Sulfur and nitrogen doped carbon quantum dots for detection of glutathione and reduction of cellular nitric oxide in microglial cells

Photophysical Study of Heteroatom-Doped Carbon Dots-MnO2-Based Nanosensor: Selective Detection of Glutathione in the Nanomolar Level

Heteroatom doping on carbon dots (Cdots) has been developed as an efficient approach to modify its optical and electronic properties. The four different types of heteroatom-doped Cdots (undoped Cdots (u-Cdots, nitrogen-doped Cdots (N-Cdots), sulfur-doped Cdots (Cdots), nitrogen, sulfur codoped Cdots (N, S-Cdots)) have been synthesized through a simple heat treatment of 5 min. Among four different heteroatoms doped nanosensors, N, S-Cdots with MnO2 nanospheres (Mn NS) showed one of the best fluorescents "on-off-on" nanosensors for selective sensing of glutathione (GSH) and cell imaging. N, S-Cdots showed a high fluorescence quantum yield, good photostability, ionic strength, and pH stability. N, S-Cdots with Mn NS demonstrated extremely high fluorescence quenching efficiency and the maximum fluorescence recovery rate after adding GSH to the produced solution. The photophysical study of N, S-Cdots-Mn NS used as a sensor confirms the inner filter effect (IFE) quenching mechanism between them. The developed sensor has an 80 nM limit of detection (LOD) for GSH. The heteroatom-doped framework of Cdots plays a significant role in the sensitive detection of GSH. N, S-Cdots-Mn NS have good permeability, biocompatibility, and low toxicity, due to which it was used in the intracellular imaging of GSH in living cells. The prepared sensor is rapid, economical, less toxic, and highly applicable in diagnosing diseases.

Construction of continuously enhanced fluorescent sensor for detection of glutathione in normal and cancer cells

In this paper, water-soluble cysteamine (CA)-capping CdSe quantum dots (CA-CdSe) could be used as a continuous fluorescent sensor. The CA-CdSe QDs can respond to Ag⁺ with a detection limit of 54.1 nM. Interestingly, CA-CdSe quantum dots combined with Ag⁺ to generate a new nano-fluorescence sensor-Ag⁺ modified CA-CdSe QDs (Ag⁺@CA-CdSe). Ag⁺@CA-CdSe can detect glutathione (GSH) with good sensitivity and anti-interference performance. The detection limit of Ag⁺@CA-CdSe fluorescenct sensor for GSH is as low as 0.74 μM. In addition, the novel nano-fluorescent sensor Ag⁺@CA-CdSe exhibited good cell permeability and was successfully applied to detect exogenous and endogenous GSH concentrations in cells. It could distinguish cancerous and normal cells by in vitro cell fluorescence imaging.

Carbon Nanotube and Its Derived Nanomaterials Based High Performance Biosensing Platform

After the COVID-19 pandemic, the development of an accurate diagnosis and monitoring of diseases became a more important issue. In order to fabricate high-performance and sensitive biosensors, many researchers and scientists have used many kinds of nanomaterials such as metal nanoparticles (NPs), metal oxide NPs, quantum dots (QDs), and carbon nanomaterials including graphene and carbon nanotubes (CNTs). Among them, CNTs have been considered important biosensing channel candidates due to their excellent physical properties such as high electrical conductivity, strong mechanical properties, plasmonic properties, and so on. Thus, in this review, CNT-based biosensing systems are introduced and various sensing approaches such as electrochemical, optical, and electrical methods are reported. Moreover, such biosensing platforms showed excellent sensitivity and high selectivity against not only viruses but also virus DNA structures. So, based on the amazing potential of CNTs-based biosensing systems, healthcare and public health can be significantly improved.

Nanoarchitectonics of neomycin-derived fluorescent carbon dots for selective detection of Fe3+ ions

The first-ever neomycin antibiotic-based carbon dots (Neo-CDs) were synthesized via a low-cost, eco-friendly, and single-step hydrothermal method using neomycin as a single precursor. The as-prepared Neo-CDs exhibited strong and stable blue fluorescence and were well characterized by TEM, UV-vis absorption, fluorescence emission, IR, XRD, Raman and XPS spectroscopy methods. The Neo-CDs showed a well-distributed size within the range of 4.5 to 7.8 nm, comprising various functional groups on the surface of the carbon core. The Neo-CDs exhibited exceptional emission behaviour, and fluorescence quantum yield was calculated to be 55% in double distilled water. Neo-CDs have been used as a fluorescent sensor for selective and sensitive detection of Fe³⁺ ions in aqueous solution in the fluorescence turn-off mode. From the set of metal ions, only the Fe³⁺ ion showed quenching of fluorescence due to photoinduced (PET) electron transfer from Neo-CDs to the half-filled 3d orbital of Fe³⁺ ions. The limit of detection for Fe³⁺ ions was calculated to be 0.854 μM. Further, the quenching efficiency and Stern-Volmer quenching constant have been calculated which are about 94% and 5.6 × 10⁶ M^-1, respectively.

Morphology Effect of One-Dimensional MnO2 Nanostructures on Heteroatom-Doped Carbon Dot-Based Biosensors for Selective Detection of Glutathione

Structural versatility of MnO₂ nanostructures plays a significant role in biosensing applications. So, we have prepared simple and selective "turn-off-on" sensing probes for the detection of glutathione (GSH), based on nitrogen, sulfur codoped carbon dots (N, S-Cdots) and different morphologies of one-dimensional (1-D) MnO₂ nanostructures. N, S-Cdots with a high fluorescence quantum yield (73.42%) were prepared by a green approach through high-temperature pyrolysis in just 5 min. The different morphologies of 1-D MnO₂ nanostructures (nanowires with varying aspect ratios and nanorods) were synthesized through a hydrothermal method by varying the reaction period (8, 10, and 12 h). MnO₂ nanowires prepared at 8 h showed a high specific surface area (34 m² g^-1) with a large aspect ratio. They showed significant fluorescence quenching, Stern-Volmer constants, and binding constants in the presence of N, S-Cdots. Further, ultraviolet-visible absorption, zeta potential, and time decay studies showed that the quenching mechanism of the developed sensing system was the inner filter effect, which was further confirmed by using the Parker equation. The N, S-Cdots-MnO₂ nanowire (with a high aspect ratio) sensing system showed the best limit of detection, i.e., 28.5 μM for GSH. This fast, simple, eco-friendly, and cost-effective sensing system can be further used for real-time biosensing and bioimaging application.

Preparation and Characterization of a Lutein Solid Dispersion to Improve Its Solubility and Stability

Lutein has been used as a dietary supplement for the treatment of eye diseases, especially age-related macular degeneration. For oral formulations, we investigated lutein stability in artificial set-ups mimicking different physiological conditions and found that lutein was degraded over time under acidic conditions. To enhance the stability of lutein upon oral intake, we developed enteric-coated lutein solid dispersions (SD) by applying a polymer, hydroxypropyl methylcellulose acetate succinate (HPMCAS-LF), through a solvent-controlled precipitation method. The SD were characterized in crystallinity, morphology, and drug entrapment. In the dissolution profile of lutein SD, a F80 formulation showed resistance toward the acidic environment under simulated gastric conditions while exhibiting a bursting drug release under simulated intestinal conditions. Our results highlight the potential use of HPMCAS-LF as an effective matrix to enhance lutein bioavailability during oral delivery and to provide novel insights into the eye-care supplement industry, with direct benefits for the health of patients.

Preparation of Gastro-retentive Tablets Employing Controlled Superporous Networks for Improved Drug Bioavailability

The development of an oral formulation that ensures increased bioavailability of drugs is a great challenge for pharmaceutical scientists. Among many oral formulation systems, a drug delivery system employing superporous networks was developed to provide a prolonged gastro-retention time as well as improved bioavailability of drugs with a narrow absorption window in the gastrointestinal tract. Superporous networks (SPNs) were prepared from chitosan by crosslinking with glyoxal and poly(vinyl alcohol) (PVA). The SPNs showed less porosity and decreased water uptake with an increase in the crosslinking density and content of PVA. Gastro-retentive tablets (GRTs) were formulated using hydroxypropyl methylcellulose (HPMC, a hydrophilic polymer) and the prepared SPNs. Ascorbic acid (AA), which is mainly absorbed in the proximal part of the small intestine, was selected as a model drug. The formulated GRTs exhibited no floating lag time and stayed afloat until the end of the dissolution test. The in vitro drug release from the GRTs decreased with a decrease in the water uptake of the SPNs. The profile of drug release from the GRTs corresponded to the first-order and Higuchi drug-release models. Overall, floating tablets composed of the SPNs and HPMC have potential as a favorable platform to ensure sustained release and improved bioavailability of drugs that are absorbed in the proximal part of the small intestine.