Sol–gel synthesis and characterization of zinc ferrite–graphene nano-hybrids for photo-catalytic degradation of the paracetamol

Solar light driven degradation of piroxicam and paracetamol by heterogeneous photocatalytic fenton system: Process optimization, mechanistic studies and toxicity assessment

The widespread occurence of pharmaceutical pollutants seriously threatens the environment and human well-being. In the present study, zinc ferrite nanoparticles (ZnFe2O4 NPs) have been synthesized by co-precipitation method and used as photocatalyst for the degradation of two most commonly prescribed painkillers, piroxicam (PXM) and paracetamol (PCM), via heterogeneous Fenton process under the solar light. The synthesized ZnFe2O4 NPs showed a narrower band gap i.e. 1.87 eV, signifying the ability to efficiently work in visible light range. In context of photocatalytic applications, the operational conditions were optimized to achieve maximum degradation. PCM and PXM were completely degraded (100%) at the optimized photocatalytic dose (20 mg L-1), reaction time (180 min), initial drug concentration (10 mg L-1), and pH (6.0), which is close to the natural environment. The extent of mineralization as estimated by the reduction of total organic carbon (TOC) was observed to be ∼91 and 82% for PCM and PXM respectively. Kinetic studies revealed that photocatalytic degradation followed pseudo-first-order kinetics. Moreover, the ZnFe2O4 NPs retained ∼90 % of photocatalytic activity after five consecutive reaction cycles, showing remarkable reusability and stability of catalyst.

Emerging Trends in Zinc Ferrite Nanoparticles for Biomedical and Environmental Applications

Over the last few decades, the application of nanoparticles (NPs) gained immense attention towards environmental and biomedical applications. NPs are ultra-small particles having size ranges from 1 to 100 nm. NPs loaded with therapeutic or imaging compounds have proved a versatile approach towards healthcare improvements. Among various inorganic NPs, zinc ferrite (ZnFe2O4) NPs are considered as non-toxic and having an improved drug delivery characteristics . Several studies have reported broader applications of ZnFe2O4 NPs for treating carcinoma and various infectious diseases. Additionally, these NPs are beneficial for reducing organic and inorganic environmental pollutants. This review discusses about various methods to fabricate ZnFe2O4 NPs and their physicochemical properties. Further, their biomedical and environmental applications have also been explored comprehensively.

Halloysite-TiO2 Nanocomposites for Water Treatment: A Review

Halloysite nanotubes (HNTs) are clay minerals with a tubular structure that can be used for many different applications in place of carbon nanotubes. Indeed, HNTs display low/non-toxicity, are biocompatible, and can be easily prepared. Moreover, the aluminum and silica groups present on HNTs' inner and outer surfaces facilitate the interaction with various functional agents, such as alkalis, organosilanes, polymers, surfactants, and nanomaterials. This allows the deposition of different materials, for instance, metal and non-metal oxides, on different substrate types. This review article first briefly presents HNTs' general structure and the various applications described in the last 20 years (e.g., drug delivery, medical implants, and energy storage). Then, it discusses in detail HNT applications for water purification (inorganic and organic pollutants). It focuses particularly on HNT-TiO₂ composites that are considered very promising photocatalysts due to their high specific surface area and adsorption capacity, large pore volume, good stability, and mechanical features.

Bacteria-Adhesive Nitric Oxide-Releasing Graphene Oxide Nanoparticles for MRPA-Infected Wound Healing Therapy

A bacteria-infected wound can lead to being life-threatening and raises a great economic burden on the patient. Here, we developed polyethylenimine 1.8k (PEI_1.8k) surface modified NO-releasing polyethylenimine 25k (PEI_25k)-functionalized graphene oxide (GO) nanoparticles (GO-PEI_25k/NO-PEI_1.8k NPs) for enhanced antibacterial activity and infected wound healing via binding to the bacterial surface. In vitro antibacterial activity and in vivo wound healing efficacy in an infected wound model were evaluated compared with NO-releasing NPs (GO-PEI_25k/NO NPs). Surface modification with PEI_1.8k can enhance the ability of nanoparticles to adhere to bacteria. GO-PEI_25k/NO-PEI_1.8k NPs released NO in a sustained manner for 48 h and exhibited the highest bactericidal activity (99.99% killing) against methicillin-resistant Staphylococcus aureus (MRSA) and multidrug-resistant Pseudomonas aeruginosa (MRPA) without cytotoxicity to L929 mouse fibroblast cells at 0.1 mg/mL. In the MRPA-infected wound model, GO-PEI_25k/NO-PEI_1.8k NPs showed 87% wound size reduction while GO-PEI_25k/NO NPs showed 23% wound size reduction at 9 days postinjury. Masson trichrome and hematoxylin and eosin staining revealed that GO-PEI_25k/NO-PEI_1.8k NPs enhanced re-epithelialization and collagen deposition, which are comparable to healthy mouse skin tissue. GO-PEI_25k/NO-PEI_1.8k NPs hold promise as effective antibacterial and wound healing agents.

Nano-architectural design of TiO2 for high performance photocatalytic degradation of organic pollutant: A review

In the past several decades, significant efforts have been paid toward photocatalytic degradation of organic pollutants in environmental research. During the past years, titanium dioxide nano-architectures (TiO₂ NAs) have been widely used in water purification applications with photocatalytic degradation processes under Uv/Vis light illumination. Photocatalysis process with nano-architectural design of TiO₂ is viewed as an efficient procedure for directly channeling solar energy into water treatment reactions. The considerable band-gap values and the subsequent short life time of photo-generated charge carriers are showed among the limitations of this approach. One of these effective efforts is the using of oxidation processes with advance semiconductor photocatalyst NAs for degradation the organic pollutants under UV/Vis irradiation. Among them, nano-architectural design of TiO₂ photocatalyst (such as Janus, yolk-shell (Y@S), hollow microspheres (HMSs) and nano-belt) is an effective way to improve oxidation processes for increasing photocatalytic activity in water treatment applications. In the light of the above issues, this study tends to provide a critical overview of the used strategies for preparing TiO₂ photocatalysts with desirable physicochemical properties like enhanced absorption of light, low density, high surface area, photo-stability, and charge-carrier behavior. Among the various nanoarchitectural design of TiO₂, the Y@S and HMSs have created a great appeal given their considerable large surface area, low density, homogeneous catalytic environment, favorable light harvesting properties, and enhanced molecular diffusion kinetics of the particles. In this review was summarized the developments that have been made for nano-architectural design of TiO2 photocatalyst. Additional focus is placed on the realization of interfacial charge and the possibility of achieving charge carriers separation for these NAs as electron migration is the extremely important factor for increasing the photocatalytic activity.

Utility of Biogenic Iron and Its Bimetallic Nanocomposites for Biomedical Applications: A Review

Nanotechnology mainly deals with the production and application of compounds with dimensions in nanoscale. Given their dimensions, these materials have considerable surface/volume ratios, and hence, specific characteristics. Nowadays, environmentally friendly procedures are being proposed for fabrication of Fe nanoparticles because a large amount of poisonous chemicals and unfavorable conditions are needed to prepare them. This work includes an inclusive overview on the economical and green procedures for the preparation of such nanoparticles (flower, fruits, tea, carbohydrates, and leaves). Pure and bimetallic iron nanoparticles, for instance, offer a high bandwidth and excitation binding energy and are applicable in different areas ranging from antibacterial, anticancer, and bioimaging agents to drug delivery systems. Preparation of nano-sized particles, such as those of Fe, requires the application of high quantities of toxic materials and harsh conditions, and naturally, there is a tendency to develop more facile and even green pathways (Sultana, Journal of Materials Science & Technology, 2013, 29, 795–800; Bushra et al., Journal of hazardous materials, 2014, 264, 481–489; Khan et al., Ind. Eng. Chem. Res., 2015, 54, 76–82). This article tends to provide an overview on the reports describing green and biological methods for the synthesis of Fe nanoparticles. The present review mainly highlights selenium nanoparticles in the biomedical domain. Specifically, this review will present detailed information on drug delivery, bioimaging, antibacterial, and anticancer activity. It will also focus on procedures for their green synthesis methods and properties that make them potential candidates for various biomedical applications. Finally, we provide a detailed future outlook.

Heterojunction of N/B/RGO and g-C3N4 anchored magnetic ZnFe2O4@ZnO for promoting UV/Vis-induced photo-catalysis and in vitro toxicity studies

To promote the low photocatalytic efficiency caused by the recombination of electron/hole pairs and widen the photo-response wavelength window, ZnFe₂O₄@ZnO-N/B/RGO and ZnFe₂O₄@ZnO-C₃N₄ ternary heterojunction nanophotocatalysts were designed and successfully prepared through a sol-gel technique. In comparison to bare ZnFe₂O₄ and ZnO, the ZnFe₂O₄-ZnO@N/B/RGO and ZnFe₂O₄@ZnO-C₃N₄ ternary products showed highly improved photocatalytic properties in the degradation of methyl orange (MO) under ultra-violet (UV) and visible light irradiation. Various physicochemical properties of the photocatalysts were evaluated through field emission scanning electron microscopy (FESEM), energy-dispersive X-ray (EDX) analysis, X-ray diffraction (XRD), UV-visible diffuse reflectance spectroscopy (DRS), Fourier transform infrared spectroscopy (FT-IR), and vibrating sample magnetometer (VSM) techniques. The observations indicated that the ternary heterojuncted ZnFe₂O₄@ZnO-N/B/RGO absorbs lower energy visible light wavelengths, which is an enhancement in the photocatalytic properties of ZnFe₂O₄@ZnO loaded on reduced graphene oxide (RGO) nanosheets and graphite-like carbon nitride (g-C₃N₄). This gives the catalyst photo-Fenton degradation properties.

Graphene-Based Composites as Catalysts for the Degradation of Pharmaceuticals

The incessant release of pharmaceuticals into the aquatic environment continues to be a subject of increasing concern. This is because of the growing demand for potable water sources and the potential health hazards which these pollutants pose to aquatic animals and humans. The inability of conventional water treatment systems to remove these compounds creates the need for new treatment systems in order to deal with these class of compounds. This review focuses on advanced oxidation processes that employ graphene-based composites as catalysts for the degradation of pharmaceuticals. These composites have been identified to possess enhanced catalytic activity due to increased surface area and reduced charge carrier recombination. The techniques employed in synthesizing these composites have been explored and five different advanced oxidation processes-direct degradation process, chemical oxidation process, photocatalysis, electrocatalyis processes and sonocatalytic/sono-photocatalytic processes-have been studied in terms of their enhanced catalytic activity. Finally, a comparative analysis of the processes that employ graphene-based composites was done in terms of process efficiency, reaction rate, mineralization efficiency and time required to achieve 90% degradation.

The ZnFe2O4@mZnO–N/RGO nano-composite as a carrier and an intelligent releaser drug with dual pH- and ultrasound-triggered control

Graphical design of the synergistic of nano-carriers for targeted controlled anti-cancer Cur drug delivery and their interactions with site-specific cancer cells and tumor tissues in order to enhance the selectivity of cancer therapy.