Thermosensitive nasal in situ gelling systems of rufinamide formulated using modified tamarind seed xyloglucan for direct nose-to-brain delivery: design, physical characterization, and in vivo evaluation

A simple and sensitive high-performance liquid chromatographic method combined with fluorescence detection for bioanalysis of scopoletin in rat plasma: Application to a pharmacokinetic study

Scopoletin, a coumarin class natural phytoalexin, is present in medicinal plants such as noni (Morinda citrifolia). It exhibits diverse pharmacological properties, including antioxidant, anti-hyperuricemic, and anti-inflammatory effects. The objective of this study was to develop a novel HPLC-fluorescence (HPLC-FL) method for the quantitative analysis of scopoletin in the plasma and to investigate its pharmacokinetics in rats. Sample preparation involved a methanol-based protein precipitation method, and chromatographic separation was conducted using a C18 column with an isocratic mobile phase composed of water and acetonitrile containing 0.1% trifluoroacetic acid. The eluent was detected using an FL detector set to optimized excitation/emission wavelengths of 337/453 nm. Method validation encompassed assessments of selectivity, linearity (1-500 ng/mL), precision, accuracy, recovery, matrix effect, and stability in accordance with the prevailing Food and Drug Administration (FDA) guidelines. The developed method was successfully applied for pharmacokinetic study in rats. To the best of our knowledge, this study is the first application of a simple and sensitive HPLC-FL method for the quantification of scopoletin in a pharmacokinetic study. This method offers a promising alternative for preclinical pharmacokinetic investigations with appropriate modifications and validations and holds potential for clinical applications.

The Method of Direct and Reverse Phase Portraits as a Tool for Systematizing the Results of Studies of Phase Transitions in Solutions of Thermosensitive Polymers

It is shown that a more than significant amount of experimental data obtained in the field of studying systems based on thermosensitive hydrophilic polymers and reflected in the literature over the past decades makes the issue of their systematization and classification relevant. This, in turn, makes relevant the question of choosing the appropriate classification criteria. It is shown that the basic classification feature can be the number of phase transition stages, which can vary from one to four or more depending on the nature of the temperature-sensitive system. In this work, the method of inverse phase portraits is proposed for the first time. It was intended, among other things, to identify the number of phase transition stages. Moreover, the accuracy of this method significantly exceeds the accuracy of the previously used method of direct phase portraits since, for the first time, the operation of numerical differentiation is replaced by the operation of numerical integration. A specific example of the application of the proposed method for the analysis of a previously studied temperature-sensitive system is presented. It is shown that this method also allows for a quantitative comparison between the results obtained by the differential calorimetry method and the turbidimetry method. Issues related to increasing the resolution of the method of direct phase portraits are discussed.

Optimization and in vivo evaluation of triamcinolone acetonide loaded in situ gel prepared using reacted tamarind seed xyloglucan and kappa-carrageenan for ocular delivery

In the current work, triamcinolone acetonide (TAA) loaded dual responsive in situ gelling system was designed and optimized using reacted tamarind seed xyloglucan (RXG) (thermoresponsive) and kappa-Carrageenan (κ-CRG) (ion-sensitive) polymers. Tamarind seed xyloglucan (TSX) was subjected to purification followed by enzymatic treatment to produce RXG with ~40 % reduction in galactose content compared to TSX. RXG was characterized using size exclusion chromatography, Fourier transform infrared and proton nuclear magnetic resonance spectroscopy to confirm the ~40 % reduction in galactoside content compared to TSX. The proportions of RXG and κ-CRG in the in situ gels (TAA loaded RXG-κ-CRG) were optimized based on their rheological properties. The optimized in situ gel exhibited good flow properties at 25 °C, but transformed rapidly into a stronger gel in the presence of STF at 35 °C. The optimized formulation had strong mucoadhesion with good spreadability on the surface of excised goat cornea. The drug release followed zero-order kinetics from the optimized in situ gel. Ex vivo ocular toxicity studies indicate that the optimized formulation was well tolerated. The ocular pharmacokinetic studies in rabbits showed significantly higher and sustained vitreous humor exposure of TAA for optimized in situ gel compared to hydroxypropyl-β-cyclodextrin based aqueous suspension of TAA.

Self-Assembled Lecithin-Chitosan Nanoparticles Improved Rotigotine Nose-to-Brain Delivery and Brain Targeting Efficiency

Rotigotine (RTG) is a non-ergoline dopamine agonist and an approved drug for treating Parkinson’s disease. However, its clinical use is limited due to various problems, viz. poor oral bioavailability (<1%), low aqueous solubility, and extensive first-pass metabolism. In this study, rotigotine-loaded lecithin-chitosan nanoparticles (RTG-LCNP) were formulated to enhance its nose-to-brain delivery. RTG-LCNP was prepared by self-assembly of chitosan and lecithin due to ionic interactions. The optimized RTG-LCNP had an average diameter of 108 nm with 14.43 ± 2.77% drug loading. RTG-LCNP exhibited spherical morphology and good storage stability. Intranasal RTG-LCNP improved the brain availability of RTG by 7.86 fold with a 3.84-fold increase in the peak brain drug concentration (Cmax(brain)) compared to intranasal drug suspensions. Further, the intranasal RTG-LCNP significantly reduced the peak plasma drug concentration (Cmax(plasma)) compared to intranasal RTG suspensions. The direct drug transport percentage (DTP (%)) of optimized RTG-LCNP was found to be 97.3%, which shows effective direct nose-to-brain drug uptake and good targeting efficiency. In conclusion, RTG-LCNP enhanced drug brain availability, showing the potential for clinical application.

Preparation and Optimization of Liposome Containing Thermosensitive In Situ Nasal Hydrogel System for Brain Delivery of Sumatriptan Succinate

Drug absorption is improved by the intranasal route's wide surface area and avoidance of first-pass metabolism. For the treatment of central nervous system diseases such as migraine, intranasal administration delivers the medication to the brain. The study's purpose was to develop an in situ nasal hydrogel that contained liposomes that were loaded with sumatriptan succinate (SS). A thin-film hydration approach was used to create liposomes, and a 3² factorial design was used to optimize them. The optimized liposomes had a spherical shape, a 171.31 nm particle size, a high drug encapsulation efficiency of 83.54%, and an 8-h drug release of 86.11%. To achieve in situ gel formation, SS-loaded liposomes were added to the liquid gelling system of poloxamer-407, poloxamer-188, and sodium alginate. The final product was tested for mucoadhesive strength, viscosity, drug content, gelation temperature, and gelation time. Following intranasal delivery, in vivo pharmacokinetic investigations showed a significant therapeutic concentration of the medication in the brain with a C_max value of 167 ± 78 ng/mL and an area under the curve value of 502 ± 63 ng/min·mL. For SS-loaded liposomal thermosensitive nasal hydrogel, significantly higher values of the nose-to-brain targeting parameters, that is, drug targeting index (2.61) and nose-to-brain drug direct transport (57.01%), confirmed drug targeting to the brain through the nasal route. Liposomes containing thermosensitive in situ hydrogel demonstrated potential for intranasal administration of SS.

Design and evaluation of rufinamide nanocrystals loaded thermoresponsive nasal in situ gelling system for improved drug distribution to brain

Rufinamide (Rufi) is an antiepileptic drug used to manage Lennox-Gastaut Syndrome and partial seizures. The oral bioavailability of Rufi is less due to its poor solubility and low dissolution rate in the gastrointestinal fluids. This results in less amount of drug reaching the brain following the oral administration of drug. Oral formulations of Rufi are prescribed at a high dose and dosing frequency to increase its distribution to the brain. A Rufi loaded thermoresponsive nasal in situ gel which showed significantly high brain concentrations compared to aqueous suspension of Rufi administered through nasal route was developed by our research group and published. In the current work, we have formulated nanocrystals of Rufi and suspended them in a xyloglucan based thermoresponsive gel to improve the nose-to-brain distribution. The particle size, polydispersity index, and yield (%) of the optimized Rufi nanocrystals were 261.2 ± 2.1 nm, 0.28 ± 0.08, and 89.6 ± 2.0 respectively. The narrow PDI indicates that the manufacturing process is reproducible and reliable. Higher % yield suggested that the method of preparation is efficient. The sol-to-gel transition of in situ gel loaded with Rufi nanocrystals was at 32°C which suggested that the formulation transforms into gel at nasal epithelial temperatures. The nasal pharmacokinetic studies showed that Rufi nanocrystals loaded in situ gel produced higher concentration of the drug in brain (higher brain Cmax) and maintained the drug concentrations for longer duration (higher mean residence time) compared to aqueous suspension of Rufi nanocrystals as well aqueous suspension of Rufi and Rufi loaded in situ gel, reported previously. Nanometric size of the Rufi nanocrystals combined with the in situ gelling properties helped the optimized formulation achieve higher brain distribution and also sustain the drug concentrations in brain for longer duration compared to any of the formulations studied by our research group.

Review of Applications and Future Prospects of Stimuli-Responsive Hydrogel Based on Thermo-Responsive Biopolymers in Drug Delivery Systems

Some of thermo-responsive polysaccharides, namely, cellulose, xyloglucan, and chitosan, and protein-like gelatin or elastin-like polypeptides can exhibit temperature dependent sol–gel transitions. Due to their biodegradability, biocompatibility, and non-toxicity, such biomaterials are becoming popular for drug delivery and tissue engineering applications. This paper aims to review the properties of sol–gel transition, mechanical strength, drug release (bioavailability of drugs), and cytotoxicity of stimuli-responsive hydrogel made of thermo-responsive biopolymers in drug delivery systems. One of the major applications of such thermos-responsive biopolymers is on textile-based transdermal therapy where the formulation, mechanical, and drug release properties and the cytotoxicity of thermo-responsive hydrogel in drug delivery systems of traditional Chinese medicine have been fully reviewed. Textile-based transdermal therapy, a non-invasive method to treat skin-related disease, can overcome the poor bioavailability of drugs from conventional non-invasive administration. This study also discusses the future prospects of stimuli-responsive hydrogels made of thermo-responsive biopolymers for non-invasive treatment of skin-related disease via textile-based transdermal therapy.

Rufinamide-Loaded Chitosan Nanoparticles in Xyloglucan-Based Thermoresponsive In Situ Gel for Direct Nose to Brain Delivery

In 2004, the US FDA approved Rufinamide, an anti-epileptic drug under the brand name Banzel^®. In 2015, Banzel^® received approval for its use in pediatric patients (ages 1–4 years). Rufinamide shows low oral bioavailability due to a low dissolution rate resulting in less of the drug reaching the brain. This has led to the high dose and dosing frequency of Rufinamide. In this work, using the principle of design of experiments (DoE), we have formulated Rufinamide-loaded chitosan nanoparticles and suspended them in a solution of a thermoresponsive polymer–tamarind seed xyloglucan to form a nasal in situ gel for direct nose to brain delivery of Rufinamide. The nanoparticles were characterized for particle size, entrapment efficiency, zeta potential, and physical stability. The in situ gel formulations were characterized for rheological properties, stability, and in vivo plasma and brain pharmacokinetics. Pharmacokinetic parameters were computed for aqueous suspension of nanoparticles and in situ gelling formulation for nanoparticles and compared with the pharmacokinetic parameters of an aqueous suspension of plain Rufinamide. The percentage of direct transport efficiency (% DTE) and direct transport percentage (%DTP) values were calculated for all the formulations. The optimized nanoparticle formulation showed a size of 180 ± 1.5 nm, a zeta potential of 38.3 ± 1.5 mV, entrapment efficiency of 75 ± 2.0%, and drug loading of 11 ± 0.3%. The in situ gelling formulation of nanoparticles showed a solution to the gel transition temperature of 32°C. The %DTE values for aqueous suspension of nanoparticles and in situ gelling formulation for nanoparticles were 988.5 and 1177.3 and the %DTP values were 86.06 and 91.5 respectively.

Biomaterials for Drugs Nose-Brain Transport: A New Therapeutic Approach for Neurological Diseases

In the last years, neurological diseases have resulted in a global health issue, representing the first cause of disability worldwide. Current therapeutic approaches against neurological disorders include oral, topical, or intravenous administration of drugs and more invasive techniques such as surgery and brain implants. Unfortunately, at present, there are no fully effective treatments against neurodegenerative diseases, because they are not associated with a regeneration of the neural tissue but rather act on slowing the neurodegenerative process. The main limitation of central nervous system therapeutics is related to their delivery to the nervous system in therapeutic quantities due to the presence of the blood-brain barrier. In this regard, recently, the intranasal route has emerged as a promising administration site for central nervous system therapeutics since it provides a direct connection to the central nervous system, avoiding the passage through the blood-brain barrier, consequently increasing drug cerebral bioavailability. This review provides an overview of the nose-to-brain route: first, we summarize the anatomy of this route, focusing on the neural mechanisms responsible for the delivery of central nervous system therapeutics to the brain, and then we discuss the recent advances made on the design of intranasal drug delivery systems of central nervous system therapeutics to the brain, focusing in particular on stimuli-responsive hydrogels.