloride (LID-HCl)-containing semisolid in situ film-forming systems (FFSs) using the Quality by Design (QbD) approach to increase drug permeation into the skin.

METHODS

Silicones were used to improve the properties of formulations and to increase the permeation through the skin. The QbD approach was applied to ensure quality-based development. With initial risk assessment, the critical material attributes (CMAs) and the critical process parameters (CPPs) were identified to ensure the required critical quality attributes (CQAs).

RESULTS

During the initial risk assessment, four high-risk CQAs, namely in vitro drug release, in vitro drug permeation, drying properties, and mechanical properties, and three medium-risk CQAs, namely pH, viscosity, and film appearance were identified and investigated. Moreover, four high-risk CMAs were also considered during the formulation: permeation enhancing excipients, drying excipients, film-forming excipients, and emollients. During the experiments, LID-HCl influenced these critical parameters highly, thereby reducing the drying time. The formulation containing 25% silicone showed the best mechanical properties (49 mN skin adhesion, 20.3% film flexibility, 1.27 N film burst strength), which could predict better patient adherence. In addition, in vitro permeation studies showed that formulation containing 50% silicone has the fastest permeation rate. The flux of diffused API was 6.763 µg/cm2/h, which is much higher compared to the silicone-free formulation (1.5734 µg/cm2/h), and it can already be observed in the lower part of the dermis in 0.5 hour.

CONCLUSION

Our results show that LID-HCl has great influence on the critical parameters of FFSs. The silicone content can improve the applicability of formulations and has a favorable effect on the permeation rate of LID-HCl into the skin.

Laser-induced transient skin disruption to enhance cutaneous drug delivery

The use of pressure waves (PW) to disrupt the stratum corneum (SC) temporarily is an effective strategy to increase the deposition of drug molecules into the skin. However, given the rather modest outcomes when compared with ablation-assisted drug delivery, its potential has been underestimated. Accordingly, the aim of this study was to examine the impact of Resonant Amplitude Waves (RAWs) on increasing cutaneous delivery. RAW phenomena are triggered by focusing a high-peak-power pulsed laser onto an appropriate transducer structure, under space- and time-controlled resolution. In order to determine the optimal conditions for the generation and use of RAWs, a screening of laser parameters setting and an analysis of different geometries of the impact pattern over diverse materials used as transducers was performed, analyzing the footprint of the RAW waves in an agarose gel. The results obtained were then checked and fine-tuned using human skin samples instead of agarose. Furthermore, ex vivo experiments were carried out to characterize the effect of the RAWs in the cutaneous delivery of diclofenac (DIC) and lidocaine (LID) administered in the form of gels. The application of RAWs resulted in an increased delivery of DIC and LID to the skin, whose intensity was dependent on the composition of the formulation. In fact, the maximum observed for DIC and LID in short-time experiments (39.1 ± 11.1 and 153 ± 16 µg/cm², respectively) was comparable to those observed using ablation-assisted drug delivery under the same conditions. In conclusion, the combination of RAWs with specific formulation strategies is a feasible alternative for the cutaneous delivery of drug candidates when short onset of action is required.

Microemulsions based on paeonol-menthol eutectic mixture for enhanced transdermal delivery: formulation development and in vitro evaluation

In this work, microemulsion-based gels were prepared for transdermal delivery of paeonol. Microemulsions containing eutectic mixtures of paeonol and menthol were developed. The obtained microemulsions were evaluated for particle size, viscosity and physical stability. The selected microemulsions were incorporated into Carbopol gels. Drug crystallization behavior during a short-term storage was compared and in vitro permeation and deposition study were conducted on mouse skin. Results showed that the eutectic liquids of paeonol and menthol at all ratio (6:4, 5:5 and 4:6) could form microemulsions but with significantly different physical characteristics. As the ratio of paeonol increased, the prepared microemulsions exhibited larger droplet size, higher viscosity and quicker crystal growth. Microemulsion containing paeonol and menthol at a ratio of 4:6 possessed the smallest size of 27 nm. Accordingly, the related gel showed better physical stability during 10 days of storage, as well as the highest percent of drug deposition (111.8 μg/cm²) and steady-state flux (0.3 μg/cm² h). These results suggested that the microemulsion formulation is a preferable approach for enhanced skin permeation, and the microemulsion based on drug-menthol eutectic mixture might be used as a potential transdermal delivery system for better therapeutic efficacy.

Nanostructured lipid carriers as robust systems for topical lidocaine-prilocaine release in dentistry

In dental practice, local anesthesia causes pain, fear, and stress, and is frequently the reason that patients abandon treatment. Topical anesthetics are applied in order to minimize the discomfort caused by needle insertion and injection, and to reduce the symptoms of superficial trauma at the oral mucosa, but there are still no efficient commercially available formulations. Factorial design is a multivariate data analysis procedure that can be used to optimize the manufacturing processes of lipid nanocarriers, providing valuable information and minimizing development time. This work describes the use of factorial design to optimize a process for the preparation of nanostructured lipid carriers (NLC) based on cetyl palmitate and capric/caprylic triglycerides as structural lipids and Pluronic 68 as the colloidal stabilizer, for delivery of the local anesthetics lidocaine and prilocaine (both at 2.5%). The factors selected were the excipient concentrations, and three different responses were followed: particle size, polydispersity index and zeta potential. The encapsulation efficiency of the most effective formulations (NLC 2, 4, and 6) was evaluated by the ultrafiltration/centrifugation method. The formulations that showed the highest levels of encapsulation were tested using in vitro release kinetics experiments with Franz diffusion cells. The NLC6 formulation exhibited the best sustained release profile, with 59% LDC and 66% PLC released after 20h. This formulation was then characterized using different techniques (IR-ATR, DSC, DRX, TEM, and NTA) to obtain information about its molecular organization and its physicochemical stability, followed during 14months of storage at 25°C. This thorough pre-formulation study represents an important advance towards the development of an efficient pre-anesthetic for use in dentistry.

Advances in topical analgesics

PURPOSE OF REVIEW

The recent increase in opioid consumption in the modern world prompted pain physicians to find new and improved solutions to tackle chronic, refractory pain syndromes. Topical analgesics are emerging as a valued multimodal analgesic arm in the fight against chronic pain.

RECENT FINDINGS

New and improved topical formulations have emerged as effective tools to treat chronic refractory pain. In addition to formulations manufactured by the pharmaceutical industry, there has been a recent interest in mixed topical products by local, regional and national compounding pharmacies. This review will focus on advances in topical analgesics, especially their role as an effective analgesic in nociceptive and neuropathic refractory pain states. We will explore topical analgesics' mechanisms of action and their efficacy as opioid-sparing formulations.

SUMMARY

This review will allow physicians to understand the role of topical agents in the treatment of intractable pain syndromes. Increasing medical providers' familiarity with these agents will allow their incorporation as part of a complex analgesic regimen for an improved pain management plan benefiting the patient population at large.